• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.2
• /
• pp.142-150
• /
• 2004

A preliminary study of the behavior of ultrasonic guided wave mode in a pipe using a comb transducer for maintenance inspection of power plant facilities has been verified experimentally. The mode identification has been carried out in a pipe using the time-frequency analysis methods such as the wavelet transform(WT) and the short time Fourier transform (STFT), compared with theoretically calculated group velocity dispersion curves for longitudinal and flexural modes. The results are in good agreement with analytical predictions and show the effectiveness of using the time-frequency analysis method to identify the individual modes. It was found out that the longitudinal mode(0,1) is less affected by mode conversion compared with the other modes. Therefore, L(0,1) is selected as an optimal mode for the evaluation of the surface defect in a pipe.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.4
• /
• pp.410-417
• /
• 2012

Currently domestic thermal and nuclear power plants are comprised of many type's condenser and steam generator tubes to produce the electricity of good quality. There are some methods to inspect these tubes in the event that several defects were discovered in these facilities. Among many non-destructive methods, we used guided wave to inspect the soundness of tubes, because this method is very fast to detect the defect and very simple to install the equipment and also, can inspect up to the long range at a fixed point. Also, this method has a drawback that does not detect a very small size defect. So, we made an effort to overcome this drawback through the experimentation and signal analysis according to the size and shape of the defect through the manufacture of various artificial cracks capable to generate within the small size tube in the study and we anticipate that these detect limits can be overcome along with the development of the signal processing and manufacturing technology of the sensor for the inspection.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.3
• /
• pp.233-240
• /
• 2014

In this study, we investigated the dispersion characteristics of guided waves in thin films. Dispersion curves are essential for understanding not only the behavior of ultrasonic waves, but also the mechanical properties of thin films. Matrix techniques are presented for modeling ultrasonic waves in multilayered structures before being used to calculate the dispersion curves for Al-steel and Al-composite specimens. When compared with the dispersion curves obtained using the commercial program (Disperse), the dispersion curves generated from the transfer matrix method show its validity. These developed methods are used to obtain dispersion curves for Al thin films deposited on a Si substrate. The resulting dispersion curves enable observation of both dispersive and non-dispersive behavior for the guided waves, depending on the thickness of the thin films.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.126-131
• /
• 2010

The purpose of this study is to assess the condition of composites used in aircraft under varying temperature environment with ultrasound guided wave technique. Investigation of crucial influential factor on the composite health monitoring related to aircraft operational environments such as the number of thermal cycles and temperature deviation between ground level and flight altitude has been of a great concern for aircraft safety issue. In this study, ultrasonic guided wave health monitoring scheme is proposed to evaluate composite specimens damaged with the thermal fatigue simulating aircraft operational condition. Guided wave dispersion curves are used to select right modes which show a promising sensitivity to each different thermal fatigue damage level. The present approach can be also implemented as one of on-lines health monitoring tools for aircraft.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.95-102
• /
• 2005

There are many tube and pipeline in nuclear power plant under high temperature and high pressure. Erosion and corrosion defects were expected on these tube and pipe-line by environmental and mechanical factors. These erosion and corrosion defects ran be evaluated by ultrasonic technique. In these study, Scanning Laser Source(SLS) technique was applied to detect defect and construct image. This technique also makes detection possible on rough and curved surfaces such as tube and pipe-line by scanning. Conventional ultrasonic scanning technique requires immersion of specimen or water jet for transferring ultrasonic wave between transducer and specimen. However, this SLS technique does not need contacting and couplant to generate surface wave and to get flaw images. Therefore, this SLS technique has several advantages, for complicated production inspection, non-contact, remote from specimen, and high resolution. In this study, SLS images were obtained with various conditions of generation laser ultrasound and receiving in order to enhance detectability of flaws on the tube. Stress corrosion cracks were produced on tube and images of stress corrosion cracks were constructed by using SLS technique.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.6 no.2
• /
• pp.94-100
• /
• 2013

