• 한국유가공학회:학술대회논문집
• /
• 2006.06a
• /
• pp.29-45
• /
• 2006

최근에 들어 웰빙(well-being)과 함께 로하스(LOHAS: Lifestyle of Health and Sustainability)란 개념이 급속도로 확산되고 있으며, 이를 만족하는 식품으로 친환경 농산물과 유기 가공 식품이 대두되고 있다. 여러 마케팅 조사에서도 친환경 농산물과 유기 가공 식품의 소비자 선호도는 상당히 높게 나타난다. 이러한 다양한 소비자의 요구에 맞춰 우리의 2세에게 더욱 안전하고 좋은 품질의 이유식을 제공하고 나아가 한계에 이른 '지구와 환경을 해치지 않는 지속가능 한 소비'를 유도하고자 업체들은 유기농 이유식을 개발하고 있다. 유기농 소비자 10명 가운데 7명은 최근의 웰빙 붐 때문에 유기농에 관심을 가지게 됐으며, 가격이 다소 비싸더라도 가족의 건강을 위해 친환경 농산물을 구입하는 것으로 나타났으며, 국내외를 막론하고 친환경 농산물과 유피 가공 식품의 시장 동향을 살펴보면 지속적으로 증가하고 있으나, 아직까지 일반 제품에 비해 미미한 수준이며, 국내는 인증 제도가 없으나, 유기 가공 식품표시기준에 따라 표시되고 있다. 일반적으로 이유식이라 함은 식품공전에서 영 ${\cdot}$ 유아용 곡류 조제식만을 말하지만 넓게 축산물의 조제유류, 영아용 조제식, 성장기용 조제식, 기타 영 ${\cdot}$ 유아식을 포함할 수 있으며, 유기농 이유식 제조 현황을 살펴보면 동결, 분무, 드럼 등의 건조와 퍼핑이나 Extruder를 통한 알파화로 원료를 가공하여 은 살균, 멸균, 균질, 혼합, 건조, 냉각, 포장 등의 다양한 공정으로 이루어진 분무건조나 유동층이나 연속식 과립기를 사용하여 분말이나 입자형 이유식을 생산하며, 동결 건조를 하여 열수를 가해 죽 상태로 먹을 수 있도록 한 제품, 데워서 떠 먹일 수 있도록 병조림이나 레토르트 유동식 제품, 바로 마실 수 있는 쥬스류, 두유류, 과자 등으로 생산하고 있다. 주된 메이저4사는 일동후디스, 남양유업, 매일유업, 파스퇴르유업으로 다양한 제품들을 생산하고 있으며, 두유를 위주로 한 정식품, 연세우유와 종근당건강, 다양한 다국적 기업들의 제품이 수입되고 있는 실정이다. 이유식 시장도 96년 하반기부터 정체를 보이는 상태다. 2002년도 이유식 시장은 약 1,300억원 규모로 업체들의 고가 신제품과 유기농 이유식 출시로 판매 금액은 소폭 상승하였으나 판매 수량은 큰 변동이 없다. 저출산에 따른 양육비 집중과 유기농 제품에 대한 저변이 크게 확산돼 베이비 웰빙은 어느 정도 예견된 일이거니와 이미 미국 등 선진국에선 유아에 그치지 않고 아동까지 유기농과 고급 원료를 사용한 고가의 웰빙 제품이 봇물을 이루고 있는 상황이어서 유아식 시장은 어느 때보다 경쟁이 치열할 것이며, 국내 식품 업체들이 너도나도 유기농 제품과 매장사업에 뛰어들고 있다. 유기 가공 식품의 지속적인 발전을 위해서 (1) 국내산/수입산 공통으로 인증 제도가 도입되고 원료 농산물뿐만 아니라, 모든 공정이나 공장에 대한 종합적 관리와 동일한 인증 표시가 이루어져야 한다. (2) 정부 부처의 이기를 타파할 수 있는 법정부적 기구나 대책이 필요하다. (3) 유기 가공 식품을 취급하는 업계에서는 기존 3%의 비의도적 혼입치의 고려나 상한선 재설정을 요구하고 진정한 유기 가공 식품으로 공정 경쟁한다. (4) 활발한 인증심사원의 교육과 배출로 인증이나 심사기관의 민간 이양을 적극 장려하고 국가관 상호 신뢰를 구축한다. (5) 각 소비자 단체나 소비자는 환경을 살리고 생명체의 공생이라는 관점에서 최선의 길이 유기농 제품임을 인식하고 소비하여 우리의 다음 세대에게서 빌려온 소중한 환경을 물려준다.

