• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.157-164
• /
• 2016

In this study, researchers performed preliminary design and numerical analysis for a pilot-scale helium heating system intended to support full-scale construction for a sulfur-iodine (SI) cycle. The helium heat exchanger used a liquefied petroleum gas (LPG) combustor. Exhaust gas velocity at the heat exchanger outlet was approximately 40 m/s based on computational thermal and flow analysis. The maximum gas temperature was reached with six baffles in the design; lower gas temperatures were observed with four baffles. The amount of heat transfer was also higher with six baffles. Installation of additional baffles may reduce fuel costs because of the reduced LPG exhausted to the heat exchanger. However, additional baffles may also increase the pressure difference between the exchanger's inlet and outlet. Therefore, it is important to find the optimum number of baffles. Structural analysis, followed by thermal and flow analysis, indicated a 3.86 mm thermal expansion at the middle of the shell and tube type heat exchanger when both ends were supported. Structural analysis conditions included a helium flow rate of 3.729 mol/s and a helium outlet temperature of $910^{\circ}C$. An exhaust gas temperature of $1300^{\circ}C$ and an exhaust gas rate of 52 g/s were confirmed to achieve the helium outlet temperature of $910^{\circ}C$ with an exchanger inlet temperature of $135^{\circ}C$ in an LPG-fueled helium heating system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.285-290
• /
• 2005

Until now, korean aquaculture industry has been grown largely from a quantitative viewpoint. However, an increase of quantity has caused lots of problems producing a derived effect recently. Nearly 82% of korean aquaculture farms had been installed mainly at inshore of the southern sea and also sewage, factory wastes, high density of fishcage at the limited area and autoinfection have deteriorated inshore fisheries. The offshore have been on the rise for the solution to these problems since it has clear seawater reduces the environmental pollution with much current. As a matter of fact, the existing inshore fishcage facilities have trouble advancing to the offshore due to the rough environmental conditons such as a high sea, strong currents etc.; therefore, it is necessary to develop a new cultivating equipment fit the open sea conditons. In this research, the theoretical study and experimental analysis have been carried out for the fishcage design of the structure which is able to use at the open sea.

• Journal of Conservation Science
• /
• v.17 s.17
• /
• pp.5-18
• /
• 2005

Rock materials of the Stone Lantern in the Gwanchoksa temple was composed of dark grey granodiorite. This Stone Lantern is partly structural distortion as S-shape, especially, rocks of the upper supports and under the roof materials were highly deterioration due to the surface exfoliation, and strong secondary contaminations owing to the discoloration by oxidation of inserted iron plates between the rock properties, and white grey to dark black contaminants along the rain path way. Rock surface of the Stone Lantern occurred as partly green patches because of coated by algae, lichen and moss. This biological problems are need for cleaning and treatments. The Stone Lantern have to be considered to conservation method that can reduce weathering factors with long-term monitoring about environmental change for structural stability, surface degradation and mechanical weathering. Materials of the Stone Lantern and basement rocks of the area are consisted of same petrogenetic granodiotite based on occurrences, petrological and geochemical characteristics.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.1
• /
• pp.5-15
• /
• 2021

The areas consisting of frost susceptible soils in cold regions, such as the Arctic area, have problems of frost heave and thaw settlement due to the seasonal air temperature changes and internal temperature of installed structures. Ground stabilization methods for preventing frost heave and thaw settlement of frost susceptible soils include trenching, backfilling and thermo-syphon. The thermo-syphon is the method in which refrigerant can control the ground temperature by transferring the ground temperature to atmosphere in the from of two-phase flow through the heat circulation of the internal refrigerant. This numerical study applied the function of these thermo-syphon as the boundary condition through user-subroutine coding inside ABAQUS and compared and analyzed the temperature results of laboratory experiments.

• Korean Business Review
• /
• v.19 no.1
• /
• pp.157-174
• /
• 2006

In the past, because Korean private venture capital firms could get government support and subsidies, they could be survived in the market without having required management capabilities, advanced venture investment techniques, and professional supporting agencies and institutions. However, business environments have changed a lot recently. Now, only through identifying the optimal financial structures(the ratio of debt to equity), Korean private venture capital firms can minimize investment risks and ensure higher profits. Since Modigliani and Miller(1958) criticized the existence of the optimal financial structure, there have been numerous studies on the optimal financial structure of firms. However, there is no empirical study investigating the financial structure of venture capital firms. The purpose of this article is to analyze the relationship between firm characteristics, financial security indies, and financial profit indices of korean private venture capital firms. We gathered the data from various sources, including the web pages and the financial statements for 2003 and 2004. By using the student's t-test and the correlation analysis, we showed that there are differences in the current ratio and the ratio of net profit to net sales between new and old korean private venture capital firms. Even though it is known that korean private venture capital firms does not have enough knowledge and investment technique to compete with global venture capital firms, our result show that old korean private venture capital firms have already built some knowledge and understanding of venture capital investing.

