• Journal of Advanced Marine Engineering and Technology
• /
• 제20권1호
• /
• pp.1-12
• /
• 1996

The fully developed tubulent momentum and heat transfer induced by the square- ribbed roughness elements on both the inner and outer wall surfaces in the concentric annuli are studied analytically based on a modified turbulence model. Heat transfer coefficients for two conditions, i.e, a) inner wall heated as constant heat flux and outer wall insulated b) inner wall insulated and outer wall heated as constant heat flux, are investigated. The analytical results of the fluid flow are verified by experiment. The experiment is done with a pitot tube and a X-type hot wire anemometer to measure the time mean velocity profiles, zero shear stress positions, maximum velocity profiles and friction factors, and etc. The resulting momentum and heat transfer are discussed in terms of various parameters, such as the radius ratio, the relative roughness, the roughness density, Nusselt number and Prandtl number.

• 환경위생공학
• /
• 제11권1호
• /
• pp.39-44
• /
• 1996

The pressure fluctuations in a gas-solid fluidized bed has been analysed using s statistical method interpreting fluidized 냥d behavior. The performing statistical a analysis of the pressure fluctuations in a fluidized bed of 6.7cm-ID. using uniform p particle size of 115 to $1015{\mu}m$ in diameter. The fluidized gas used air(velocity 0.1~1.2m/sec) at settled bed height to diameter ratios which is LlD=l.O. Then, the pressure fluctuations measured by DPT(differantial pressure transducer). The measuring characteristic values of pressure fluctuation were the mean value and standard value, and also, it has been found that the standard deviation of the pressure fluctuations can be effectively used to predict minimum fluidizing velocity and to explain the fluidized phenomena.

• 한국분무공학회지
• /
• 제8권1호
• /
• pp.1-8
• /
• 2003

The flow analysis of the axial fan of rotary burner was performed by SIMPLE(Semi Implicit Method for Pressure Linked Equations) algorithm and finite volume mothod performed in the case of 3-D, incompressible, turbulent flow. In this study, the coordinate transformation was adapted for the complex geometry of axial fan, and the standard $k-{\varepsilon}$ model and wall function method were used for analysis of turbulent flow. Multi-block grid system was used for flow field and divided into four domains such as the inlet, outlet, flow field of rotating vane, and tip clearance. Fan rotation was simulated by rotational motion using MRF(Multiple Rotating Reference Frame) in steady, incompressible state flow.

• 대한기계학회논문집B
• /
• 제23권10호
• /
• pp.1274-1284
• /
• 1999

The Regulatory Guide 1.82 recommends an analysis of hydraulic performance for sump of ECCS (Emergency Core Cooing System) when LOCA(Loss of Coolant Accident) occurs in a nuclear power plant. The present study deals with 3-dimensional, unsteady, turbulent and two-phase flow simulation to examine the behavior of mixture of reactor coolant and debris near the floor of containment building in conjunction with appropriate assumptions. The dispersed solid model has been adjusted to the interfacial momentum transfer between reactor coolant and debris. According to the results, the counterclockwiserecirculation zone had been formed in the region between sump and connection aisle about 376 second after LOCA occurs. The debris thickness accumulated on a sump screen periodically increases or decreases up to 2000 second, afterwards its peak decreases.

• 유변학
• /
• 제8권2호
• /
• pp.92-102
• /
• 1996

두 종류의 열방성 액정고분자와 세종류의 엔지니어링 고분자와의 블렌드들에 대해 유변학적/형구학적 연구를 한 결과 블렌드의 유동거동과 물성이현저히 다른 두 그룹으로 나 뉘어짐을 발견하였다. 즉 연속상의 조업온도가 분산상의 전이온도보다 높은 그룹A에 속하 는 블렌드의 전단점도/신장점도는 액정고분자를 첨가할수록 첨가할수록 감소하고 블렌드의 신장점도는 연속상의 그것처럼 신장변형률속도가 커질수록 증가하였다. 또한 분산상의 점도 가 연속상의 그것보다 작아서 분산상이 미세섬유구조의 형태로 존재하였다. 이와 대조적으 로 연속상의 조업온도가 액정고분자의 전이온도보다 낮은 그룹 B에 속하는 블렌드는 반대 의 거동을 보였고 분산상의 미세섬유구조가 존재하지 않았다. 그러나 연신변형이 주가 되는 방사공정을 거치면 그룹A와 B블렌드 공히 분산상이 비슷한 미세섬유구조의 형태로 존재하 고 기계적 성질도 크게 향상되는 결과를 보였다. 이는 블렌드내의 신장유동이 분산상의 섬 유구조형상에 결정적 역할을 하기 때문이라 판단된다.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.87-93
• /
• 1999