• Analytical Science and Technology
• /
• v.13 no.6
• /
• pp.766-774
• /
• 2000

The major and trace constituents of Mongolian chromite were analyzed by ICP-AES. The dissolution procedures, mixed acid ($HClO_4+H_3PO_4$) digestion and fusion with $Na_2O_2$ flux, have been studied to dissolve the chromite. The optimum dissolution method was found to be a fusion with $Na_2O_2$ flux. The effect of large amount of Na on major and trace constituents was examined when these elements were determined by ICP-AES. There was no effect on major elements at a concentration of Na 250 mg/L solution. The emission intensity of trace constituents containing Na 1,250 mg/L decreased to 1.0-5.2% according to elements and wavelengths. The result of this method was compared with that of neutron activation analysis (NAA) to confirm the accuracy of this procedure. The results between two methods were in a good agreement within less than 5% for $Al_2O_3$, $Cr_2O_3$, MgO and -20 to 8% for Co, Mn, V, Zn, respectively.

• Korean Journal of Environmental Biology
• /
• v.29 no.1
• /
• pp.61-67
• /
• 2011

N-acetyl-L-cysteine (NAC) having a thiol, a precursor for glutathione (GSH), is known as one of the antioxidants. NAC used as a radioprotector against ionizing radiation (IR)-induced injury and damage. The aim of this study was to evaluate the radioprotective effects of NAC against IR-induced cell damage in Saccharomyces cerevisiae and the antioxidative effect of NAC on transcriptional level of yeast antioxidant enzyme genes such as superoxide dismutase (SOD) and catalase. In the present study, yeast cells were pretreated with various concentrations of NAC and/or irradiated with various doses of gamma rays. The cell viability was measured by counting the cell forming unit (CFU). The quantitative real-time PCR was performed for analysis of gene expression of SOD and catalase. The viability of irradiated cells was not improved by pretreatment with NAC. Ionizing radiation with 100 Gy highly induced the gene expression of antioxidant enzymes. In the irradiated group with NAC pretreatment, the gene expression of SOD and catalase was gradually reduced with the increased concentrations of NAC. These results indicate that NAC can act as a useful antioxidant to scavenge reactive oxygen species in vivo, but does not protect cells against IR-induced cell death in S. cerevisiae.

• Korean Journal of Clinical Laboratory Science
• /
• v.41 no.3
• /
• pp.111-122
• /
• 2009

Cadmium (Cd) is known to exert gonadotoxic and spermiotoxic effects. The present study was performed to investigate the morphological effects and metallothionein (MT) expression by zinc pretreatment in the course of time of cadmium-induced testicular injury in rat. Fifty male Spraque-Dawley rats weighing 160~180 g were divided into two groups : saline-pretreated cadmium group and zinc-pretreated cadmium group. Rats of two groups received subcutaneous injection of saline and 100 mg/kg $ZnSO_4$ at 0, 2, 5 and 8 hrs intervals respectively. Cadmium chloride (4.5 mg/kg $CdCl_2$) was administrated intraperitoneally at 2 hrs after zinc injection and rats were killed 0, 12, 24, 48 and 72 hrs later. Testicular tissue damages, interstitial (Leydig) cells status and MT expression were determined using hematoxylin-eosin stained sections and a computerized image analysis system on sections immunostained with a mouse anti-metallothionein respectively. Zinc pretreatment was significantly reduced testicular damages in five pathological categories after cadmium administation. The number of surviving interstitial cells was significantly higher in the zinc-pretreated group than in the saline-preatreated group at 48 and 72 hrs after cadmium administration. Non-damaged testis showed the positivity of MT staining in spermatogenic cells, Sertoli cells and endothelium of blood vessel, but not in the Leydig cells. The positivity of MT staining in saline-pretreated group was significantly reduced at 24 hrs after cadmium administration, whereas zinc-pretreated group showed strong MT positive staining similar to the 0 hr by 42 hrs after cadmium administration. In damaged testis, MT positive staining was also observed in the Leydig cells of both groups. These results suggest that a major preventive effect of zinc against cadmium-induced testicular toxicity may be due to its ability to reduce the cytotoxicity of cadmium in spermatogenic cells and Leydig cells by inhibiting the susceptibility of the testis to cadmium but not MT production by cadmium.

