• KSBB Journal
• /
• v.20 no.1 s.90
• /
• pp.26-33
• /
• 2005

The effects of carbon sources for exopolysaccharide production during batch cultivation of an Enterobacter sp. isolated from the composter were investigated. The highest amount of exopolysaccharide was obtained when lactose was used as carbon source. Lactose in medium was converted into glucose and galactose. Glucose was metabolized fast and was completely consumed, but about $20\%$ of lactose was accumulated as galactose. On the other hand, enzyme activity was about $350\~450$ unit with the increase of lactose concentration. Thus, it was considered that the exopolysaccharide might be produced in the course of that lactose was hydrolyzed into glucose and galactose by $\beta-galactosidase$ with respect to that enzyme activity on lactose hydrolysis was accorded to the exopolysaccharide production. When glucose and galactose were added to lactose medium, respectively, it could be considered that glucose was as a repressor and galactose was as a inducer for $\beta-galactosidase$ synthesis even though the mechanisms were not elucidated. The increase of lactose concentration was almost ineffective to the specific growth rate $(0.133\~0.151\;hr^[-1})$ but showed the difference in the biomass content. The higher carbon source concentration, the more residual sugar remained. It was assumed that the optimum lactose concentration for exopolysaccharide production was $30\~70g/L.$ On the other hand, it was considered that the nitrogen acted as growth limiting nutrients to the cell growth. In the cases of 30 and 70 g/L of the fixed carbon concentrations, the increase of the nitrogen sources concentration caused a remarkable increase within the range of $0.059\~0.225\;hr^{-1}$ and $0.141\~0.237hr^{-1}$ of the specific growth rate, respectively, while there was no significant difference in biomass.

• The Korean Journal of Soil Zoology
• /
• v.7 no.1_2
• /
• pp.17-21
• /
• 2002

Food waste which had been mixed with night soil sludge and composted for 21 days (mixing ratio = food waste/paper mill sludge : 1, w/w) was supplied to the 5 g of Eisenia fetida popualtion at various temperatures (5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 31, 32, 33, 34, 35$^{\circ}C$). The biomass of earthworms one month after feeding at 20-32$^{\circ}C$ was about two times more than that of the introduced earthworms, increasing rate of which was much higher than them at the other tested temperatures . There were decreases at temperatures below 7$^{\circ}C$, and less increases at temperatures of 8-10$^{\circ}C$ in biomass. Earthworms could not survive at temperatures at 34$^{\circ}C$ and 35$^{\circ}C$. Feeding rates of earthworms were much higher at 20-32$^{\circ}C$ than them at the other tested temperatures, and there were no differences among them at temperatures of 20-32$^{\circ}C$. But at 3 months after feeding, the biomass and feeding rate of earthworms decreased severely even at 20$^{\circ}C$ and 30$^{\circ}C$, which was supposed to be due to the long term effect of salts, especially sodium chloride (NaCl) in the food wastes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.451-457
• /
• 2019

In this study, the characteristics of coffee grounds were reviewed by making them from solid fuel through heat-drying and oil-drying method. The differences in the higher calorific power by each dried sample were compared. And industrial analysis using the thermogravimetric analyzer was considered for applicability to organic waste and oily samples. Before and after drying, the surface of the specimen was observed with SEM equipment and the ingredients were measured through the EDS equipment. As a result, no other hazardous substances, such as heavy metals, were measured. Next, The differences between thermal decomposition and combustion reactions were considered through the TG and DTG curves. As a result, it is that the oil-dried coffee grounds is longer to burn than the heat-dried coffee grounds. Finally, the combustion gases emitted through the thermogravimetric analyzer were collected and the carbon monoxide and carbon dioxide performed qualitative and quantitative analysis using GC over time.

• Clean Technology
• /
• v.29 no.2
• /
• pp.102-108
• /
• 2023

This study applied a hydrothermal carbonization (HTC) method to carbonize sewage sludge in order to satisfy the criteria of the Waste Management Act for recycled products and to explore the possibility of recycling sludge into modification blocks. Cement was mixed with carbonized sludge generated at the optimal temperature and reaction time during HTC. After that, the compressive strengths of the modification blocks were measured by conducting both a performance and leaching test. The results of the leaching test showed that heavy metals were not detected, and the specific gravity and absorption rates were less than 1.7 and 10%, respectively, indicating that all species satisfied the criteria. The results of the compressive strength test showed that a mixing ratio of 5% and 7% with cement cured for 28 days satisfied the criteria of A, B, and C type blocks but a mixing ratio of 3% with cement did not satisfy the criteria of A type blocks after 28 days. However, after additional curing for 42 days, the mixing ratio of 3% also satisfied the A type block criteria. Therefore, the optimal mixing ratio of carbonized sludge and cement was considered to be between 3% and 5% and confirmed that the modified blocks could be utilized as aggregates.

