• Applied Chemistry for Engineering
• /
• v.32 no.2
• /
• pp.149-156
• /
• 2021

A kraft recovery boiler produces steam for power generation by the combustion of black liquor from the kraft pulping process. Since saturated steam became superheated in a superheater above the furnace, it is important to increase the heat exchange efficiency for the superheated steam production and power generation. A nose arch at the bottom of the superheater is important for blocking radiation from the furnace which causes corrosion of the superheater. But the nose arch is the main reason for creating a recirculation region and then decreasing the heat exchange efficiency by holding cold flue gas after the heat transfer to saturated steam. In this study, the size of recirculation region and the temperature of flue gas at the outlet were analyzed by the nose arch structure using computational fluid dynamics (CFD). As a result, when the nose arch angle changed from 106.5° (case 1) to 150° (case4), the recirculation region of flue gas decreased and the heat exchange efficiency between the flue gas and the steam increased by 10.3%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.379-389
• /
• 2019

The study empirically investigates financial factors that may influence on corporate R&D intensity during the post-era of the global financial turmoil (from 2010 to 2015) to mitigate possible spillover effect associated with the crisis. Concerning the empirical research settings of the study, chaebol firms listed in the KOSPI stock market are used as sample data with adopting various econometric estimation methods to enhance validity of the results. In the first hypothesis test, it is found that there exist inter-industry financial differences in terms of the ratio of R&D expenditure across all the sample years, but the statistical differences may arise from only a few domestic industries beloning to the high-growth sector. Moreover, it is also interesting to identify that, for the high-tech sector, 3 explanatory variables such as R&D intensity in a prior year, firm size and change in cash holdings are proved to be financial factors to discriminate between chaebol firms and their counterparts of non-chaebol firms, whereas a proportion of tangible assets over total assets as well as the former two variables are shown to be significant factors on the R&D intensity for the low-tech sector.

• Korean Journal of Ichthyology
• /
• v.33 no.3
• /
• pp.167-176
• /
• 2021

This study was carried out to clarify the egg, larvae and juveniles development of Abbottina springeri. For the experiments, the matured adults were collected at the Seowon-cheon, Dangjin-si, Chungcheongnam-do, in Korea. The amount of spawning of female A. springeri was about 1,225~2,100 (1,662±437, n=10). The fertilized eggs were circular in shape and 1.05~1.13 (1.08±0.02, n=30) mm in diameter. The hatching time was required 72 hours to 80 hours after fertilization under water temperature of 22℃. The newly hatched larvae were 2.10~2.23 (2.16±0.04, n=10) mm in total length and had egg yolk in the abdomen but the mouth was not opened. At 5 days after hatching, the preflexion larvae were 3.19~3.30 (3.24±0.03, n=10) mm in total length and the most of yolk-sac was absorbed. At the 15 days after hatching, the flexion larvae were 4.97~5.30 (5.13±0.12, n=10) mm in total length and the tip of the caudal fin was began to bend upward. At the 25 days after hatching, the postflexion larvae were 8.97~9.60 (9.44±0.16, n=10) mm in total length and the tip of the caudal fin was bent at 45°. At the 35 days after hatching, the juvenile were 12.0~13.5 (12.7±0.53, n=10) mm in total length and all fin-rays (iii7 dorsal fin, iii6 anal fin, i7 ventral fins) were reached a constant number of each part.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.719-727
• /
• 2021

In the field of architecture, retractable devices capable of responding flexibly to the environment have been applied widely to large structures. Among these devices, the aesthetically pleasing retractable membrane is lightweight so that the membrane can be opened easily using only a traction device. On the other hand, because the towed membrane moves as it is connected to the main cable by a trolley, the number of trolleys needed increases in proportion to the roof's area. This study proposes an optimal model for an open-type trolley (OTT), which is used widely in these devices, using topology optimization. The analysis used the ANSYS program. A new model was proposed based on the results and reviewed through the feedback. Through this process, it was possible to develop a prototype with increased durability and reduced weight. For OTT, optimization was performed based on static analysis and the boundary conditions, so three prototypes were designed. A comparison of the proposed trolley with the conventional one under the same conditions revealed an up to 71.04% decrease in volume while the yield-strength reached 8.67 to 11.43%. In conclusion, the optimal trolley proposed was found to be reliable in terms of economy and stability.