Musculoskeletal ultrasound has unique advantages that may be free from exposure to radiation, low price compared to MRI, outpatient procedure that can be easily accessible, and better accuracy combined with physical examination. Dynamic ultrasound performed with stress tests are known to be useful for detecting the hidden lesions in the tendons, ligaments, nerves. Ultrasound in the elbow can be used easily in the outpatient for evaluation of the joint surface and synovial space; diagnosis for tendon diseases such as lateral epicondylitis, medial epicondylitis and morbidity of peripheral nerves; guide for anterior-posterior bursal and intra-articular injections.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2003

Since the scale in pipes reduces the flow rate, a quantitative evaluation of the scale is essential for the proper maintenance of pipes. Guided waves were employed to estimate the amount of scale in water supplying pipes. Using variable angle wedge, several modes of guided waves wire generated and their propagation charcteristics along the pipes with stale were analyzed. It was experimentally observed that the amplitude of F(M,2) modes at $f{\times}d=1.5MHz\;mm$ decreased significantly with increasing amount of scale. The present study showed that F(M,2) modes were optima) to evaluate the scale in water supplying pipes.

• Journal of Welding and Joining
• /
• v.12 no.4
• /
• pp.1-10
• /
• 1994

이 글에서는 비파괴검사개론에 관하여 알아보았다. 1. 비파괴검사의 의의 1.1 비파괴검사의 역사 1.2 비파괴검사의 원리 1.3 비파괴검사의 목적과 역할 1.3.1 품질관리 1.3.2 생산원가의 절감 1.3.3 품질의 평가 1.3.4 점검 1.4 비파괴검사자의 역할 2. 비파괴검사자의 방법 2.1 방사선투과시험 2.1.1 직접촬영법 2.1.2 투시법 2.1.3 전자사진법 2.1.4 계기법 2.2 초음파탐상시험 2.2.1 음향검사와 초음파탐상 2.2.2 초음파의 성질과 종류 2.2.3 접촉매질 2.2.4 초음파 탐상 방법 2.2.5 초음파 탐촉자 2.3 자기탐상시험 2.3.1 자기탐상 원리 2.3.2 자기탐상 방법 1) 자장측정 탐상법 2) 자기기록 탐상법 3) 탐사 코일법 4) 자분탐상시험 2.3.3 자분탐상시험 2.4 침투탐상시험 2.4.1 침투탐상시험의 원리 2.4.2 침투탐상시험법의 기본 1) 침투탐상시험의 종류 2) 현상체의 종류 2.4.3 침투탐상시험의 장단점 2.5 전자유도시험 (와전류탐상법) 2.5.1 와전류의 발생과 탐지 2.5.2 와전류의 탐지 2.5.3 와전류 탐촉자 2.5.4 와전류 탐상시험의 적용과 장단점.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.5
• /
• pp.540-544
• /
• 2012

Like the phase array based ultrasonic system, complicated electronics has been used for real time signal processing in the magnetostrictive long-range ultrasonic testing(LRUT) system. This study shows that the software approach including the phase compensation, noise filtering and waveform transformation takes advantage rather than the previous hardware approach. Furthermore, it is possible for the software approach to be able more flexible and efficient realtime signal processing. These results will contribute to a cost-effective LRUT system and analysis of the inspection data.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.1
• /
• pp.34-40
• /
• 2012

In this study, effects of bonding agent, e.g. epoxy, on the behavior of fundamental guided wave modes propagated in FRP plate bonded on a concrete, are investigated. Global matrix model of multilayered FRP-epoxy-concrete system was constructed to obtain the velocity and attenuation dispersion curves of the fundamental A0 and S0 modes. Two variables, thickness and elastic modulus of epoxy layer, were considered in the dispersion analysis. It was found that both the thickness and the elastic modulus of epoxy layer greatly affect the phase velocity and attenuation of S0 mode while those are negligible for A0 mode. Based on the results, it was concluded that S0 mode is more effective than A0 mode for bonding condition assessment for FRP plate bonded concrete.