• Journal of Periodontal and Implant Science
• /
• v.36 no.3
• /
• pp.767-782
• /
• 2006

이 연구의 목적은 DNA microarray 분석법을 이용하여 건강한 사람치주인대섬유모세포, 건강한 사람치은섬유모세포, 복제노화된 사람치은섬유모세포, 염증성 사람치주인대 섬유모 세포의 유전자 발현 형태를 상호비교하고자 하였다. 환자의 동의하에 충치, 치주염이 없이 교정발치된 치아의 치주인대세포를 배양하여 건강한 치주인대섬유모세포로, 만성치주염으로 발거된 치아에서 채취하여 배양한 세포를 염증성 치주인대섬유모세포로 선정하였다. 구강에서 채취한 치은결체조직에서 배양한 사람치은섬유모세포를 일차 배양한 후 계대배양을 통해 복제 노화를 유도하였다. $-198^{\circ}C$의 액화질소에 저장되어 있던 2, 4, 8, 15, 16세대 세포를 실험에 이용하였다. 위의 모든 세포들은 60 mm 배양접시에서 세포들이 80-90%의 밀생이 될 때까지 5% $CO_2$, $37^{\circ}C$, 100% 습도의 배양기에서 2일 간격으로 10% FBS가 함유된 DMEM 세포 배양액을 교체하면서 세포를 배양하였다. Trizol Reagent (Invitrogen, USA)를 이용하여 제조회사의 지시에 따라 total RNA를 추출하였다. 18S RNA와 28S RNA를 확인한 후 DNA microarray 분석을 실시하였다. 4배수 이상의 변화양상을 비교시 상호 유전자 발현의 차이를 나타내었다. 건강한 사람치은섬유모세포(2세대)와 노화된 치은섬유모세포에서 가장 높은 발현변화를 나타낸 반면 DMC1 dosage suppressor of mck1 homolog, meiosis-specific homologous recombination,은 건강한 치은섬유모세포에서 가장 높게 나타났다. 염증성 치은인대섬유모세포와 건강한 치주인대 섬유모세포를 비교시, Regucalcin은 염증성 치주인대섬유모세포에서 가장 높게 나타났고, Vascular cell adhesion molecule 1도 두 번째로 높게 나타났다. 건강한 치주인대섬유모 세포와 건강한 치은섬유모세포를 비교시, IL-11과 periostin이 치주인대섬유모세포에서 높은 발현을 나타낸 반면, Prostaglandin D2 synthase 21kDa과 Thioredoxin interacting protein은 치은섬유모세포에서 높은 발현을 나타내었다. 염증성 치주인대섬유모세포와 노화된 치은섬유모세포(15세대 이상)를 비교시 149개의 유전자가 유사한 발현 수준을 나타내었다. 이 연구는 노화, 염증, 세포 형태에 따라서 유전자 수준에서 가장 높거나 높은 수준 변화를 보이는 유전자가 다를 수 있음을 나타낸다. 향후, 치주염 환자들에서, 노염, 염증, 세포 특이성에 관한 유전자 표시지를 이용하여 진단하거나 치료에 응용하기 위해서는 더 많은 연구가 필요하리라 사료된다.

• Journal of Radiation Protection and Research
• /
• v.35 no.1
• /
• pp.21-25
• /
• 2010

Burnup of spent fuel should be determined accurately for the safety control of spent fuel. Especially, it is necessary to measure the burnup profile along the nuclear fuel axis. In the present work, an ionization chamber was designed and fabricated to measure the gamma ray profile inside the guide tube of spent fuel. The ionization chamber was composed of three parts; induction part, gas-inlet part, and sensor part. The sensor part had two electrodes; cathode and anode. A guide electrode was considered in the ionization chamber design to make the ionization chamber to be inserted easily into the guide tube. Pure gas (argon and xenon) was inserted into the ionization chamber, and the leakage current and saturation curve were measured to determine the operation characteristics of the ionization chamber. The gamma ray radiation was also measured in relatively high dose environment. The gamma ray profile of the spent fuel will be measured with the ionization chamber.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.401-412
• /
• 2003