• (The) Research of the performance art and culture
• /
• no.35
• /
• pp.287-338
• /
• 2017

Gojong' Birth Anniversary Memorial Banquet in the 1910s was forced to be performed differently from the performance style in Joseon Dynasty period that featured a harmonious majestic beauty of etiquette music. The banquet was separated into three different sessions of ceremony, luncheon and performance', which clearly revealed a distinctive pattern of etiquette music. The performance was accompanied by the dinner party or was lightly implemented as part of evening entertainment. With the use of the term entertainment, the performances belonging to this category fell into nothing but something to enjoy, amusement, fun and play. The contents of such performances were not closely woven into the fabric of the entire banquet but were individualized and scattered in a way of putting the performances in a state of flux in line with the circumstances. Therefore, it became increasingly hard to expect a high degree of completion and solid structure of performances. The items of performance included western music, popular vocal music, popular instrumental music, magic, and film, which were not played in traditional court banquet in the presence of Gojong rather than traditional music and dance performed in court. In other words, the court performance could not maintain its traditional heritage but was transformed into a mixture of popular performance and new forms of art. It was driven by the Japanese imperialism toward the atmosphere of entertainment in oblivion of tradition but not toward the external extension of court performances.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.1
• /
• pp.49-54
• /
• 2022

The copper plating process used to fabricate the submicron damascene pattern of Cu wiring for Si wafer was applied to the plating of a PCB pattern of several tens of microns in size using the same organic additives and current density conditions. In this case, the non-uniformity of the plating thickness inside the pattern was observed. In order to quantitatively analyze the cause, a numerical calculation considering the solution flow and electric field was carried out. The calculation confirmed that the depletion of Cu²⁺ ions in the solution occurred relatively earlier at the bottom corner than the upper part of the pattern due to the plating of the sidewall and the bottom at the corner of the pattern bottom. The diffusion coefficient of Cu²⁺ ions is 2.65 10^-10 m²/s, which means that Cu²⁺ ions move at 16.3 ㎛ per second on average. In the cases of small damascene patterns, the velocity of Cu²⁺ ions is high enough to supply sufficient ions to the inside of the patterns, while sufficient time is required to replenish the exhausted copper ions in the case of a PCB pattern having a size of several tens of microns. Therefore, it is found that the thickness uniformity can be improved by reducing the current density to supply sufficient copper ions to the target area.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1082-1087
• /
• 2021

The propeller shaft has different pattern of behaviors at each static, dynamic, and transient condition to a ship shaft system due to the effects of propeller weight and eccentric thrust, which increases the potential risk of bearing failure by causing local load variations. To prevent this, the various research of the shafting system has been conducted with the emphasis on optimizing the relative slope and oil film retention between propeller shaft and stern tube bearing at quasi-static condition, mainly with respect to the Rules for the Classification of Steel Ships. However, to guarantee a stability of the shafting system, it is necessary to consider the dynamic condition including the transient state due to the sudden change in the stern wakefield during rudder turn. In this context, this study cross-validated the ef ect of propeller shaft behavior on the stern tube bearing during port turn operation, which is a typical transient condition, by using the strain gauge method and displacement sensor for 50,000 DWT medium class tanker. And it was confirmed that the propeller eccentric thrust change showing relief the load of the stern tube bearing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.234-234
• /
• 2022

도로에서의 우수를 원활하게 처리하기 위해서 빗물받이 및 연결관 등의 노면 배수시설이 설치되고 있으며, 노면 배수는 측구부를 통해 흘러 빗물받이 유입부로 차집되고 연결관을 통해 하수관거로 배수된다. 그러나 최근 국내 기상패턴의 변화로 국지성 집중호우와 같이 시간당 강우량 증가로 도로부와 저지대에서 배수시설의 배수불량에 따른 도심지 내수침수 피해가 발생하고 있다. 이에 정부에서는 다양한 우수관거 개선사업, 빗물펌프장, 지하저류조와 같은 방재시설을 설치하고 있으나 우수유출저감시설은 대규모 예산이 소요되고 실제 침수지역에 피해 저감효과에 대한 효용성 문제에 대한 제기뿐만 아니라 과밀화된 도심지에서는 지하공간 활용에 한계가 있는 실정이므로 도심지의 다양한 공간을 활용한 도시 배수 및 저류시설에 대한 연구가 필요하다. 따라서 본 연구에서는 유휴 공간인 도로 측구부 공간을 활용하여 도로 노면수를 저류 및 지체할 수 있는 노면수 측구 저류시설의 개념을 제시하고 측구저류조의 활용성을 판단하기 위하여 빗물받이 유입구, 빗물받이, 측구 저류조 및 빗물받이와 측구저류조 연결부에서의 노면수 유입, 유출 및 저류 등의 다양한 흐름 변화를 확인하기 위하여 Fluent 모형의 적용성을 분석하였다. 수치모의 전체 형상은 50x50cm 크기의 빗물받이를 기준으로 양쪽에 2m 길이의 측구 저류조를 원형관으로 연결하여 1/5 축소모형으로 구성하고 격자는 빗물받이 유입부, 빗물받이 및 측구 저류조 내부의 복잡한 3차원 흐름을 모의하기 위해 사면체와 육면체로 조밀하게 생성하였다. 다상유동해석을 위해 VOF(Volume of Fluid)방법을 적용하였고, 수치해석 방법으로는 비정상류, 난류 모형으로는 SST k-ω모형을 적용하였다. 수치모의 조건으로는 설계빈도별(5~30년) 우수유출량을 산정하여 유입 유량별 기존 빗물받이 유입부에서의 유입흐름, 빗물받이 내부에서의 와 발생흐름, 측구 저류조 및 연결관에서의 흐름을 구현하여 분석하였다. 수치모의 결과 빗물받이 유입부에서 연결관을 통한 측구 저류조로 유입되는 유입흐름과 빗물받이 하단부의 배수관을 통해 유출되는 흐름을 정상적으로 구현하였으며, 빗물받이 유입부 및 측구 저류조 연결관에서의 유속변화도 확인할 수 있었다. 또한 빗물받이와 측구 저류조에서 다양한 흐름을 구현하기 위한 Flunet 모형의 적용성을 검토하였으며, 향후 수리실험을 통하여 실제 흐름과의 매개변수 최적화 및 다양한 도로 조건의 변화를 고려한 수치모의 분석을 통하여 지속적인 모형의 검증이 가능할 것으로 판단된다.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.81-81
• /
• 2020

