• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.799-804
• /
• 2014

To combine to the power transmission, photovoltaic inverter is demanded, because the photovoltaic system is generated direct current power. However, photovoltaic inverter is sensitive to high temperature. In the temperature rising such as at noon and on summer, efficiency of machine is decreased due to the loss increment. Because this problem causes national energy loss according to the expanding the photovoltaic industry, countermeasure is demanded. There, in this paper, we installed a cooling system using a thermoelement regardless of the temperature. Also, we analyze the cooling effect according to the position of two fans which improve the effect maximize.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.280-280
• /
• 2011

유도결합 플라즈마를 이용한 식각 장치에서 플라즈마 균일도 향상에 대한 수많은 연구가 이뤄지고 있다. 안테나의 디자인, 인가 전력과 주파수, 안테나와 기판간의 거리, 기판과 챔버 외벽간의 거리 등 다양한 변수들이 변화되어 왔다. 또한, 최근에는 식각 균일도뿐만 아니라 식각 속도 향상에도 많은 관심이 모아지면서 유동에 영향을 주는 GDP 구조가 다시 중요해지고 있다. 본 연구에서는 300 mm 식각장치를 형상화하고, GDP의 구조와 유량비에 따라 플라즈마의 균일도에 어떻게 영향을 끼지는지 사용 유체역학 전산모사 프로그램인 CFD-ACE+를 이용하여 예측해 보았다. 안테나는 2중 직렬방식으로 안쪽과 바깥쪽의 안테나에 각기 다른 전력을 인가 할 수 있는 구조를 사용했으며, 압력은 10에서 60 mTorr까지 변화시켰다. GDP의 구조는 안쪽 입구와 바깥쪽 입구가 있으며 역시 따로 유량을 조절할 수 있도록 설계하였다. 안쪽 입구는 수직방향을 향하고 있으며, 바깥쪽 입구는 90도 이내의 각을 갖도록 꺾여 있는 것과 수평방향으로 주입할 수 있는 구조, 두 가지를 사용하였다. 유량 비율은 안쪽 입구와 바깥쪽 입구를 2:8, 5:5, 8:2로 고정하였다. 우선 GDP의 구조가 90이내의 각을 갖도록 주입되는 구조에서는 어떤 유량비율에서도 약간의 vortex가 발생했다. 수직방향의 유량이 감소될수록 기판에서 멀리서 발생했으며 강도 또한 감소했다. 기판 표면에서의 압력분포 균일도도 8:2에서 2.8%, 2:8에서 0.6%로 향상되었다. 2:8의 유량 비율에서 압력을 10에서 60 mTorr까지 향상시키면 vortex 효과는 감소되나 기판에서의 압력 균일도가 0.8%까지 약간 나빠졌다. 여기서 발생되는 vortex는 GDP 구조를 수평방향으로 주입되기 함으로서 해결할 수 있었으며, 압력 균일도도 0.2%까지 향상시킬 수 있었다. 또한, 강한 수직방향의 유량은 중심에 발생하는 플라즈마의 중앙을 밀어내는 효과를 확인했으며, 실험적 증명이 추후 연구단계로 진행될 예정이다. 식각 균일도나 식각 속도를 예측하려면 CF계열의 복잡한 가스를 사용해야하기 때문에 유량이 플라즈마에 미치는 영향을 보기 위해서 본 연구에서는 단일종인 Ar 가스만을 사용하였다. 첫 단계로 이와 같이 최적화시킨 유동조건에서 복잡한 식각가스를 이용한 플라즈마 계산은 다음 단계로 준비 중에 있다.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.761-766
• /
• 2018

Droplet-based microfluidic device has led to transformational new approaches in various applications including materials synthesis and high-throughput screening. However, efforts are required to enhance the production rate to industrial scale because of low production rate in a single droplet generator. In here, we present a method for enhancing production rate of monodisperse droplets via parallelization of flow-focusing generators. For this, we fabricated a three-dimensional monolithic elastomer device (3D MED) that has the 3D channel structures in a single layer, using a double-sided imprinting method. We demonstrated that the production rate of monodisperse droplet is increased by controlling the flow rate of continuous and dispersed phases in 3D MED with 8 droplet generators. Thus, we anticipate that this microfluidic system will be used in wide area including microparticle synthesis and screening system via encapsulation of various materials and cells in monodisperse droplets.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.3
• /
• pp.50-57
• /
• 2009

A gas mechanical pulsator is developed for the study of combustion instabilities in various combustors such as LRE combustor. First, it shows that the mass flow rates and the perturbation frequencies can be successively controlled by the inlet pressure and the rotating speed of a rotating disk with many holes. Second, the device is used as an acoustic amplification source as a substitute for the speaker in the previous acoustic tests and its results show almost the same resonant frequency and damping characteristics compared with the previous results. In conclusion, the result shows that it can be used as a substitute for a speaker in the studies of LRE combustion instabilities, which has a flow and no limitation of amplification, and a device for making a perturbation source in gas flow.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.443-448
• /
• 2015

A swirl type mixer was developed to improve the flow mixing performance of a marine selective catalytic reduction system. In this study, the swirl type mixer and a multi-staged swirl type mixer, in which the angle of the vanes at each stage is controllable were considered to provide the optimal region of angles for the mixers. The effects of the vane angles in both mixers on the uniformity index and pressure drop were investigated using a computational fluid dynamics simulation. In the swirl type mixer, the optimal conditions for the flow mixing performance were observed at vane angles from 30 to 60 degrees when vane angles could be adjusted between 10 to 80 degrees, however, the pressure drop increased continually with increasing vane angle of the mixer. On the other hand, control of the individual staged angles of the multi-staged mixer showed that it is possible to keep enhancing flow mixing performance while reducing the pressure drop.

