• Title/Summary/Keyword: 유달율

Search Result 39, Processing Time 0.025 seconds

A Study on Estimation of the Delivery Ratio by Flow Duration in a Small-Scale Test Bed for Managing TMDL in Nakdong River (낙동강수계 수질오염총량관리를 위한 시범소유역 유황별 유달율 산정방법 연구)

  • Shon, Tae-Seok;Park, Jae-Bum;Shin, Hyun-Suk
    • Journal of Korean Society on Water Environment
    • /
    • v.25 no.5
    • /
    • pp.792-802
    • /
    • 2009
  • The objective of this study is to construct the watershed management system with link of the non-point sources model and to estimate delivery ratio duration curves for various pollutants. For the total water pollution load management system, non-point source model should be performed with the study of the characteristic about non-point sources and loadings of non-point source and the allotment of pollutant in each area. In this study, daily flow rates and delivered pollutant loads of Nakdong river basin are simulated with modified TANK model and minimum variance unbiased estimator and SWAT model. Based on the simulation results, flow duration curves, load duration curves, and delivery ratio duration curves have been established. Then GIS analysis is performed to obtain several hydrological geomorphic characteristics such as watershed area, stream length, watershed slope and runoff curve number. As a result, the SWAT simulation results show good agreements in terms of discharge, BOD, TN, TP but for more exact simulation should be kept studying about variables and parameters which are needed for simulation. And as a result of the characteristic discharges, pollutants loading with the runoff and delivery ratios, non-point sources effects were higher than point sources effects in the small-scale test bed of Nakdong river basin.

Prediction of Downstream Water Quality following Dam Construction (댐 건설에 의한 하류 수질변화 예측)

  • Han, Kun-Yeun;Choi, Hyun-Gu;Na, Chang-Hwan;Kwon, Na-Young
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2010.05a
    • /
    • pp.943-946
    • /
    • 2010
  • 과거 시행된 수질오염물질의 농도규제 정책은 오염배출업소 증가로 인한 오염총량의 증가를 억제할 수 없어 수질개선에 한계가 나타났다. 이에 정부는 배출농도 규제방식의 수질관리로 4대강 상수원의 수질개선이 어려워 4대강 특별법 제정과 함께 목표수질기준 한도에서 유역의 오염물질 배출량을 총체적으로 관리하는 오염총량관리제도를 도입하였고, 현재 수질오염총량관리제도의 안정적 시행을 위해, 제 2단계 수질오염총량관리 대상물질 선정연구, 4대강 수계 수질오염총량관리 유황별 유달율 산정 방법 연구 등이 시행되고 있다. 이와 같은 오염총량관리를 위해서는 먼저 유역의 오염물질 발생현황과 배출 기작을 정량적으로 규명하고, 수질모델링을 실시하여 오염배출원별로 적정부하량을 할당하여야 한다. 이에 본 연구에서는 향후 활용도가 클 것으로 기대되는 QUALKO2 모형을 이용하여 TMDL시스템을 지원하고 낙동강의 수질을 예측 평가 하고자 한다. 대상유역으로는 영주 다목적댐이 위치하게 되는 내성천과 낙동강을 선정하였으며 모의 입력자료로는 최근 3년간의 평균수질을 비교대상인 현재 상태로 설정하고, 해당유역의 발생배출량에 따라 2014년, 2019년, 2024년의 저수지 모의를 통해 하천모의의 입력자료로 사용하였다. 수질모델 적용을 위해 내성천이 유입되는 지점에서 8km상류의 예천(환경부 측정망)지점에서부터 양산천 유입 후 3km 지점까지 범위를 설정하였으며 모델 구간은 "낙동강수계 오염총량관리 기본계획" 수립시 적용한 구간을 고려하여 구성하였다. 내성천 상류 영주댐 건설 지점에서부터 낙동강 본류로 합류되기 전의 구간과 낙동강 본류 구간을 구분하였으며, 수리학적 지형학적 특성을 고려하여 구간(reach)으로 구분하고 각 구간을 1km 간격의 요소(element)로 세분화하여 총 96여개의 구간과 482여개의 요소로 구성하였다. 영주댐이 건설되는 가정하에 낙동강 본류의 유량조건별, 영주댐의 방류량 조건에 따른 내성천과 낙동강 본류의 수질변화 양상 분석결과, 저수시 보다는 갈수시에 수질농도의 저감효과가 크게 나타났으며, 영주댐의 연평균방류보다는 최대방류시에 내성천과 낙동강 본류의 저감효과가 큰 것으로 분석되었다. 또한 영주댐 건설로 인한 flushing 효과와 낙동강 상류의 안동댐과의 연계시에 낙동강에서 저감효과가 가장 크게 나타났다.

