• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.226-227
• /
• 2007

유도결합 플라즈마(ICP)에서 안테나의 특정부분에 유도자기장을 보강 또는 상쇄 시키는 형태의 두 안테나를 고안하였다. 플라즈마 밀도와 전자온도, 플라즈마 전위, 전자에너지 분포함수 등의 플라즈마 파라미터들로 그 특성을 비교하였다.

• Journal of the Korean Chemical Society
• /
• v.37 no.8
• /
• pp.735-743
• /
• 1993

The electrocatalytic reduction of oxygen is investigated by cyclic voltammetry and chronoamperometry at glassy carbon electrode and carbon microelectrode coated with a variety of cobalt phenylprophyrins in various pH solutions. Oxygen reduction catalyzed by the monomeric porphyrin Co(Ⅱ)-TPP mainly occurs through the 2e$^-$ reduction pathway resulting in the formation of hydrogen peroxide whereas electrocatalytic process carried out 4e$^-$ reduction pathway of oxygen to H$_2$O at the electrodes coated with cofacial bis-cobalt phenylporphyrins in acidic solution. The electrocatalytic reduction of oxygen is irreversible and diffusion controlled. The reduction potentials of oxygen in various pH solutions have a straight line from pH 4 to pH 13, but level off in strong acidic solution. The reduction potentials of oxygen shift to positive potential more 400 mV at the electrode coated with monomer Co-TPP compound than bare glassy carbon electrode while 750 mV at the electrode coated with dimer Co-TPP compound.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2643-2648
• /
• 2015

This paper analyzes the phenomenon of drain induced barrier lowering(DIBL) for doping profiles in channel of asymmetric double gate(DG) MOSFET. The DIBL, the important short channel effect, is described as lowering of source barrier height by drain voltage. The analytical potential distribution is derived from Poisson's equation to analyze the DIBL, and the DIBL is observed according to the change of doping profile to influence on potential distribution. As a results, the DIBL is significantly influenced by projected range and standard projected deviation, the variables of channel doping profiles. The change of DIBL shows greatly in the range of high doping concentration such as $10^{18}/cm^3$. The DIBL increases with decrease of channel length and increase of channel thickness, and with increase of bottom gate voltage and top/bottom gate oxide film thickness.

• Journal of the Korean Chemical Society
• /
• v.42 no.5
• /
• pp.531-538
• /
• 1998

The ion selective membrane electrode made of calix[4]arene-based host 1 as ionophore, poly (vinyl chloride) (PVC) as matrix and dioctylsebacate (DOS) as a plasticizer was studied. The potential responses of this membrane electrode to alkali, alkaline earth and transition metal cations were investigated. Especially this membrane electrode was turned out to be affinitive for $Pb^{2+}$ in the deionized water. It was observed that the response was linear in the concentration range from $1.0 \times 10^{-1} M to 1.0 \times 10^{-6} M of Pb^{2+}$ and its slope (26.5 mV/decade) was near to the sub-Nernstian response in deionized water. Also, the potential was maintained constantly in the range of pH $4.00 \sim 12.00$, which supports the potential usage as $Pb^{2+}$ affinitive electrode in the deionized water.

• Journal of Life Science
• /
• v.8 no.6
• /
• pp.638-647
• /
• 1998

Protein Kinase C (PKC) activators, phorbol 12-myristate 13-acetate (PMA), bryostatin, and dioctanoyl glycerol (DiC8), induce translocation of PKC isozymes from cytoplasm to plasma membrane or into nucleus. The activated PKC negatively modulates growth of human breast cancer cells. Antiproliferative effect and translocation of PKC were investigated in MCF-7 cells. The translocation of activated PKC isozymes by PMA, bryostatin and DiC8 was occurred at the various different regions in MCF-7 cell. PKC $\alpha$ and $\beta$ could be translocated to the nucleus or the nuclear mem-brane, and PKC $\delta$and $\varepsilon$ to cell membrane by PMA while DiC8 and bryostatin induced the translocation of PKC $\alpha$ and $\beta$ to the nucleus or plasma membrane, respectively. In the antiproliferative effect of PKC activators, PMA ($IC_{50}$/ values of 1.2$\pm$0.3nM) and DiC8 ($IC_{50}$/ values of 5.0$\pm$1.1$\mu$M) inhibited the cell growth. Bryostatin also inhibited the cell growth but to a much less degree than one obser-ved with PMA : 16% growth reduction by 100nM bryostatin. However, PMA treated with bryostatin induced gro-wth inhibition, but PMA with DiC8 at 10$\mu$M was not effective. These results suggest that each PKC isozyme is tran-slocated to various specific sites, and that especially, PKC $\alpha$ isozyme plays an important role in control of antiprolife-raive function of cell growth.

