• Title/Summary/Keyword: 유동 입자층

Search Result 249, Processing Time 0.023 seconds

Groundwater Flow Modeling in a Riverbank Filtration Area, Deasan-Myeon, Changwon City (창원시 대산면 강변여과수 취수부지 주변의 지하수 유동 모델링)

  • Hamm, Se-Yeong;Cheong, Jae-Yeol;Kim, Hyoung-Su;Hahn, Jeong-Sang;Cha, Yong-Hoon
    • Economic and Environmental Geology
    • /
    • v.38 no.1
    • /
    • pp.67-78
    • /
    • 2005
  • Riverbank filtration has been used in advanced countries for 150 years. In Korea, investigations for producing riverbank filtrate started in the Han River, Nakdong River, Geum River, Yeongsan River and Seomjin River basins in the 1990s. The lower part of the Nakdong River has a poorer water quality than the upper part of the river. A water balance analysis and groundwater flow modeling were conducted for the riverbanks of the Nakdong River in Daesan-Myeon, Changwon City. The results of the water balance analysis revealed the groundwater infiltration rate into the aquifer to be 245.26 mm/year (19.68% of the average annual precipitation, 1,251.32 mm). Direct runoff accounts for 153.49 mm/year, evapotranspiration is 723.95 mm/year and baseflow is 127.63 mm/year. According to the groundwater flow modeling, 65% of the total inflow to the pumping wells originates from the Nakdong River, 13% originates from the aquifer in the rectilinear direction, and 22% originates from the aquifer in the parallel direction. The particle tracking model shows that a particle moving from the river toward the pumping wells travels 100 m in 50 days and a particle from the aquifer toward the pumping wells travels 100 m in 100 days.

A Numerical Model for Analysis of Groundwater Flow with Heat Flow in Steady-State (열(熱)흐름을 동반(同伴)한 정상지하수(定常地下水)의 흐름해석(解析) 수치모형(數値模型))

  • Wang, Soo Kyun;Cho, Won Cheol;Lee, Won Hwan
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.11 no.4
    • /
    • pp.103-112
    • /
    • 1991
  • In this study, a numerical model was established and applied to simulate the steady-state groundwater and heat flow in an isotropic, heterogeneous, three dimensional aquifer system with uniform thermal properties and no change of state. This model was developed as an aid in screening large groundwater-flow systems as prospects for underground waste storage. Driving forces on the system are external hydrologic conditions of recharge from precipitation and fixed hydraulic head boundaries. Heat flux includes geothermal heat-flow, conduction to the land surface, advection from recharge, and advection to or from fixed-head boundaries. The model uses an iterative procedure that alternately solves the groundwater-flow and heat-flow equations, updating advective flux after solution of the groundwater-flow equation, and updating hydraulic conductivity after solution of the heat-flow equation. Dierect solution is used for each equation. Travel time is determined by particle tracking through the modeled space. Velocities within blocks are linear interpolations of velocities at block faces. Applying this model to the groundwater-flow system located in Jigyung-ri. Songla-myun, Youngil-gun. Kyungsangbuk-do, the groundwater-flow system including distribution of head, temperature and travel time and flow line, is analyzed.