  • PDF

Analysis of Water Quality Improvement Effect by Securing Water Quality Characteristics and Flow Rate in the Geumho River (금호강 수질특성 및 유량확보에 따른 수질개선 효과 분석)

  • Kwak, Insoo;Choi, Boram;Jeon, Hyeryn;Kim, Sunae;Bae, Jaehyeong;Kim, Shin;Kim, Jungmin
    • Journal of Environmental Impact Assessment
    • /
    • v.29 no.6
    • /
    • pp.414-429
    • /
    • 2020
  • For the management of rivers, the target water quality is set by establishing the total amount of water pollution and water environment basic plan. For Geumho river T-P has achieved the target water quality, but for BOD, COD, TOC the target water quality of the water environment basic plan has been exceed for the past five years. Therefore, the flow rate for satisfying the target water quality was simulated by analyzing the load, load density, and pollution contribution rate of the Geumho river using BOD, COD, TOC and by utilizing QUAL-MEV a one-dimensional water quality model. According to the analysis of the load, the BOD, COD and TOC all showed the highest levels at the Geumho C point at 9,832.2 kg/day 20,656.6 kg/day, and 15,545.1 kg/day. The load density was highest at 9.47 kg/day/㎢, 37.55 kg/day/㎢, 30.20 kg/day/㎢, and 17.19 kg/day/㎢, 39.14 kg/day/㎢ in Dalseocheon stream during the wet seasons and dry seasons. Pollution contribution rate was highest at about 25 percent for Palgeocheon stream during the wet season and about 50 percent for Dalseocheon stream during the dry season. In addition, the correlation analysis between organic materials showed in the main stream and tributaty of the Geumho river that COD-TOC was 0.8 or higherthan BOD-COD and BOD-TOC in both the wet seasons and dry seasons. And after surveying the total amount of water pollution and the target quality of the water environment basic plan at Geumho C, it was analyzed that an additional flow tate of 14 times and 22 times was needed as of April 2019 (3.46 ㎥/sec).

Evaluation of the Effect of Agricultural Activity on Stream Water Quality by Watershed Modeling (유역모형을 이용한 농업활동이 수질에 미치는 영향평가)

  • Jung, KwangWook;Jung, Inkyun;Kang, SooMan;Kwon, Jinwook
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.510-510
    • /
    • 2016
  • 농업 비점오염원의 영향을 분석하고 여러 가지 대안(관리정책)이 수계의 수질에 미치는 영향을 평가하기 위해서 유역모형의 적용이 필요하다. 이러한 유역모형에는 모형의 복합성, 계산시간 등에 따라 simple method, mid-range model, detail model로 나눌 수 있다. Simple methods는 요구되는 자료가 작으나 그 결과의 정확성은 떨어진다. 반면에 detail model는 정확한 결과를 획득할 수 있으나 그만큼 방대한 자료와 모니터링을 요구하며, 보정 및 검증에 많은 시간과 노력을 필요로 한다. 특히, 복잡한 유역특성 및 축산오염원을 포함한 복잡한 특성들을 고려해서 모델링하기 위해서는 detail model이 필요하며 본 연구에서는 HSPF모델을 이용해서 그 영향을 분석하고자 하였다. 따라서 본 연구에서는 농업에 미치는 영향을 평가하기 위해서 청미천 유역 및 덕천천 유역을 대상유역으로 선정하여 그 영향을 분석하였다. 농업에 미치는 영향을 평가하기 위해서 유역내 투입된 비료사용량을 통계청 자료를 활용하여 산정후 적용하였으며, 축산 부산물중 자원화되는 축산 액비 및 퇴비량을 산정하여 그 영향에 대해 분석하였다. 또한 기존에 광범위하게 활용되고 있는 수질오염총량관리제도에서 산정되는 배출부하량에 유달율을 고려하여 점오염으로 입력하였으며, 직접방류되는 하수처리장도 함게 고려하여 구축하였다. 청미천 유역의 청미천1 지점의 BOD, T-N, T-P에 대한 보정기간의 평균 관측값은 4.205mg/L, 3.844mg/L, 0.137mg/L이며 검정기간의 관측값은 2.741mg/L, 4.638mg/L, 0.144mg/L로 나타났다. BOD, T-N, T-P에 대한 보정기간의 NSE는 -0.58, -0.20, -0.33이며, 검정기간의 NSE는 -0.26, -1.35, -3.54로 분석되었다. BOD, T-N, T-P에 대한 보정기간의 RMSE는 2.65, 1.63, 0.12이며, 검정기간의 RMSE는 1.36, 1.64, 0.07로 나타났다. 덕천천 유역의 경우 국가관측망이 없어 동진강의 제일 말단 지점인 동진강3 지점의 BOD, T-N, T-P에 대한 보정기간 평균관측값은 2.891mg/L, 3.455mg/L, 0.096mg/L이며, 검정기간의 관측값은 2.293mg/L, 3.223mg/L, 0.104mg/L로 나타났다. BOD, T-N, T-P에 대한 보정기간의 NSE는 -0.20, -0.56, -0.49이며, 검정기간의 NSE는 0.24, -0.06, -0.19으로 분석되었다. BOD, T-N, T-P에 대한 보정기간의 RMSE는 1.53, 2.12, 0.05이며, 검정기간의 RMSE는 1.05, 0.98, 0.06으로 나타났다. 본 연구의 분석결과는 점오염원, 축산계비점오염, 토지계비점오염, 시비량, 배경부하로 구분하여 분석을 실시하였으며 분석결과 청미천 유역의 비점오염 기여율이 약 65%를 차지하고 있는 것으로 평가되었으며, 덕천천 말단에서는 약 37.7%의 비점오염물질이 하천수질에 영향을 미치는 것으로 나타났다. 또한, 기존 수질오염 총량관리제도에서 점오염의 감소에 의한 비점오염비중이 커지는 것으로 평가되었으며, 그 중 축산이 차지하는 비중이 상대적으로 높은 것으로 평가되고 있지만, 본 연구의 결과에서는 그보다 적은 수준이 수계에 영향을 미치는 것으로 분석되었다.

