• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.533-539
• /
• 1997

Pressure ripple of hydraulic vane pump results form flow ripple due to pump geometry and reverse flow through the discharge port due to compressibility of fluid and result in vibration and noise of connected hydraulic elements. In a ba;anced type vane pump, cam ring curve is important factor to influence the flow ripple. Therefore, to reduce the now ripple, it has been required that optimal selection of seal region by proper design of cam ring and each port position, and notches for preventing the excessive reverse flow. This paper has been performed analytical study of compression characteristics with major design parameter in side plate and cam ring, and examined into the role of notch and radius reduction ratio.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.87-93
• /
• 1998

Pressure ripples of hydraulic vane pump results from flow ripples due to pump geometry and reverse flow through the discharge port due to compressibility of fluid and result in vibration and noise of connected hydraulic elements. In a balanced type vane pump, cam ring curve is important factor to influence the flow ripples. Therefore, to reduce the flow ripple, it has been required that optimal selection of seal region by proper design of cam ring and each port position, and notches for preventing the excessive reverse flow. This paper has been performed analytical study of compression characteristics with major design parameter in side plate and cam ring. and examined into the role of notch and radius reduction ratio.

• 유공압시스템학회논문집
• /
• 제6권3호
• /
• pp.1-9
• /
• 2009

Noise reduction for hydraulic pump is strongly demanded in the market with its efficiency and durability. In order to meet this demand, it is necessary to reveal mechanism for noise and relationship between the important factors. In this paper, mathematical model for cylinder pressure which is primary reason of pulsation and sound noise were established, and examined its pressure profile by simulation. Also, the valve plate of three kind types are manufactured and tested for piston pressure, pressure pulsation, and sound power level based on the tentative standard which is officially recognized.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.140-144
• /
• 1997

Although the cone type venturi flow meter is superior to another differential pressure type flow meter in precision, the venturi is installed at the pipe as an L beam, so that the dynamic load due to drag force and flow-induced force is generated in the flow meter. In this paper we propose a methodology to evaluate this dynamic load directly by using stain-gages attached on the venturi and we discuss about the dynamic characteristics on the basis of flow-induced vibration theory.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.267-272
• /
• 1995

The paper describes an approach for measuring flow ripple generated by oil hydraulic axial piston pumps. Flow ripple has periodic waveforms due to the cyclic nature of a pump's operation, and interacts with the connected hydraulic systems such as pipes and components to produce a pressure ripple, also known as fluid-borne noise. It is indispensable to measure a flow ripple because increasing of vibration and noise caused by a flow ripple has become a point to be considered and has need of solving these problems. The measurement of flow ripple with high frequencies from oil hydraulic axial piston pumps is msde by using the remote instantaneous flow rate measurement method. As a result, the reverse flow through the relief groove in valve plate has an important effect upon a flow ripple generated by a pumps.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.244-250
• /
• 2015

We propose a simulation technique to estimate the reduction effect of the pressure/flow pulsation by analysis of the pulsation variables and notch shape of the valve plate of a swash-plate-type variable piston pump. First, using SimulationX$^{(R)}$, we perform a theoretical kinematic analysis according to the variable swash-plate angle and rotational velocity in order to design a single-piston pump. In designing the notch shape of the valve plate of the swash-plate-type variable piston pump as one of the pulsation variables, we investigate the effect of the pulsation by comparing two notch types (circular type and V type). Then, we extend our analysis to a nine-piston pump model. This paper not only confirms the effect of the pressure/flow pulsation according to pulsation variables but can also be applied to the development of a SimulationX$^{(R)}$-based simulation technique for notch-shape optimization for a swash-plate-type variable piston pump.