  • PDF

유기농 이유식 제품 제조 기술 현황과 소비 전망

  • Sin, Hyeon-Ho
    • 한국유가공학회:학술대회논문집
    • /
    • 2006.06a
    • /
    • pp.29-45
    • /
    • 2006
  • 최근에 들어 웰빙(well-being)과 함께 로하스(LOHAS: Lifestyle of Health and Sustainability)란 개념이 급속도로 확산되고 있으며, 이를 만족하는 식품으로 친환경 농산물과 유기 가공 식품이 대두되고 있다. 여러 마케팅 조사에서도 친환경 농산물과 유기 가공 식품의 소비자 선호도는 상당히 높게 나타난다. 이러한 다양한 소비자의 요구에 맞춰 우리의 2세에게 더욱 안전하고 좋은 품질의 이유식을 제공하고 나아가 한계에 이른 '지구와 환경을 해치지 않는 지속가능 한 소비'를 유도하고자 업체들은 유기농 이유식을 개발하고 있다. 유기농 소비자 10명 가운데 7명은 최근의 웰빙 붐 때문에 유기농에 관심을 가지게 됐으며, 가격이 다소 비싸더라도 가족의 건강을 위해 친환경 농산물을 구입하는 것으로 나타났으며, 국내외를 막론하고 친환경 농산물과 유피 가공 식품의 시장 동향을 살펴보면 지속적으로 증가하고 있으나, 아직까지 일반 제품에 비해 미미한 수준이며, 국내는 인증 제도가 없으나, 유기 가공 식품표시기준에 따라 표시되고 있다. 일반적으로 이유식이라 함은 식품공전에서 영 ${\cdot}$ 유아용 곡류 조제식만을 말하지만 넓게 축산물의 조제유류, 영아용 조제식, 성장기용 조제식, 기타 영 ${\cdot}$ 유아식을 포함할 수 있으며, 유기농 이유식 제조 현황을 살펴보면 동결, 분무, 드럼 등의 건조와 퍼핑이나 Extruder를 통한 알파화로 원료를 가공하여 은 살균, 멸균, 균질, 혼합, 건조, 냉각, 포장 등의 다양한 공정으로 이루어진 분무건조나 유동층이나 연속식 과립기를 사용하여 분말이나 입자형 이유식을 생산하며, 동결 건조를 하여 열수를 가해 죽 상태로 먹을 수 있도록 한 제품, 데워서 떠 먹일 수 있도록 병조림이나 레토르트 유동식 제품, 바로 마실 수 있는 쥬스류, 두유류, 과자 등으로 생산하고 있다. 주된 메이저4사는 일동후디스, 남양유업, 매일유업, 파스퇴르유업으로 다양한 제품들을 생산하고 있으며, 두유를 위주로 한 정식품, 연세우유와 종근당건강, 다양한 다국적 기업들의 제품이 수입되고 있는 실정이다. 이유식 시장도 96년 하반기부터 정체를 보이는 상태다. 2002년도 이유식 시장은 약 1,300억원 규모로 업체들의 고가 신제품과 유기농 이유식 출시로 판매 금액은 소폭 상승하였으나 판매 수량은 큰 변동이 없다. 저출산에 따른 양육비 집중과 유기농 제품에 대한 저변이 크게 확산돼 베이비 웰빙은 어느 정도 예견된 일이거니와 이미 미국 등 선진국에선 유아에 그치지 않고 아동까지 유기농과 고급 원료를 사용한 고가의 웰빙 제품이 봇물을 이루고 있는 상황이어서 유아식 시장은 어느 때보다 경쟁이 치열할 것이며, 국내 식품 업체들이 너도나도 유기농 제품과 매장사업에 뛰어들고 있다. 유기 가공 식품의 지속적인 발전을 위해서 (1) 국내산/수입산 공통으로 인증 제도가 도입되고 원료 농산물뿐만 아니라, 모든 공정이나 공장에 대한 종합적 관리와 동일한 인증 표시가 이루어져야 한다. (2) 정부 부처의 이기를 타파할 수 있는 법정부적 기구나 대책이 필요하다. (3) 유기 가공 식품을 취급하는 업계에서는 기존 3%의 비의도적 혼입치의 고려나 상한선 재설정을 요구하고 진정한 유기 가공 식품으로 공정 경쟁한다. (4) 활발한 인증심사원의 교육과 배출로 인증이나 심사기관의 민간 이양을 적극 장려하고 국가관 상호 신뢰를 구축한다. (5) 각 소비자 단체나 소비자는 환경을 살리고 생명체의 공생이라는 관점에서 최선의 길이 유기농 제품임을 인식하고 소비하여 우리의 다음 세대에게서 빌려온 소중한 환경을 물려준다.

