Browse > Article
http://dx.doi.org/10.3795/KSME-A.2014.38.3.295

Optimal Design of Rotor Profile of Internal Gear Pump for Noise Reduction  

Bae, Jun Ho (Research Institute of Mechanical Technology, Pusan Nat'l Univ.)
Bae, Won Byong (Research Institute of Mechanical Technology, Pusan Nat'l Univ.)
Joo, Ung Tak (Research Institute of Mechanical Technology, Pusan Nat'l Univ.)
Kim, Chul (Research Institute of Mechanical Technology, Pusan Nat'l Univ.)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.38, no.3, 2014 , pp. 295-302 More about this Journal
Abstract
An internal gear pump is required to improve the flow rate and noise. Furthermore, such pumps are durable and small in size. In this study, equations of the rotor shape with multiple profiles (ellipse 1-involute-ellipse 2) were derived, and relevant performance parameters (pressure angle, irregularity, and specific sliding) of the internal gear pump to noise were predicted and compared. Rotor profiles and performance parameters were obtained by a prediction algorithm for theoretical analysis, and the effects between the design parameters and the performance parameters were analyzed. Based on the analysis results of the effects, an optimal design of the rotor profile was proposed, and a noise test of the prototype was performed to evaluate the reliability of the design.
Keywords
Rotor Profile; Noise Reduction; Noise Test; Optimal Design; Performance Parameter; Design Parameter;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Fabiani, M., Manco, S., Nervegna, N. and Rundo, M., 1999, "Modelling And Simulation of Gerotor Gearing in Lubricating Oil Pump," SAE, No. 1999-01-0626.
2 Colbourne, J.R., 1975, "Gear Shape and Theoretical Flow Rate in Internal Gear Pumps," Trans. of the CSME, Vol. 3, No. 4, pp. 215-223.
3 Saegusa, Y., Urashima, K., Sugimoto, M., Onoda, M. and Koiso, T., 1984, "Development of Oil-pump Rotors With A Trochoidal Tooth Shape," SAE Paper No. 840454.
4 Beard, J.E., Pennock, G.R. and Stanisic, M.M., 1989, "The Effects of the Design Parameters on the Generated Curvature and Displacement of Epitrochoidal Gerotor Pumps," SAE Paper No. 891831.
5 Mimmi, G. and Pennacchi, P., 2000, "Non-Undercutting Conditions in Internal Gears," Mech. Mach. Theory, Vol. 35, No. 4, pp. 477-490.   DOI   ScienceOn
6 Demenego, A., Vecchiatio, D., Litvin, F.L., Nervegna, N. and Manco, S., 2002, "Design and Simulation of Meshing of a Cycloidal Pump," Mech. Mach. Theory, Vol. 37, No. 3, pp.311-332.   DOI   ScienceOn
7 Lee, S. C., 2006,"Profile Design of the Inner Rotor of a Gerotor by the Composite Curve of Circular Arcs," Journal of the KSTLE, Vol. 22, No. 2, pp. 79-86.   과학기술학회마을
8 Ye, Z., Zhang, W., Huang, Q. and Chen, C., 2006, "Simple Explicit Formulae for Calculating Limit Dimensions to Avoid Undercutting in the Rotor of a Cycloid Rotor Pump," Mech. Mach. Theory, Vol. 41, No. 4, pp.405-414.   DOI   ScienceOn
9 Chang, Y.J., Kim, J.H., Jeon, C.H., Kim, C. and Jung, S.Y., 2007, "Development of an Integrated System for the Automated Design of a Gerotor Oil Pump," ASME Journal of Mechnical Design, Vol. 129, No. 10, pp.1099-1105.   DOI   ScienceOn
10 Hsieh, C.F. and Hwang, J.H., 2007, "Geometric Design for a Gerotor Pump with High Area Efficiency," ASME Journal of Mechanical Design, Vol. 129, No. 12, pp. 1269-1277.   DOI   ScienceOn
11 Sasaki, H., Inui, N., Shimada, Y. and Ogata, D., 2008, "Development of High Efficiency P/M Internal Gear Pump rotor(Megafloid Rotor)," Automotive SEI Technical Review, No. 66, pp.124-128.
12 Choi, T. H., Kim, M. S., Lee, G. S., Jung, S. Y. and Kim, C., 2011,"Design of Gerotor Using Cycloid and Circular-Arc Curves,"Trans. Korean Soc. Mech. Eng. A, Vol. 35, No. 3, pp. 241-250.   과학기술학회마을   DOI   ScienceOn
13 Jung, S. Y., Kim, M. S. and Kim, C., 2011, "Development of a New Gerotor for Oil Pumps with Multiple Profiles (Ellipse1, Involute and Ellipse2)," J. of the KSPE, Vol. 28, No. 5, pp. 614-622.   과학기술학회마을
14 Mimmi, G. and Pennacchi, P., 1997, "Internal Lobe Pump design," Trans. of the CSME, Vol. 21, No.2, pp.109-121.