• Clean Technology
• /
• v.29 no.4
• /
• pp.327-332
• /
• 2023

This study investigated synthesis gas production via steam reforming of biogas. Ni-Al₂O₃ and Ni-CeO₂ catalysts were synthesized using the co-precipitation method, with controlled precipitation agent injection rates. Catalytic performances were tested at various temperatures, with a gas composition ratio of CH₄:CO₂:H₂O = 1:0.67:3 and a gas hourly space velocity (GHSV) of 647,000 mL h^-1 gcat^-1. The rate of precipitation agent injection influenced the characteristics of the catalysts depending on the type of support used. As the temperature increased, both the CO₂ reforming of methane and the reverse water gas shift reactions occurred. The Ni-Al₂O₃ catalyst, synthesized with a single injection of the precipitation agent, exhibited the best catalytic activity under conditions with sufficient steam supply among the prepared catalysts, due to its high Ni dispersion.

• Journal of Animal Environmental Science
• /
• v.18 no.2
• /
• pp.111-122
• /
• 2012

Establishment of the LFQC (Liquid Fertilizer Quality Certification) system is very urgent issue for recycling livestock manure as renewable resources in Korea faced with environmental problem of manure application to land due to intensive livestock farming. In this study, we investigated relevant laws and regulations on livestock manure fertilizer, certifications of eco-friendly agricultural products, government policies on livestock manure management to establish reasonable direction of Korean LFQC (Liquid Fertilizer Quality Certification) system. As a result from this study, the liquid fertilizers in 'LFQC' system could be classified as three levels according to the usage patterns in field; 1st. Individual Farm Level (IFL), 2nd. Joint Farm Level (JFL), and 3rd. Commercial Level (CML). And finally, we found some characteristics in 'Main Level-Grading Factors' of liquid fertilizer such as fertilizing value, harmfulness, stability, uniformity, economic effect, storage potential, commercial value, functionality. Those items were considered to be the key factors for the establishment of 'LFQC' system. More research on 'Evaluation Standards' for concrete guideline and on the 'Main Level-Grading Factors' be needed to complete Korean LFQC system.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.91-104
• /
• 2005

In the past, the design education focused on the technique and skill to satisfy the production and consumption activities of a corporation based on beauty and practicality in the industrial age. Now, it's time to switchover to a life-quality enhancing education by harmonizing and meeting the public's physical and mental needs because design education is a character education which enhances the quality of life by uplifting people's aesthetic sense. This paper has emphasized on the importance of public education of design through the theoretical investigation on social environmental changes caused by the emergence of information society,,education problems, public education, and the necessity of design education. The reason why this study should be done has been suggested by investigating the necessity of this research and bringing up the issue. Furthermore, the current status and problems of public education on design have been analyzed. Then, based on the result, the development direction of design education has been suggested. This study can be concluded as follows: First, the design education should change from its vertical structure to a horizontal one. It should be widely spread to the public, getting off from its privatization for a certain group. Second, designers and the public should correct their way of thinking about design. The ordinary people as well as the designers should cultivate their capability to find and take care of design related issues in their everyday lives. Third, all people should be the subject of design education for the public. As a part of cultural education on the public's aesthetic sense, design education should be reborn as a field of study in which a sound public culture can be developed by the integration of human life and culture, exceeding the limit of school curriculum.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.1 no.1
• /
• pp.69-84
• /
• 1993