본 연구는 새싹인삼(Panax ginseng sprout) 재배용으로 이용하기 위한 묘삼(종삼)의 장기 저온저장 시 사용되는 필름의 종류가 묘삼의 출아율이나 생육에 영향을 미치는 지 조사하기 위해 수행되었다. 포장에 사용된 필름은 다공성물질인 제올라이트와 페그마타이트가 5% 함유된 50㎛ low density polyethylene(기능성 LDPE) 필름과 nylon/polyethylene 80 ㎛(Ny/PE) 필름에 묘삼을 100g씩 포장한 후 골판지 상자에 담아 -2℃의 저장고에서 10개월 동안 저장하면서 8개월째부터 2개월마다 시료를 꺼내어 5℃에서 5일 동안 온도 순화를 시킨 후 1차 조사에서는 육안조사로 실험실에서 건전한 묘삼과 부패 묘삼을 조사하였고, 건전한 묘삼만 새싹인삼 수경재배 농가에 재식한 후 2차 조사로 묘삼의 출아율과 출아된 묘삼이 새싹인삼으로 건전하게 생육한 비율을 조사하였다. 조사결과 Ny/PE 필름에 8개월 저장된 묘삼의 경우 1차 육안검사 시 뇌두부위가 검게 변하여 묘삼이 대부분 고사된 것으로 조사되었다. 필름 개봉 전 필름 내부의 O₂ 및 CO₂ 가스농도를 측정한 결과 O₂ 농도는 1.91%, CO₂ 농도는 38.9%로 측정되었고, 필름 개봉 시 알코올 냄새의 이취가 나는 것으로 보아 Ny/PE 필름으로 포장 된 묘삼이 -2℃의 저온저장기간 동안에도 호흡을 하면서 필름 내 산소를 완전히 소모하고 혐기적인 환경으로 변화시켜 대사활동이 불가능하였기 때문에 뇌두의 싹이 고사된 것으로 조사되었다. 반면 기능성 필름으로 포장한 묘삼은 저장 8개월에 정식 후 74.3%의 출아율을 보였고, 건전한 새싹인삼의 비율은 67.2%로 조사되었다. 정식 전·후 묘삼의 개체수 대비 건전 출아율의 비율은 56.7%를 나타내어 Ny/PE 필름으로 포장한 묘삼의 결과와 큰 차이를 보였다. 기능성필름의 개봉 전 필름 내부의 O₂ 및 CO₂ 가스농도를 측정한 결과 O₂ 농도는 12.9%, CO₂ 농도는 4.6%로 측정되어 묘삼의 저온저장 시 필름을 적용할 경우 공기의 유동이 원활이 이루어져 내부 O₂ 농도를 일정 수준 이상 유지해주는 필름을 사용하는 것이 묘삼의 출아와 생육에 좋은 것으로 조사되었다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.9
• /
• pp.1071-1080
• /
• 2017

This study examined the adhesiveness of beneficial intestinal bacteria to whole-grains using confocal scanning laser microscopy (CLSM), to demonstrate the prebiotic effects of whole-grains, and to develop prebiotic puffed snacks with these whole-grains. CLSM has been used to observe the adhesiveness of Lactobacillus acidophilus, which belongs to beneficial intestinal bacteria, to whole-grain powders using optical sectioning techniques. The enhanced effects on the growth of beneficial intestinal bacteria with the hot water grain extract were verified using an indirect count method. Finally, a puffed snack was produced with the prebiotic effect and the quality was evaluated by checking the chromaticity and degree of hardness. As a result, L. acidophilus exhibited adhesive ability to whole-grain powders and growth of selected beneficial intestinal bacteria were improved significantly. The Hunter L value of the developed puffed snack increased when seasoning was added. The hardness of the puffed snack with seasoning was higher than that of the control. The results of a sensory evaluation showed that the puffed snack with seasoning was highly rated in the overall preference compared to the control.