To propose a useful modelling method for an actual muffler, the noise attenuation effects of muffler was investigated according to the flow condition and the hole shape of tubes. In this work, the finite element method was used to calculate the transmission loss of muffler, The noise attenuation characteristics of four different types of muffler in the hole shape of tubes were compared mutually to find a more simple equivalent model. Analytical results showed that the overall value of transmission loss increases and the peaks of transmission loss curve shift to the low frequency with mean flow for the given muffler, Also the noise attenuation characteristics of the equivalent model having the split holes is almost the same as those of the actual muffler having many circular holes.

• 한국태양에너지학회 논문집
• /
• 제32권4호
• /
• pp.82-89
• /
• 2012

This study is on the thermal flow analysis to select an optimal shape of solar lamp bank. Solar Lamp bank is designed by the lamp bank design program based on point light source theory. The reliability of the program for lamp bank design is verified through irradiance variation experiments of a kind of lamp according to horizontal distance. Solar lamp bank facilitates heat distribution and satisfies the irradiance in the three wave length which test guidelines require. Among the 4 kinds of lamp bank, since lamp bank type D satisfies uniformity ${\pm}10%$ and also doesn't exceed total irradiance 1,232 $W/m^2$, type D is finally selected.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2003년도 제20차 정기총회 및 학술발표회
• /
• pp.133-134
• /
• 2003

본 연구결과에서 개발 가공사료급여 시험구와 관행사료 급여구의 산란율과 부화율에서 유의적인 차이를 보이지 않고 있는 점은 관상조류에 개발 가공사료의 이용이 가능한 것으로 판단되었다. 다만 이를 이용하기 위해서는 조류의 사료 섭취습성을 이용한 가공사료의 형태적 측면을 고려하여야 할 것으로 사료되며, 새로운 사료에 대한 적응 및 길들이기를 위해서는 추가적인 연구가 필요한 것으로 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1207-1214
• /
• 2001

The paper deals with the computational approach in analysis and design of pantograph panhead strips of high-speed railway in aerodynamic and aeroacoustic concerns. Pantograph is an equipment such that the electric power is supplied from catenary system to train. Due to the nature of complexity in high-speed fluid flow, turbulence and downstream vortices result in the instability in the aerodynamic contact between panhead strips and catenary system, and consequently generate the considerable levels of flow-induced sound. In this paper, based on the preceding low speed wind-tunnel test and simulations, the aerodynamic and aeroacoustic characteristics in low speed are analyzed.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.271-271
• /
• 2021

샌드댐은 하천 또는 계곡에 보를 설치하여 저류공간을 확보하고 여기에 공극이 큰 모래를 인위적으로 채우거나 상류에서 공급된 토사로 자연적으로 채워지게 한 취수구조물로서 아프리카 등 건조지역에서 물공급 시설로 활용되고 있다. 국내에서는 아직까지 이와 같은 샌드댐 축조 사례는 없지만, 토사유출저감을 위해 설치한 사방댐을 개조하여 취수원으로도 활용하거나 산간 계곡 인근 지중에 차수벽을 설치하여 모래저류조 형태의 물공급 시설을 운영하고 있는 곳이 일부 존재한다. 본 연구에서는 춘천시 북산면 물로리에 실제로 위치한 지중저류조를 대상으로 물수요량을 만족시키는 지를 지하수 유동모델링을 통해 평가하였고, 증가하는 물수요와 가뭄시 물공급 능력 증대를 위한 저류조의 규모 확대 등 구조적 개선 방안을 제시하였다.