In order to determine the optimum operational paramsters in cow manure composting, 4 laboratory scale composters were established. The cow manure was mixed with certain amount of saw dust to adjust the initial C/N ratio to 24, initial pH to 6.9 and composting was performed with varying operational conditions. It was found that the optimum aeration rate was 1000 ml/min kg. VS, the optimum moisture content 50% and no significant difference was found with different initial pH condition. Microorganisms were counted under the optimum conditions determined in this study. At the end of the experimental period, the number of bacteria, actinomycetes and fungi was $1.5{\times}10^9$ cells, $1.1{\times}10^8$ cells and $3.0{\times}10^8$ cells/g dry compost, respectively. At day 0, the number of coliforms, fecal coliforms and fecal streptococci was $3.1{\times}10^3$ cells, $7.5{\times}10^2$ cells and $5.6{\times}103$ cells/g dry composting material, respectively. Their population was decreased with time lapse, However, their survival time was longer than those reported by other researchers. Microorganisms were identified at the end of the experiment. Genus Bacillus was the most dominant comprising 89.3% of the total population. Among the Genus Bacillus, B. circulans compoex was the most abundant, followed by B. Stearothermophilus, B. Sphericus, B. licheniformis and B, brevis.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.110-123
• /
• 2008

The use of CCA as a wood preservative was recently inhibited due to its environmental pollution and human harmfulness. Instead of CCA, copper azole (CuAz) and alkaline copper quaternary (ACQ) have been used as alternative wood preservatives, but the price of the preservatives is much more expensive than that of CCA. As a substitute for high-priced CuAz and ACQ, environmentally friendly wood preservatives were formulated with okara, which is an organic waste from the production of tofu. Prior to formulating the preservatives, okara was hydrolyzed by three levels of sulfuric acid concentration (1, 2.5 and 5%) to easily penetrate the effective components of the preservatives into wood blocks. Final preservative solutions were formulated with the hydrolyzed okara and metal salts, such as copper sulfate, copper chloride and borax. The preservatives were treated into wood blocks by vacuum-pressure method to measure the treatability of the preservatives, and the treated wood blocks were placed in hot water for three days to measure the leachability of the preservatives. The effective components of the preservatives might be successfully penetrated into wood blocks through the uses of hydrolyzed okara and ammonia water. However, the leached amount of effective components was increased as the concentration of acid used for the hydrolysis of okara increased. The treatability and leachability of the preservatives were not affected by hydrolysis temperature but negatively affected by the addition of borax. Based on the results above, the optimal conditions for formulating okara-based wood preservatives cost-effectively and environmentally might be 1% acid hydrolysis of okara and the use of $CuCl_2$ as a metal salt. In addition, the treatability and leachability of okara-based wood preservatives were superior or no differences comparing with those of CuAz. Therefore, it is concluded that okara-based wood preservatives might have a potential to be used as an environmentally friendly wood preservative.

• Journal of Life Science
• /
• v.31 no.7
• /
• pp.617-625
• /
• 2021

To enhance the applications of apple pomace, which is a by-product of apple, this study analyzed the nutritional components, ursolic acid content, and antioxidant activity of different solvent (distilled water, fermented alcohol, and methanol) extracts. The samples included hot air-dried and freeze-dried apple pomace. The moisture, protein, fat, ash, and total dietary fiber contents of hot air-dried apple pomace were 3.2%, 3.9%, 2.4%, 2.0%, and 28.5%, respectively, and those of freeze-dried apple pomace were 8.2%, 3.4%, 2.4%, 1.8%, and 33.0%, respectively. Ursolic acid was not detected in the distilled water extract of either sample. However, in hot air-dried apple pomace, the methanol extract was 1,753.32 ㎍/ml, and the fermented alcohol extract was 1,532.94 ㎍/ml. In freeze-dried apple pomace, the methanol extract was 1,407.04 ㎍/ml, and the fermented alcohol extract was 1,221.81 ㎍/ml. The total polyphenol and flavonoid contents were 306.7 ㎍/ml and 950.1 ㎍/ml, respectively in methanol extracts of hot air-dried apple pomace and 277.6 ㎍/ml and 925.0 ㎍/ml, respectively in methanol extracts of freeze-dried apple pomace. 2, 2'-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activities of hot air-dried apple pomace were 73.3% in methanol extract and 59.4% in fermented alcohol extract, and those of freeze-dried apple pomace were 76.1% in methanol extract and 66.0% in fermented alcohol extract. Both samples had the lowest antioxidant activity in distilled water extracts. Similar to DPPH radical scavenging activity, both samples showed increasing 2,2'-azino-bis(3-ethylbenzothiazoline-6- sulfonic acid) (ABTS) radical scavenging activity in the order of methanol, fermented alcohol, and distilled water. All samples had stronger reducing power than ascorbic acid (311.5 ㎍/ ml) as a positive control.