  • PDF

Comparison of Catalyst Support Degradation of PEMFC Electrocatalysts Pt/C and PtCo/C (PEMFC 전극촉매 Pt/C와 PtCo/C의 촉매 지지체 열화비교)

  • Sohyeong Oh;Yoohan Han;Minchul Chung;Donggeun Yoo;Kwonpil Park
    • Korean Chemical Engineering Research
    • /
    • v.61 no.3
    • /
    • pp.341-347
    • /
    • 2023
  • In PEMFC, PtCo/C alloy catalysts are widely used because of good performance and durability. However, few studies have been reported on the durability of carbon supports of PtCo/C evaluated at high voltages (1.0~1.5 V). In this study, the durability of PtCo/C catalysts and Pt/C catalysts were compared after applying the accelerated degradation protocol of catalyst support. After repeating the 1.0↔1.5V voltage change cycles, the mass activity, electrochemical surface area (ECSA), electric double layer capacitance (DLC), Pt dissolution and the particle growth were analyzed. After 2,000 cycles of voltage change, the current density per catalyst mass at 0.9V decreased by more than 1.5 times compared to the Pt/C catalyst. This result was because the degradation rate of the carbon support of the PtCo/C catalyst was higher than that of the Pt/C catalyst. The Pt/C catalyst showed more than 1.5 times higher ECSA reduction than the PtCo/C catalyst, but the corrosion of the carbon support of the Pt/C catalyst was small, resulting in a small decrease in I-V performance. In order to improve the high voltage durability of the PtCo/C catalyst, it was shown that improving the durability of the carbon support is essential.

Effects of Changes in Accelerated Degradation Conditions for Catalyst Supports in Polymer Electrolyte Fuel Cell (고분자전해질 연료전지(PEMFC)에서 촉매 지지체 가속 열화 조건 변화의 영향)

  • Sohyeong Oh;Yuhan Han;Donggeun Yoo;Myoung Hwan Kim;Ji Young Park;Youngjin Choi;Kwonpil Park
    • Korean Chemical Engineering Research
    • /
    • v.62 no.1
    • /
    • pp.7-12
    • /
    • 2024
  • The durability of the catalyst support has a significant effect on the durability of proton exchange membrane fuel cells (PEMFC). The accelerated durability evaluation of the catalyst support is performed at a high voltage (1.0 to 1.5 V), and the catalyst and ionomer binder in the catalyst layer are also deteriorated, hindering the evaluation of the durability of the support. The existing protocol (DOE protocol) was improved to find conditions in which the support, which is a durability evaluation target, deteriorates further. A protocol (MDOE) was developed in which the relative humidity was lowered by 35% and the number of voltage changes was reduced. After repeating the 1.0 ↔ 1.5 V voltage change cycle, the catalyst mass activitiy (MA), electrochemical active area (ECSA), electrical double layer capacity (DLC), Pt dissolution and particle growth were analyzed. Reaching 40% reduction in mass activity, the MDOE protocol took only 500 cycles, reducing the number of voltage changes compared to the DOE method and increasing the degradation of the carbon support by 50% compared to the DOE protocol.

Removal of Ammonia-N by using the Immobilized Nitrifier Consortium in Aquaculture System (양어장에서 고정화된 질화세균군을 이용한 암모니아 질소 제거)

  • SUH Kuen-Hack;KIM Yong-Ha;AHN Kab-Hwan
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.30 no.5
    • /
    • pp.868-873
    • /
    • 1997
  • Nitrifier consortium entrapped in Ca and Ba-alginate beads were packed into two reactors and studied for removing ammonia-nitrogen in aquaculture system. The ammonia-nitrogen concentration of the influent was continually kept about 2 ppm. At the hydraulic residence time of 0.6 hours, ammonia-nitrogen removal amount of two reactors was about 52.6 and 51.0 g $NH_3-N/m^3/day$, respectively. The ability of adjusting to an impulsive leading which was happened according to variations of HRT was better at Ba-alginate reactor, but its discrepancy was not so large. At the respect of removing ammonium-nitrogen, two reactors showed the similar ability of treating recirculating water.