In this paper, a broadband phase shifter structure using a new switched network was proposed. A new reference network is composed of coupled lines and 45$^{\circ}$open and short stubs, which are shunted at the edge points of a main line, respectively, A delay network is composed of only a standard transmission line. It is possible to design a broadband 180$^{\circ}$phase shifter that phase dispersive characteristics by an impedance ratio R of coupled lines and greater phase dispersive characteristics by characteristic impedances Zm, Zs of a main line and stubs are used together. By considering a structure symmetry, the even and odd mode analysis was performed to obtain theoretical S-parameters of the proposed phase shifter. Also, through computer simulation on the basis of derived equations, design graphs were presented to optimally design a 180$^{\circ}$broadband phase shifter. Design graphs provide the values of characteristic impedances Zm, Zs, and I/O match and phase bandwidths. To verify electrical performances of the broadband phase shifter proposed in this paper, low different 180$^{\circ}$phase shifters, operated at the center frequency 3 GHz were designed and fabricated using design graphs, and were experimented. One of them was designed as a standard Schiffman structure to compare with electrical performances. Measured results of each phase shifter to satisfy simultaneously design conditions of I/O match （VSWR=1.15:1) and maximum phase deviation $({\varepsilon}_{{\Delta}{\phi}}＝{\pm}2^{\circ})$ were well in agreement with corresponding simulation results over impedance match and phase error bandwidths, and showed broadband characteristics.

• Korean journal of applied entomology
• /
• v.28 no.2
• /
• pp.61-68
• /
• 1989

To investigate the possibility of the BPH control by systematic application of insecticides, biological effects of buprofezin and isoprothiolane upon the BPH population was evaluated in the laboratory and pot. Both chemicals did not affect the developmental period of the nymphal stage with the applied dosages. When the buprofezin treated instar nymph was developed to the adult, adult's longevity was fairly reduced and such an effect of buprofezin was greater upon the younger instar nymphs. Residual effect of buprofezin was about 30 days in the pot. And it could suppress the BPH population when the younger instar nymphs were dominant age group in the population at the time of treatment. Isoprothiolane was also more effective for the suppression of the BPH population when the younger instar nymphs were dominant at the time of treatment. And it was expected that by buprofezin treatment in July the control effect of isoprothiolane against the BPH population could be maximized when it was treated to control the rice neck blast in late July or early August, because buprofezin could induce the biased population age distribution in which younger instar nymphs were main group at the time of isoprothiolane treatment.

• Journal of the Korean Magnetics Society
• /
• v.5 no.1
• /
• pp.42-47
• /
• 1995

FeN thin films for inductive recording heads were sputter deposited using RF diode sputtering mehtod from a pure iron target onto 7059 glass substrates, and their magnetic properties were measured. The magnetic properties were greatly affected by film thickness, gas pressure, sputter power and flow ratio of $N_{2}$ to Ar. Single layer FeN films with their thickness varied from $1,000\;{\AA}$ to $6,000\;{\AA}$ were doposited. 800 W sputter power, 3 mT gas pressure, $N_{2}$ to Ar flow ratio of 6.6 : 100 were the sputtering conditions. Up to 7 layers of FeN films having total thickness of $6,000\;{\AA}$ were deposited using $SiO_{2}$ of $30\;{\AA}$ thickness as intermediate layers and their coercivity and saturation magnetization were measured. The sputtering conditions were the same as those in the single layer films. Easy axis coercivity of the single layer FeN films gradually decreased as their thickness was increased, but for the films with their thicknesses above $3,000\;{\AA}$, the coercivity changed very little. As the number of the FeN layers were increased, the coercivity decreased We estimated the grain size of FeN films from the FWHM (Full Width at Half Maximum) of X-ray diffraction peaks. The grain size steadily decreased from about $200\;{\AA}$ to $120\;{\AA}$ as the number of layers were increased. Minimum hard axis coercivity of 0.4 Oe was obtained when the number of layers was four. Maximum relative permeability was 2,900 when the number of layers was three. The cut off frequeocy of the multilayer films were above 100 MHz.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.35-39
• /
• 2011

In this work, mesoporous carbons (CMK-3) were prepared by a conventional templating method using mesoporous silica (SBA-15) for using catalyst supports in polymer electrolyte membrane fuel cells (PEMFCs). The CMK-3 were chemically activated to obtain high surface area and small pore diameter with different potassium hydroxide (KOH) amounts, i.e., 0, 1, 3, and 4 g as an activating agent. And then Pt-Ru was deposited onto activated CMK-3 (K-CMK-3) by a chemical reduction method. The characteristics of Pt-Ru catalysts deposited onto K-CMK-3 were determined by surface area and pore size analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and inductive coupled plasma-mass spectrometry (ICP-MS). The electrochemical properties of Pt-Ru/K-CMK-3 catalysts were also analyzed by cyclic voltammetry (CV). From the results, the K3g-CMK-3 carbon supports activated with 3 g KOH showed the highest specific surface areas. In addition, the K3g-CMK-3 led to uniform dispersion of Pt-Ru onto K-CMK-3, resulted in the enhancement of elelctro-catalystic activity of Pt-Ru catalysts.