  • PDF

Estimation of Pollutant Load Delivery Ratio for Flow Duration Using L-Q Equation from the Oenam-cheon watershed in Juam Lake (유량-부하량관계식을 이용한 주암호 외남천 유역의 유황별 유달율 산정)

  • Choi, Dong-Ho;Jung, Jae-Woon;Lee, Kyoung-Sook;Choi, Yu-Jin;Yoon, Kwang-Sik;Cho, So-Hyun;Park, Ha-Na;Lim, Byung-Jin;Chang, Nam-Ik
    • Journal of Environmental Science International
    • /
    • v.21 no.1
    • /
    • pp.31-39
    • /
    • 2012
  • The objective of this study is to provide pollutant loads delivery ratio for flow duration in Oenam-cheon watershed, which is upstream watershed of Juam Lake. To calculate the delivery ratio by flow duration, rating curves and discharge-loads curves using measured data were established, then Flow Duration Curve(FDC) and pollutant loads delivery ratio curves were constructed. The results show that the delivery ratios for $BOD_5$ for abundant flow($Q_{95}$), ordinary flow($Q_{185}$), low flow($Q_{275}$), and drought flow($Q_{355}$) were 23.9, 12.7, 7.1, and 2.9%, respectively. The delivery ratios of same flow regime for T-N were 58.4, 31.2, 17.2 and 7.1%, respectively. While, the delivery ratios T-P were 17.3, 7.5, 3.4, and 1.1% respectively. In general, delivery ratio of high flow condition showed higher value due to the influence of nonpoint source pollution. Based on the study results, generalized equations were developed for delivery ratio and discharge per unit area, which could be used for ungaged watershed with similar pollution sources.

Water Quality Modeling of Juam Lake by Fuzzy Simulation Method (퍼지 Simulation 방법에 의한 주암호의 수질모델링)

  • Lee, Yong Woon;Hwang, Yun Ae;Lee, Sung Woo;Chung, Seon Yong;Choi, Jung Wook
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.22 no.3
    • /
    • pp.535-546
    • /
    • 2000
  • Juam lake is a major water resource for the industrial and agricultural activities as well as the resident life of Kwangju and Chonnam area. However, the water quality of the lake is getting worse due to a large quantity of pollutant inflowing to the lake. As a preliminary step in making the countermeasure to achieve the water quality goal of the lake. it is necessary to understand how the water quality of the lake will be in future. Several computer programs can be used to predict the water quality of lake. Each of these programs requires a number of input data such as hydrological and meteorological data. and the quantity of the pollutant inflowed. but some or most of the input data contain uncertainty. which eventually results in the uncertainty of prediction value (future level of water quality). Generally. the uncetainty stems from the lack of information available. the randomness of future situation. and the incomplete knowledge of expert. Thus. the purpose of this study is to present a method for representing the degree of the uncertainty contained in input data by applying fuzzy theory and incorporating it directly into the water quality modeling process. By using the method. the prediction on the future water quality level of Juam lake can be made that is more appropriate and realistic than the one made without taking uncertainty in account.

