• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.55-60
• /
• 2010

Purpose: The shrinkage of dental resin cement may cause several clinical problems such as distortion that may jeopardize the accurate fit to the prepared tooth and internal stress within the restorations. It is important to know the polymerization shrinkage-strain of dental resin cement to reduce clinical complications. The purpose of this study was to investigate the polymerization shrinkage-strain kinetics of six commercially available dental resin cements. Material and methods: Three self-cure resin cements (Fujicem, Superbond, M-bond) and three dual-cure resin cements (Maxcem, Panavia-F, Variolink II) were investigated. Time dependent polymerization shrinkage-strain kinetics of the materials were measured by the Bonded-disk method as a function of time at $23^{\circ}C$, with values particularly noted at 1, 5, 10, 30, 60, 120 min after mixing. Five recordings were taken for each materials. The data were analyzed with one-way ANOVA and Scheffe post hoc test at the significance level of 0.05. Results: Polymerization shrinkage-strain values were 3.72%, 4.19%, 4.13%, 2.44%, 7.57%, 2.90% for Fujicem, Maxcem, M bond, Panavia F, Superbond, Variolink II, respectively at 120 minutes after the start of mixing. Panavia F exhibited maximum polymerization shrinkage-strain values, but Superbond showed minimum polymerization shrinkage-strain values among the investigated materials (P < .05). There was no significant differences of shrinkage-strain value between Maxcem and M bond at 120 minutes after the start of mixing (P > .05). Most shrinkage of the resin cement materials investigated occurred in the first 30 minutes after the start of mixing. Conclusion: The onset of polymerization shrinkage of self-cure resin cements was slower than that of dual-cure resin cements after mixing, but the net shrinkage strain values of self-cure resin cements was higher than that of dual-cure resin cements at 120 minutes after mixing. Most shrinkage of the dental resin cements occurred in the first 30 minutes after mixing.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.1
• /
• pp.6-13
• /
• 2015

BACKGROUND: Most of the tailings have been left without any management in abandoned metalliferous mines and have become the main source of heavy metal contamination for agricultural soils and crops in the these areas. METHODS AND RESULTS: This experiment was carried out to investigate the assessment of the heavy metal contamination in paddy soils located on downstream of the closed metalliferous mine. The average total concentrations of cadmium (Cd), copper (Cu), lead (Pb), zinc (Zn), and arsenic (As) in paddy soils were 8.88, 56.7, 809, 754, and 37.9 mg/kg, respectively. Specially, the average concentrations of Cd, Pb and Zn were higher than those of warning criteria for soil contamination(4 mg/kg for Cd, 200 mg/kg for Pb, and 300 mg/kg for Zn) in agricultural soil established by Soil Environmental Conservation Act in Korea. The proportions of 0.1 M HCl extractable Cd, Cu, Pb, Zn, and As concentration to total concentration of these heavy metals in paddy soils were 27.7, 21.3, 35.1, 13.8 and 10.5%, respectively. The pollution index of these five metals in paddy soils ranged from 0.42 to 11.92. Also, the enrichment factor (EFc) of heavy metals in paddy soils were in the order as Cd>Pb>Zn>Cu>As, and the enrichment factor in paddy soil varied considerably among the sampling sites. The geoaccumulation index (Igeo) of heavy metals in soils were in the order as Cd>Pb>Zn>Cu>As, specially, the average geoaccumulation index of Cd, Pb, and Zn (Igeo 2.49~3.10) were relatively higher than that of other metals in paddy soils. CONCLUSION: Based on the pollution index, enrichment factor, and geoaccumulation index for heavy metal in paddy soils located on downstream of closed metalliferous mine, the main contaminants are mine waste materials and mine drainage including mine activity.

• Journal of the Korean Society of School Health
• /
• v.22 no.1
• /
• pp.1-16
• /
• 2009

Purposes: The objective of this study was to develop a management program for Korean elementary school students suffering from asthma, which would be based on the Australian Asthma-Friendly Schools (AFS) program. Methods: On the basis of the AFS program, we designed a 6-month pilot project for asthmatic students in two elementary schools in a rural area and one elementary school in an urban area of Korea. The pilot project consisted of the following processes: identifying students with asthma in a school, educating school staffs and the parents of an asthmatic child, registering those with asthma, and installing emergency kits for asthma attacks in school health rooms. In order to evaluate these processes, group discussions were held between project team members and school staffs in each area. In addition, we conducted a postal survey of 144 households having an asthmatic child. Results: The screening process adopted in this program resulted in the early diagnosis in asthma; however, it needs to be evaluated economically due to expensive diagnostic test for asthma. For the school nurses, asthma lessons were evaluated as being very helpful for their tasks, while teachers tended to take less interest in the program with only 45% of all teachers attending these lessons. Almost all participating parents reported that such lessons would be beneficial for the care of their child, even though only 24.2% of the survey respondents (122 households) attended the lessons. Installing emergency kits in school health rooms was regarded as a key feature of this project. The introduction of a register card containing more specific health records of asthmatic students was considered necessary to replace the existing list of students with asthma. Conclusion: This study has merit in that a Korean asthma-friendly schools program was developed for the first time, despite the many obstacles to such programs becoming more common.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.4
• /
• pp.186-194
• /
• 2013

