• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.04a
• /
• pp.93-99
• /
• 1999

조화진동하는 점진원에 의한 반무한 탄성체의 응답해석을 수행해 탄성체의 임의의 깊이에서의 응답을 나타내는 계산식을 유도했다 이결과는 최근 연구개발이 진행되고 있는 조화진원에 의한 정밀 지하구조탐사에 중요한 이론적 바탕이 된다. 먼저 실용상 중요한 수평가진에 의한 응답을 계산했다 표면에 큰 응답이 표면파의 형태로 발생하지만 수평진원의 에너지 방사형태는 지향성을 가지고 있어 진원아래의 원뿔형의 영역이 크게 여기된다는 사실을 밝혔다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2010.10a
• /
• pp.21-22
• /
• 2010

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.3
• /
• pp.53-62
• /
• 2002

Site soil condition affects significantly on the seismic response of a structure and is a critical factor for the performance based seismic design of a structure. In this paper, the effects of nonlinear soil properties on the elastic response spectra of a structure including the nonlinearity of a soil due to the earthquake excitation is investigated using one step finite element approach for the entire soil structure system and approximate linear iterative procedure to simulate the nonlinear soil behavior with the Ramberg-Osgood soil model. Studies were carried out for a linear SDOF system of a variable period with and without a pile group for the 1940 CI Centro earthquake recorded on ground rather than rock. The study results showed clearly that the effect of the nonlinear behavior of soft soil is very important on the elastic seismic response of a structure suggesting the necessity of the performance based seismic design.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2008

In seismic response analysis of building structures, the input ground accelerations have considerable effect on the nonlinear response characteristics of structures. The characteristics of soil and the locality of the site where those ground motions were recorded affect on the contents of earthquake waves. Therefore, it is difficult to select appropriate input ground motions for seismic response analysis. This study describes a generation of artificial earthquake wave compatible with seismic design spectrum, and also evaluates the seismic response values of multistory reinforced concrete structures by the simulated earthquake motions. The artificial earthquake wave are generated according to the previously recorded earthquake waves in past major earthquake events. The artificial wave have identical phase angles to the recorded earthquake wave, and their overall response spectra are compatible with seismic design spectrum with 5% critical viscous damping. The input ground motions applied to this study have identical elastic acceleration response spectra, but have different phase angles. The purpose of this study is to investigate their validity as input ground motion for nonlinear seismic response analysis. As expected, the response quantifies by simulated earthquake waves present better stable than those by real recording of ground motion. It was concluded that the artificial earthquake waves generated in this paper are applicable as input ground motions for a seismic response analysis of building structures. It was also found that strength of input ground motions for seismic analysis are suitable to be normalize as elastic acceleration spectra.

• Water for future
• /
• v.49 no.4
• /
• pp.64-74
• /
• 2016

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.473-484
• /
• 2006

The capacity spectrum method (CSM) can be used to simply estimate the maximum displacement response of the nonlinear structures. To evaluate seismic performance of multi-span bridges using the CSM, the representative response for structural system should be derived from the multi-degree-of-freedom (MDOF) responses by using the equivalent single-degree-of-freedom (ESDOF) method. The ESDOF method is used to calculate the capacity curve of the structural system from the pushover curves of all piers or structural members estimated by the pushover analysis. In order to evaluate an accuracy of ESDOF methods used in the CSM, the maximum displacements estimated by the CSM incorporating the several ESDOF methods are compared to those by the inelastic time-history analysis for several artificial earthquakes corresponding to the design spectrum.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.3
• /
• pp.63-71
• /
• 2002

The seismic design regulations have not been applied to the low-rised buildings which are less than 6 stories in Korea. For these buildings which are designed only for gravity loads, theoretical formulas which can estimate the seismic strength of building are derived. The column hinge sway and beam hinge sway mechanism are assumed for the formulars. For the comparisons with the formulas, the results of push-over analyses of 3 and 4 storied buildings are used. It can be shown that the estimating formulas correspond well with the push-over analyses. And the seismic strength of building has a little relations with the number of bay and becomes larger as the building becomes lower. Also, as the ratio and strength of reinforcing steel increase, the seismic strength of building is increased.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.57-57
• /
• 2011