• Economic and Environmental Geology
• /
• v.39 no.5 s.180
• /
• pp.537-554
• /
• 2006

Water levels of thermal groundwater ($>30^{\circ}C$) were recorded from March 2002 to June 2006 at several monitoring wells within the Yuseong spa area. Using these data, we elucidated the long-term cyclic fluctuations of thermal groundwater levels with 1 year period. We also observed a noticeable water level variation with periods of 0.5, 1 and 7 days in most monitoring wells, which indicates relatively good hydraulic connectivity within the main hotspring area. By comparing water level variations among several wells, we found out that E-W and N-S trending geological structures should be an important control factor for emplacement and flow of thermal groundwater in the study area. It may be also inferred that geothermal source is highly associated with the hydraulic connectivity of aquifers at the Yuseong spa area.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.491-499
• /
• 2002

A p-version finite element model based on degenerate shell element is proposed tot the analysis of orthotropic laminated plates. In the nonlinear formulation of the model, the total Lagrangian formulation is adopted with large deflection and moderate rotation being accounted tot in the sense of yon Karman hypothesis. The material model is based on the Huber-Mises yield criterion and Prandtl-Reuss flow rule in accordance with the theory of strain hardening yield function, which is generalized lot anisotropic materials by introducing the parameters of anisotropy. The model is also based on extension of equivalent-single layer laminate theory(ESL theory) with shear deformation, leading to continuous shear strain at the interface of two layers. The integrals of Legendre polynomials are used for shape functions with p-level varying from 1 to 10. Gauss-Lobatto numerical quadrature is used to calculate the stresses at the nodal points instead of Gauss points. The validity of the proposed P-version finite element model is demonstrated through several comparative points of iew in terms of ultimate load, convergence characteristics, nonlinear effect, and shape of plastic tone.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4656-4663
• /
• 2010

In this study, the 3D computational fluid dynamics (CFD) was performed in relation to the internal fluid characteristics, flow distribution, air mean ages, and residence time for the development of the most optimal model in the complex post-disposal device. As it is expected that a channeling (drift) would be made by the semi-dry reactor due to the large difference in the flow distribution by the compartment in the bag filter, a structural improvement should be urgently made for more uniformed flow distribution in the bag filter. In addition, it showed the possibility that the velocity field and distribution characteristics of the residence time could be improved through a modification to inlet structure of the spray dryer reactor. The complex post-disposal device, modified and supplemented with this analysis, integrated the semi-dry reactor and the bag filter in a single body, so it follows that the improvement can make the device compact, the installation area, the operation fee, and management more convenient.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.2
• /
• pp.49-62
• /
• 2001

Hydrographic surveys were carried out seven times during May 31, 1998 and September 24, 1998 in order to study the physical environments of the coastal area between Narodo Is. and Sorido Is. in the southern sea of Korea (the South Sea) where the occurrence of Cochlodinium polykrikoides red tide is frequently observed in summer. Temperature and salinity of the water column from the surface to the depth of 30 m exhibit large seasonal variations. Mean temperature of the water column increased by 6 and mean salinity of the water column decreased by 2.71 psu during the observation period. Both the freshwater supplied from the adjacent land and the precipitation over the study area cannot account for the observed salinity variations. The influx of the low salinity water from the offshore area is considered to be the main cause for the observed salinity changes. Surface salinity in the study area shows different spatial distribution in the period of outbreaking, mid-stage and disappearance of the red tide. Especially, salinity was abruptly lowered at the stage of disappearance of red tide as compared to salinity of the previous observation period. Vertical structure of water properties also became vertically homogeneous at the disappearance stage, while it was highly stratified in the previous observation. Such changes can only be explained by the inflow of low salinity water from the offshore, which is considered as the most possible cause for the disappearance of the red tide in the study area. This study suggests that exchanges of water, and chemical and biological factors between coastal areas and of shore area in the South Sea need to be studied in association with the general circulation of the South Sea in order for the better understanding of the occurrence and disappearance of the red tide in the coastal area of the South Sea.

• The Journal of Engineering Geology
• /
• v.9 no.1
• /
• pp.31-43
• /
• 1999

This study aims to quantify the distribution characteristics of the fracture system for the numerical modeling of groundwater flow in the north-eastern area of Yosu peninsula. The study area is composed mainly of volcanic rocks and granite. The regional and site scale lineament in the range of magnitude Order 1 to Order 3 were analyzed from the geologic map, air-photograph and shaded relief map. The geometric parameter of Order 4 fracture system was acquired from the scanline survey on the ground surface. There is a similar trend in the preferred orientation between the regional lineament and the Order 4 fracture system except the Set 4 of Order 4 fracture system which is not prominent in the type. That is classified to three fracture sat of high dip angle and one of ow dip angle. From the lineament trend. The orientation of Order 4 fracture system has similar characteristics in each rock termination mode analysis, it is considered that the fracture system was developed systematically and sequentially from Set 1 to Set 4 Filling materials are distinct relatively in low dip angle set. The fracture spacing follows to lognoral distribution and the fracture frequency corrected by the modified Terzaghi correction ranges from 0.38 to 1.01 per mater in each fracture set. The fracture trace lenght also follows to lognormal distribution and ranges from 2.9m to 3.7m in each fracture set.