• Tribology and Lubricants
• /
• 제27권6호
• /
• pp.314-320
• /
• 2011

Although swash-plate type axial piston pumps have the merits of wide operating conditions and high efficiency, the characteristics of pressure pulsation and flow ripple which result in system noise generation are on-going problems. This research examined the analytic models of the dynamic oil pressure and flow characteristics in the pump. A new mathematical model which considered the pressure behaviors of each cylinder and discharge piping was developed to analyze the pump pressure and flow. This model also considered the leakages in the clearances which many researchers have ignored so far. Using the developed model, numerical calculations were implemented. The results showed that widely used simple model which considered only a single cylinder can not predict actual discrete flow dynamics and that fluid inertia effect has to be considered in the mathematical model. Several critical parameters were discussed such as port volume and discharge resistance on the assumption that the pipe length is not so long. The effect of leakages was studied on the final stage.

• 대한기계학회논문집A
• /
• 제35권3호
• /
• pp.241-250
• /
• 2011

본 논문에서는 하이포 및 에피 사이클로이드 곡선 사이에 원호 곡선을 삽입하여 내부로터를 설계하고 로터 회전시뮬레이션 및 간섭회피를 위한 수정법을 통해 외부로터를 설계하는 방식의 제로터를 개발하였다. 또한 접촉점을 이용한 기존의 유량계산법을 사용할 수 없는 경우에 유량 및 유량맥동을 도출할 수 있는 챔버면적 계산법을 개발하였다. 이와 같은 방식의 제로터는 로터 설계시 첨점 및 루프가 발생하지 않으며, 내부로터의 하이포 사이클로이드 및 원호 곡선 연결점에서 새로운 설계변수인 경사각 $\gamma$가 추가되어 편심량 설정시 첨점 및 루프 발생 방지조건 또는 이끝폭의 설계 한계조건으로부터 제한을 받지 않는다. 따라서 설계자는 편심량 및 각도 $\gamma$를 조절함으로써 실제 산업현장에서 보다 효과적으로 로터 최적설계를 수행할 수 있다.

• 대한기계학회논문집B
• /
• 제39권1호
• /
• pp.89-95
• /
• 2015

터보압축기의 서지는 압축기의 불안정 운전영역으로 주로 소음과 맥동을 유발하며 수회 지속될시 압축기 시스템 전반에 걸쳐 막대한 피해를 입힌다. 압축기의 안전한 운전을 위해서는 서지현상에 대한 특성파악과 제어전략 수립이 중요하다. 서지현상의 제어는 주로 압축가스의 통과유동량 증대, 필요한 헤드 저감, 압축기 회전수 감속, 가스의 바이패스를 통하여 이루어진다. 본 연구에서는 차량용 터보차저에 서지를 유발했을 때 각 운전 구간별 발생되는 압력변동 특성을 연구하고자 한다. 서지 특성 확인을 위한 파라미터는 압축기 입구 유량과 출구 유량, 관경, 회전수 등으로 선정하였다. 입구단과 출구단 유량을 조절하여 서지 압력 변동을 조사한 결과, 출구단 보다는 입구단 유량의 급격한 변화가 서지와 압축기 내구에 더 영향이 크다는 것을 확인하였다.

• 대한기계학회논문집A
• /
• 제38권3호
• /
• pp.295-302
• /
• 2014

내접형 기어펌프의 경우 내구성과 소형화의 장점을 가지고 있으나, 유량증대 및 소음저감의 성능개선이 요구되고 있다. 본 논문에서는 외부로브 형상이 다양한 곡선 조합(타원 1-인볼루트-타원 2)인 경우에 대하여 기구학적 치형 형상 관계식을 유도하고, 창성된 치형에 대해 소음에 관계된 성능인자(압력각, 유량맥동과 미끄럼률)를 예측하여 소음정도를 수치적으로 비교하였다. 또한 이론 해석을 통해 구한 치형형상과 성능인자 예측 알고리즘을 통하여 설계변수와 성능인자간의 영향도를 분석하였고, 분석 결과를 바탕으로 일정한 유량성능을 유지하면서 소음이 저감된 치형의 최적설계를 수행하였다. 해석결과를 바탕으로 제시된 치형의 최적설계에 대한 시제품 제작 및 소음 시험을 통해 설계의 타당성을 검증하였다.