지진해일은 진행속도가 빠르고 파장이 길며 파형의 변화 없이 먼 거리를 진행 할 수 있어 주변지역은 물론 멀리 떨어진 지역에도 심한 범람피해를 야기시킨다. 지진해일의 일반적인 특징으로 장파와 단파가 합성되어 있고 먼 거리를 전파할 경우 분산효과의 역할이 중요하게 된다. 특히 우리나라의 동해안에 영향을 주는 지진해일은 단주기파 성분이 강하고 파장에 비해 먼 거리를 전파하기에 분산을 고려하는 선형 Boussinesq 방정식을 지배방정식으로 사용하는 것이 바람직하다. 하지만 지금까지의 지진해일 전파모의를 위한 모형은 선형 Boussinesq 방정식의 복잡한 계산과 계산시간이 길다는 단점 때문에 선형 천수방정식을 지배방정식으로 사용하고 분산효과는 수치분산을 이용하여 고려해왔다. 지진해일 해석 시 일반적으로 사용되어 오던 기존의 leap-frog 유한차분 모형(Imamura et al., 1988; 조용식, 1996)은 지배방정식으로 선형 천수방정식을 사용하고 파의 분산효과는 수치분산을 이용하여 고려하므로 정해진 시간 간격에 대해 수심에 따라 격자 간격을 적절히 선택해야 하는데 수심이 복잡하게 변하는 경우 격자간격 조정이 불가능하여 분산효과를 정도 높게 고려할 수 없다. 이 문제점을 해결하기 위하여 윤성범 등(2004)은 파동방정식의 인위적인 분산항을 이용하여 Boussinesq 방정식의 분산효과를 고려할 수 있는 능동적인 분산보정기법을 제안하였고 Cho et al.(2007)는 일정한 수심에서 수치적인 분산오차가 Boussinesq 방정식의 물리적인 분산항을 대체하도록 수심, 격자 간격 및 계산 시간 간격 사이의 관계식을 유도하고 Boussinesq 방정식의 분산항과 일치하는 수치분산을 이용하여 실용적인 분산보정기법을 개발하였다. 이에 Ahn(2010)은 현재 컴퓨터의 계산 능력이 향상되어 선형 Boussinesq 방정식을 직접 차분하여 계산하는데 무리가 없다고 판단하여 선형 Boussinesq 방정식을 직접 차분한 모형을 개발하였다. 본 연구에서는 기존의 원해 지진해일 전파모의에 이용되어왔던 선형 천수방정식에 수치분산을 고려한 모형 대신 선형 Boussinesq 방정식의 유한차분 모형을 제안하였으며 기존의 선형 Boussinesq 방정식 모형의 격자와 수심간의 제약을 없애기 위해 차분 기법을 달리 한 2차 정확도의 유한차분 모형을 제안하였다. 검증을 위하여 선형 Boussinesq 방정식의 해석해(Carrier, 1991)와 비교하였다.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.269-272
• /
• 2008

The seismic fragility curves of a structure represents the probability of exceeding the prescribed structural damage given various levels of ground motion intensityand the seismic fragility curve is essential to evaluation of structural performance and assessment of risk and loss of structures. The purpose of this paper is to develop seismic fragility functions for bridge structures in Koreaby reviewing those of advanced countries. Therefore, at first, we investigated development conditions of the seismic fragility functions. And the next highway bridges in Korea are classified into a number of categories and several typical bridges are selected to estimate seismic fragilities for using this analysis method in Korea. Finally, fragility curves for PSC Box girder bridge are estimated. The results show that the bridge classification and damage state play an important role in estimation of seismic damage and seismic fragility analysis for bridge structures.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.4
• /
• pp.17-26
• /
• 2001

In order to estimate peak ground motions and frequency characteristics of strong ground motions in southern korea, we employed the stochastic simulation method with the moment magnitude(M$_{w}$) and the hypocentral distance(R). We estimated same input parameters that account for specific properties of source and propagation processes, and applied them to the stochastic simulation method. The stress drop($\Delta$$\sigma$) of 100-bar was estimated considering results of research in ENA, China, and southern korea. The attenuation parameter x was calculated by analyzing 57 seismograms recorded from September 1996 to October 1997 and the estimation result of the attenuation parameter x is 0.00112+0.000224 R where R is hypocenter distance. We estimated strong ground motion relations using the stochastic simulation method with suitable input parameters(e.g. $\Delta$$\sigma$, x, and so on). At last, we derived relations between hypocentral distances and ground motions(seismic attenuation equation) using results of the stochastic prediction.esults of the stochastic prediction.n.