• Journal of computational fluids engineering
• /
• v.10 no.4 s.31
• /
• pp.66-71
• /
• 2005

HANARO, a multi-purpose research reactor, 30 MWth open-tank-in-pool type, is planning to produce a fission moly-99 of radio isotopes, a mother nuclide of Tc-99m, a medical isotope and a target handling tool is under development for loading and unloading it in a circular flow tube (OR-5) of HANARO. A guide tube is extended from the reactor core to the top of the reactor chimney for easily loading the target under a normal operation of the reactor. But active coolant through the core can be quickly raised up to the top of the chimney through the guide tube. The jet flow was suppressed in the guide tube after reducing the inner diameter of a flow restriction orifice installed in the OR-5 flow tube for adding the pressure difference in the flow tube. This paper describes an analytical analysis to calculate the flow distribution in the core of HANARO after suppressing the jet flow of the guide tube. As results, it was confirmed through the analysis results that the flow distribution in the core of HANARO were not adversely affected.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.70-73
• /
• 2005

The HANARO, multi-purpose research reactor, 30 MWth open-tank-in-pool type, is planning to produce a fission moly-99 of radio isotopes, a mother nuclide of Tc-99m, a medical isotope and is under developing a target handling tool for loading and unloading it in a circular flow tube (OR-5). A guide tube is extended from the reactor core to the top of the reactor chimney for easily loading the target under the reactor normal operation. But active coolant through the core can be quickly raised up to the top of the chimney through the guide tube. The jet flow was suppressed in the guide tube after reducing the inner diameter of a flow restriction orifice installed in the OR-5 flow tube for adding the pressure difference in the flow tube after unloading the target. This paper describes an analytical analysis to calculate the flow distribution in the core of the HANARO after suppressing the jet flow of the guide tube. As results, it was confirmed through the analysis results that the flow distribution in the core of the HANARO were not adversely affected.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.45-49
• /
• 2006

The flow around a foil with waterjet was investigated using the two-frame PIV(CACTUS 3.1) system. After separation, unsteady recirculation & reattachment region was shown as a result at reading edge. Separation area was decreased to 1/3 more by waterjet system with coanda effect. Angle of attack and waterjet velocity was a variable in the experiment. Each parameters was controlled to $0^{\circ}{\sim}35^{\circ}$ and 0[m/s]${\sim}$9.2[m/s]. The separation of flow appearanced at first when the angle of attack is $17^{\circ}{\sim}18^{\circ}$. However, according to grew up of velocity, beginning of the separation was delayed. In this experiment, vortex and separation region was disappeared by blown when each parameters are low level, and separation controlled more certainly.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.45-45
• /
• 2010

반도체 및 디스플레이 산업에 사용되는 진공펌프의 효율이 증대됨에 따른 성능 평가 기술의 향상 과 미세 유량을 조절 및 측정할 수 있는 시스템의 개발이 요구되고 있다. 유량 시스템 중 소닉노즐은 기체 유량 측정 표준기로 사용되고 있다. 또한 유량 측정에 있어서 사용상의 편리성, 이동성, 재현성 등 여러 가지의 장점을 가지고 있어 산업 현장에서 많이 사용되고 있다. 본 연구는 소닉노즐을 넓은 유량 범위에서 사용할 수 있도록 소닉노즐의 유출계수 교정을 목적으로 한다. ISO 9300에서 제시한 사양에 맞추어 목 직경 0.03 mm와 0.2 mm 그리고 1.6 mm의 소닉노즐을 제작하였다. 한국표준과학연구원에서 진공용 유량측정 장치로 개발된 정적형 유량계를 이용하여 제작된 3 종의 소닉노즐 유출계수를 확장불확도 3% 이내로 교정하였다. 교정된 소닉노즐의 유량 측정범위는 약 0.6~90, 000 cc/min 범위를 갖는 것으로 나타났으며, 사용유동 조건에 해당되는 레이놀드 수(Reynolds number) 범위는 26~75, 700 으로 확인되었다. 이러한 결과는 교정된 소닉노즐을 이용하여 진공공정에서 필요한 극 미세 유량의 정밀측정을 가능하게한 새로운 연구결과로 판단된다. 교정된 소닉노즐을 이용하여 진공펌프의 배기속도 측정결과는 기 구축된 정적법을 이용한 배기속도 측정결과와 3% 이내의 오차범위내로 매우 잘 일치함을 보였다. 교정된 소닉노즐은 향후 반도체 및 디스플레이 공정에 사용되는 다양한 진공펌프들의 배기속도를 현장에서 간단하게 평가할 수 있는 '현장 성능평가 장치'에 활용할 예정이며, 현재 공정현장에서 배기속도 측정에 널리 사용 중인 MFC를 대체할 수 있을 것으로 예상된다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.37-44
• /
• 1998

Lean burn combustion is an important concept for improving the fuel consumption and exhaust emissions. However, the lean burning is associated with increased cycle-to-cycle combustion variations due to the ignition instabilities and redu- ced flame propagation rates. Engine stability under lean mixture conditions could be improved by increasing flame speed through enhanced flow characteristics and by securing ignitability with improvement of ignition systems. The effects of flow motion and ignition characteristics on the combustion performances were investigated in a 4-valve SI engine. Flow motions of tumble-swirl were varied with a swirl control valve attached at the inlet ports, while ignition energy and its distribution were controlled in a high -frequency ignition system by changing spark duration and spark frequency. The improvement of lean burn performance by the optimum flow motion and ignition characteristics is discussed.