• Resources Recycling
• /
• v.12 no.2
• /
• pp.45-53
• /
• 2003

In 2001, Korea produced a total of 4.91 million metric tons of fly ash, approximately 63.3% of which was recycled. Almost all of the recycled fly ash are used in concrete mixtures and cement industry. Therefore, in order to develop a new usage to increase the utilization of the fly ash, conductive induction was used in this research rather than triboelectrostatic. By applying conductive induction, we could verify the possibility of obtaining high purity fly ash below 1%LOI and high carbon fly ash over 70%LOI from raw fly ash. In this test, the potential difference between the two electrodes was conducted by changing the range of 8 to 16 kV.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.10
• /
• pp.181-189
• /
• 2007

This paper presents a experimental evidence of the generation of the earth potential and communication line noise from the electric railway. There is a critical measurement err in case of measuring the electrical power induced noise voltage and degree of cable balance in the field of earth potential generated. As a results, it has been found that the conventional cable has more noise immunity than shielded cable near the railway where the earth current flows through the sheath layer.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.5
• /
• pp.116-124
• /
• 2006

No matter how the equally spaced grounding grid is designed there are many problem. The best-fitted design for unequally spaced grounding grid is a part that must be considered. This paper Suggest a new way of calculation for grounding grid space of ground conductor by an algebraic function control(The first-order function, Root function, Polynomial function etc.) and on the optimal spaced grounding conductor that make the under 2[%] between maximum potential and minimum potential.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.335
• /
• pp.37-52
• /
• 2004

접지설비는 다른 설비에 비해서 단지 부속설비처럼 안이하게 취급하는 경우가 많다. 그러나 접지설비는 전로의 이상전압을 억제하고 지락시의 고장전류를 안전하게 대지로 흘려 인체의 보호나 화재, 기기의 손상 등의 재해를 방지하는 것뿐만 아니라 제어기기를 안정하게 동작시키는 등의 역할을 위한 필수불가결한 설비이다. 특히 최근 전자기기의 급격한 증가에 따라 안정된 신호계를 확보하기 위한 접지설비가 다양화, 혼재화하고 있다. 접지를 하여야 할 설비에는 전력설비, 정보$\cdot$통신설비(신호, 제어, 유무선통신, 컴퓨터 등), 피뢰설비(피뢰침, 피뢰도선, 가공지선 등)를 비롯하여 정전기 제거설비, 유도장해 방지설비 등 여러 가지 설비가 있다. 접지는 기본적으로 대지에 전기적 단자를 접속하는 것으로 즉, 금속 등의 도전성 물체를 대지와 전기적으로 접속하여 도전성물체의 전위를 대지와 같은 전위 또는 전위차를 최소화시키는 것을 말한다. 금속체와 대지를 접속하는 단자의 역학을 하는 것이 접지전극(Grounding electrode)이라고 하며 보통은 지중에 매설되어 있는 도체가 사용된다. 접지전극과 접지를 하는 설비를 연결하는 도선을 접지도선 또는 접지선(Grounding conductor)이라고 한다. 따라서 접지설비를 설계하기 위해서는 접지의 목적, 기능, 종류를 정확하게 이해하여 접지시스템을 구축함과 동시에 적절한 접지개소, 접지선, 접지극을 선정하고 시공하여야 한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.146-153
• /
• 2009

Recently, the common grounding systems are adapted in most large structures. Since the ground resistance is insufficient to evaluate the performance of grounding systems, it is needed to measure grounding impedance. Even though the methods of measuring grounding impedance of large grounding systems are presented in IEEE standard 81.2, but they have not been described in detail. In this paper, we present the accurate method of measuring grounding impedance based on the revised fall-of-potential method and measurement errors due to earth mutual resistance and ac mutual coupling depending on locating test electrodes at remote earth were examined for the 15[m]$\times$15[m] grounding grid. As a result, the measurement error due to earth mutual resistance is decreased when the distance to auxiliary electrodes increased. To get rid of measurement errors due to mutual coupling, the potential lead should be installed at a right angle to the current lead. When the angle between the potential and the current leads is an acute angle or an obtuse angle, the mutual couple voltage is positive or negative, respectively. Generally, the measurement errors due to mutual coupling with an obtuse angle route are lower than those with an acute angle route.