  • PDF

Characteristics of Non-point Pollutants Discharge in a Small Agricultural Watershed during Farming Season (영농기 농촌 소유역의 비점오염물질 유출 특성)

  • Kim, Jin-Ho;Lee, Jong-Sik;Ryu, Jong-Su;Lee, Kyung-Do;Jung, Goo-Bok;Kim, Won-Il;Lee, Jeong-Taek;Kwun, Soon-Kuk
    • Korean Journal of Environmental Agriculture
    • /
    • v.24 no.2
    • /
    • pp.77-82
    • /
    • 2005
  • This study was conducted to identify the characteristics of non-point pollutants discharge in a small agricultural watershed during farming season. for this purpose, the Neoungchon watershed in Goesangun was selected as a typical agricultural area. Runoff and water quality data in the stream, the domestic sewage and the precipitation of the watershed were analyzed periodically from June 1 to November 6 in 2004 and pollutant loads were estimated. As a result the mean concentrations of BOD, SS, TN and TP in the stream were 3.0, 76.7, 8.7, 0.16 mg/L in rainy season and 2.4, 10.0, 3.5, 0.11 mg/L in dry season respectively. Daily discharge of non-point pollutant occurred above of 95% in rainy period. Measured pollutant loads in the watershed were $26.63kg/km^2/day$ of T-N and $0.62kg/km^2/day$ of T-P, within the range of other research results. Effluent loads based on guideline of total pollutant to stream management of MOE (Ministry of Environment) were less than delivery loads since the guideline could not reflect the agricultural practices, geomorphic and meteorological characteristics in an agricultural watershed.

A Study on Estimate of Sediment Yield Using Tank Model in Oship River Mouth of East Coast (Tank 모형을 이용한 동해안 오십천 하구의 유사량 평가에 관한 연구)

  • Kang, Sank-Hyeok;Ok, Yong-Sik;Kim, Sang-Ryul;Ji, Jeong-Hwan
    • Korean Journal of Environmental Agriculture
    • /
    • v.30 no.3
    • /
    • pp.268-274
    • /
    • 2011
  • BACKGROUND: A large scale of sediment load delivered from watershed causes substantial waterway damages and water quality degradation. Controlling sediment loading requires the knowledge of the soil erosion and sedimentation. The various factors such as watershed size, slope, climate, land use may affect sediment delivery processes. Traditionally sediment delivery ratio prediction equations have been developed by relating watershed characteristics to measured sediment yield divided by predicted gross erosion. However, sediment prediction equations have been developed for only a few regions because of limited sediment data. Besides, little research has been done on the prediction of sediment delivery ratio for asia monsoon period in mountainous watershed. METHODS AND RESULTS: In this study Tank model was expanded and applied for estimating sediment yield to Oship River of east coast. The rainfall-runoff in 2006 was verified using the Tank model and we derived good result between observed and calculated discharge in 2009 at the same conditions. In relation to sediment yield, the sediment delivery rate of 2006 was very high than 2009 regardless of methods for estimating sediment load. It was thought to be affected by heavy rainfall due to the typhoon. CONCLUSION(s): For estimating sediment volume from watershed, long-term monitoring data on discharge and sediment is needed. This model will be able to apply to predict discharge and sediment yield simultaneously in ungauged area. This approach is more effective and less expensive method than the traditional method which needs a lot of data collection.

Development of Connection Model based on FE Analysis to Ensure Stability of Steel Storage Racks (적재설비 안정성 확보를 위한 FE 해석 기반의 연결부 모델 개발)

  • Heo, Gwanghee;Kim, Chunggil;Yu, Darly;Jeon, Jongsu;Lee, Chinok
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.38 no.2
    • /
    • pp.349-356
    • /
    • 2018
  • This paper attempts to develop a connection model based on FE analysis that can be applied to the evaluation of earthquake fragility of Steel Storage Racks lacking research in Korea. In order to accomplish this goal, shaking table tests, modal tests, and various member tests (8 case, push-over test) for structural members have been conducted to understand the behavior of steel storage racks. Based on the experimental results, detailed modeling of the joints was conducted using the NX-Nastran program in order to develop a connection model for Steel storage racks to be applied to the seismic vulnerability assessment. Especially, surface to surface contact element and spring element are applied to simulate the connection between the column member and the beam member connected by the simple latch method. Spring element model developed and applied ARX (Auto Regressive eXogenous) based mathematical model. The simulation results based on the FE model showed excellent reliability with a mutual error rate of less than 8% when compared with the member test results. As a result, it was confirmed that the FE model based connection model developed in the study can be applied to the analytical model for the seismic vulnerability assessment of Steel storage racks.