• Journal of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.263-272
• /
• 1969

액체의 상태합을 유도하여 여러 가지 액체들의 적용하여 열역학적 성질들과 점성도를 계산하여여 측정치와의 좋은 일치를 보았다. 그리고 이 상태합을 써서 여러 성분으로 된 액체 용액의 상태합을 얻었으며 나아가서 액체 용액에서의 화학 반응 속도를 구할 수 있음을 보았다.

• Journal of Industrial Technology
• /
• v.20 no.B
• /
• pp.175-182
• /
• 2000

In this paper, a novel speed control strategy using an acceleration feedforward compensation by the estimation of the system inertia is proposed. With the proposed method, the enhanced speed control performance can be achieved and the speed response against the disturbance torque can be improved for the vector-controller induction motor drive systems in which the bandwidth of the speed controller cannot be made large enough. The experimental results confirm the validity of the proposed strategy.

• Proceedings of the KIEE Conference
• /
• 1983.07a
• /
• pp.79-82
• /
• 1983

상변환에 의한 농형유도전동기의 1/3, 2/3 속도제어 방법에 대하여 연구하였고, 종래의 국수변환 방법과 비교하였다. 1마력, 36슬롯을 모델로 하여 1800, 1200, 600rpm을 얻어 내었으며, 국수변환 방법에 비하여 고정자의 크기, 슬롯수, 동량을 줄일 수 있는 장점을 가지고 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1987.07a
• /
• pp.89-97
• /
• 1987

가로흐름에 방류되는 연직평면부력젤의 젤중심선경로와 온도분포를 실험자료와 기본방정식으로부터 유도된 적분식에 의하여 해석한다. 기본방정식으로부터 적분식의 유도는 상사법칙과 특성길이를 도입하여 연직상향 및 수평방향흐름영역에 대한 차원해석을 하였고, 실험은 속도비(R=Wo/Ua)와 방류밀도Froude수를 변화시키면서 각각에 따른 젤중심선경로와 온도분포를 획득하였다. 속도비 R과 방류밀도Froude수 Fo에 따라 부력젤의 흐름특성은 달라지게 되며, 초기조건(운동량및 부력)에관계없이 부력젤은 항상 운동량지배영역이 존재함을 알 수 있었고 적분식에 의한 역법칙(power law)과 실험 자료는 대체로 일치된결과를 나타내었다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.1 no.1
• /
• pp.21-31
• /
• 1989

본 연구에서는 경사진 hot-wire probe 의 특성값을 구하고 열선풍속계의 응답식으로부터 수평원통관내에서 3차원 흐름의 속도성분과 난류 강도 그리고 전단 응력을 pitot tube의 결과와 비교 연구하였다. 또한, 속도 및 난류 강도에 관한 유도된 식을 swirling flow에도 적용하여 만족한 결과를 얻었다.

• 전기의세계
• /
• v.46 no.2
• /
• pp.23-29
• /
• 1997

본 원고에서는 전동기 가변속 운전 기술을 구성하고 있는 전력 변환 기술, 속도 제어 방식 및 제어 알고리즘에 대한 각각의 변천 과정과 기술 전망을 직류전동기와 교류전동기에서는 유도 전동기를 중심으로 속도 제어기술의 변천 및 기본개념을 살펴보고자 한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.1
• /
• pp.20-26
• /
• 2005

Ultrasonic guided waves have been widely employed for long range inspection of structures such as plates, rods and pipes. There are numerous modes with different wave velocities, and the appropriate mode selection is one of key techniques in the application of guided waves. In the present work, phase tuning by an array transducer was applied to generate ultrasonic guided waves. For this purpose, 8-channel ultrasonic pulser/receiver and their controller which enables sequential activation of each channels with given time delay were developed. Eight transducers were fabricated in order to generate guided waves by using an array transducer. The selective tuning of wave mode can be achieved by changing the interval between elements of an array transducer.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.2
• /
• pp.157-165
• /
• 2002

This paper presents the implementation of the speed control system for 3 phase induction motor using PD controller and neural networks. The PD controller is used to control the motor and to train neural networks at the first time. And neural networks are widely used as controllers because of a nonlinear mapping capability, we used feedforward neural networks(FNN) in order to simply design the speed control system of the 3 phase induction motor. Neural networks are tuned online using the speed reference, actual speed measured from an encoder and control input current to motor. PD controller and neural networks are applied to the speed control system for 3 phase induction motor, are compared with PI controller through computer simulation and experiment respectively. The results are illustrated that the output of the PD controller is decreased and feedforward neural networks act main controller, and the proposed hybrid controllers show better performance than the PI controller in abrupt load variation and the precise control is possible because the steady state error can be minimized by training neural networks.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.299-306
• /
• 2003

The rotor flux position is needed to perform vector control of induction motor. But rotor speed information is needed to get accurate the rotor flux position. It is difficult to implement the open loop method without speed information or the motor equation only because of noise or the motor parameter error. This paper presents the speed estimator can use the arbitrary rotor flux observer by separating the flux observer and speed estimator and apply the three flux observers proposed by Ohtani, Lorenz and full order flux observer. The validity of speed estimator presented is verified and the performance using the three rotor flux observers is analyzed by the simulation and experiment.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.3
• /
• pp.12-18
• /
• 1970

In this paper, the radiation characteristics of a Circular Loop Antenna is studied in a moving homogeneous, isotropic and linear media with a constant velocity much less than the speed of light. In Stuffing the radiation characteristics, Srst vector potential on the loop antenna is derived in the moving media by appling Maxwell-Minkowaski's theory. Next, using the derived relations, the electric and magnetic Seld is calculated for the spec-i Sed wave length ana velocity of the media. The Seld patterns in the moving media are compared with those of stationary media. We find that the intensity of the field is reduced in the direction of the media velocity and increased in the opposite direction only for the component parallel with the plane of the antenna. The deviation from the stationary media is proportional to the velocity of the media and the frequency of source current.