  • PDF

Treatment of Spent ion-Exchange Resins from NPP by Supercritical Water Oxidation(SCWO) Process (초임계수 산화공정에 의한 원전 폐수지 처리기술)

  • Kim, Kyeong-Sook;Son, Soon-Hwan;Song, Kyu-Min;Han, Joo-Hee;Han, Kee-Do;Do, Seung-Hoe
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.7 no.3
    • /
    • pp.175-182
    • /
    • 2009
  • The spent cationic exchange resins and anionic exchange resins were separated from mixed spent exchange resins by a fluidized bed gravimetric separator. The separated resins were identified by an elemental analysis and thermogravimetric analysis. The each test sample was prepared by diluting the slurry made by wet ball milling the cationic exchange resins and the anionic exchange resins separated as a spherical granular form for 24 hours. The resulting test samples showed a slurry form of less than $75{\mu}m$ of particle size and 25,000ppm of $COD_{cr}$. The decomposition conditions of each test samples from a thermal power plant were obtained with a lab-scale(reactor volume : 220mL) supercritical water oxidation(SCWO) facility. Then pilot plant(reactor volume : 24 L) tests were performed with the test samples from a thermal power plant and a nuclear power plant successively. Based on the optimal decomposition conditions and the operation experiences by lab-scale facility and the pilot plant, a commercial plant(capacity : 150kg/h) can be installed in a nuclear power plant was designed.

  • PDF

Characteristics of Coal Water Fuel by Various Drying Coals, Surfactants and Particle Size Distribution Using Low Rank Coal (건조된 저등급석탄과 첨가제 및 입자크기에 대한 석탄-물 혼합연료(CWF)의 특성)

  • Kim, Tae Joo;Kim, Sang Do;Lim, Jeong Hwan;Rhee, Young Woo;Lee, Si Hyun
    • Clean Technology
    • /
    • v.19 no.4
    • /
    • pp.464-468
    • /
    • 2013
  • In this study, in order to increase solid content of coal water fuel (CWF), various experimental parameters (i.e., coal type, additive, particle size distribution, drying method) were evaluated. To investigate the drying method, specimen is compared to using flash dry, fluidized bed dry and oil deposit stabilized coal. Difference of the solid content between low rank coal and high rank coal in this case indicate that high rank coal exhibits more higher than 20% of the solid cotent. And specimen for dispersibility was prepared by using dispersing agent of 4 types. As a result, using the dispersing agent was shown 5% higher in sold content than the case of not using the dispersing agent. Efficiency of CWF was improved by using fine coal of 80% in the particle size distribution of coal. Result of CWF using drying methods of 3 types, oil deposit stabilized (ODS) coal dried and stabilized was effective 12% higher in sold content than raw coal.

Numerical Analysis of Nonlinear Shoaling Characteristics over Surf Zone Using SPH and Lagrangian Dynamic Smagronsky Model (Lagrangian Dynamic Smagronsky 난류모형과 SPH를 이용한 쇄파역에서의 비선형 천수거동에 관한 연구)

  • Cho, Yong-Jun;Lee, Heon
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.19 no.1
    • /
    • pp.81-96
    • /
    • 2007
  • Nonlinear shoaling characteristics over surf zone are numerically investigated based on spatially averaged NavierStokes equation. We also test the validity of gradient model for turbulent stresses due to wave breaking using the data acquainted during SUPERTANK LABORATORY DATA COLLECTION PROJECT(Krauss et al., 1992). It turns out that the characteristics length scale of breaking induced current is not negligible, which firmly stands against ever popular gradient model, ${\kappa}-{\varepsilon}$ model, but favors Large Eddy Simulation with finer grid. Based on these observations, we model the residual stress of spatially averaged NavierStokes equation after Lagrangian Dynamic Smagorinsky(Meneveau et al., 1996). We numerically integrate newly proposed wave equations using SPH with Gaussian kernel function. Severely deformed water surface profile, free falling water particle, queuing splash after landing of water particle on the free surface and wave finger due to structured vortex on rear side of wave crest(Narayanaswamy and Dalrymple, 2002) are successfully duplicated in the numerical simulation of wave propagation over uniform slope beach, which so far have been regarded very difficult features to mimic in the computational fluid mechanics.