We investigated the concentrations and distribution patterns of 17 polychlorinated dibenzo-p-dioxins/dibenzofurans(PCDD/Fs), 12 dioxin-like polychlorinated biphenyls(DL-PCBs) and 24 polybrominated diphenyl ethers(PBDEs) in sediments from Ulsan Bay in Korea. The concentrations of PCDD/Fs, DL-PCBs, and PBDEs in 33 sediment samples ranged from 0.11 to 4.86($1.81{\pm}1.04$) pg $WHO_{2005}$-TEQ $g^{-1}$ dry weight(dw), 0.06 to 44.2($4.02{\pm}7.99$) pg $WHO_{2005}$-TEQ $g^{-1}$ dw, and 2.81 to 63.8($19.4{\pm}13.9$) ng $g^{-1}$ dw, respectively. DL-PCBs had dominant contributions(mean, 88%) of total TEQ concentrations in sediment. The concentrations of target compounds in inner locations were higher than those in outer locations in Ulsan Bay (p<0.05). The dominant contribution of highly chlorinated DD/Fs in sediment was associated with combustion process from industrial complexes. Distribution pattern of DL-PCBs was similar with those of commercial PCB products. BDE209 was a dominant congener in sediment, suggesting high use amount of commercial deca-BDE product in surrounding areas.

• The Journal of the Petrological Society of Korea
• /
• v.15 no.3 s.45
• /
• pp.139-153
• /
• 2006

For the characteristics of rock material and standardization, flagstones of the trifurcated path in Jongmyo Royal Shrine, registered as World Cultural Heritage, were studied on the basis of petrographic, petrochemical and magnetic properties. The flagstones are composed mainly of pale gray fine to medium grained hornblende biotite granite, pale gray fine to medium grained biotite granite, pale pink medium to coarse grained biotite granite, pink medium to coarse grained biotite granite and minor pegmatite and schist. Flagstone represents the average size of $65cm{\times}4cm$ (standard deviation $12cm{\times}7cm$) and suitable (34.7%), common (41.4%) and unsuitable (23%) in roughness. It is interpreted that pale pink and pink granite, pegmatite, schist and other flagstones with unsuitable state are not original rock materials and were exchanged during restoration, in the past. The number of these non-original rock materials is about 560 flagstones. We suggests that the standard flagstone of the trifurcated path is pale gray fine to medium grained biotite granite (${\pm}$hornblende in trace), 70wt.% in $SiO_2$, content, and ${\pm}0.1{\times}10^{-3}\;SI$ in magnetic susceptibility.

• The Korean Journal of Mycology
• /
• v.47 no.2
• /
• pp.131-142
• /
• 2019

The Bupjusa and Seonamsa temples are located at places with geographically different condition, and therefore, differ with respect to building's structure and layout. In addition, evident difference can be appeared by the regional climate. For the 2 years, we studied the concentration and diversity of the seasonal airborne fungi inside and outside of the 2 temples. In Seonamsa temple, airborne fungi concentration in the indoor and outdoor air was higher and the species diversity in the indoor air was lower, whereas, concentration variation was larger than that of Bupjusa temple. A total of 173 fungal isolates (including 54 genera) and 162 isolated (including 49 genera) were obtained from the indoor air of Bupjusa and Seonamsa temple, respectively. Whereas, 80 fungal isolates (including 33 genera) and 74 isolates (including 39 genera) were collected form the outdoor air of Bupjusa and Seonamsa temple, respectively. However, more fungal varieties were observed to be distributed inside Bupjusa and outside Seonamsa temples. Amongst all the fungi identified, ascomycetes were more dominant (plus or minus 90% points), followed by basidiomycetes and zygomycetes; which more presented in outdoor air than in indoor air. The airborne fungi concentration in spring (month of April) and autumn was higher than in any other season, for Seonamsa and Bupjusa temples, repectively. Genus Cladosporium was isolated from each site and season, with its dramatic increase noted in autumn. In addition, the highest basidiospore(s) number was obtained after the rain. Consequently, the results suggest that Seonamsa temple was more susceptible to biological damage than Bupjusa temple was.

• Korean Journal of Poultry Science
• /
• v.48 no.3
• /
• pp.151-160
• /
• 2021

This study was conducted to determine the concentrations of particulate matter (PM) and NH3 emissions from different types of laying hens poultry houses during spring. The concentrations of PM and NH3 were measured three times (2-week intervals; March to May) in Floor-pen-, Aviary-, and Cage-type poultry houses. Overall, PM₁₀ and PM_2.5 concentrations were found to be low from 22:00 to 04:00. The PM₁₀ and PM_2.5 concentrations in Floor-pen and Cage houses were similar with no significant daily deviation. NH₃ concentrations measured over 24 h at the center and end of Floor-pen house were relatively constant. Irrespective of measurement location, NH₃ concentrations were the lowest in Floor-pen house. Moreover, NH₃ concentrations were higher at the end of Floor-pen and Aviary houses than that at the center; however, lower concentrations of NH₃ were detected at the end of Cage house. The concentrations of PM₁₀ and PM_2.5 around the poultry houses were 57.5 and 34.0 ㎍/m³, respectively, with the daily average PM₁₀ and PM_2.5 concentrations (4,730 and 447.7 ㎍/m³, respective) being the highest in Aviary house. The concentrations of NH₃ at the center and end of Cage house were the highest at 12.0 and 9.31 ppm, respectively. Furthermore, in Cage house, the emission factor of NH₃ was the lowest, whereas there was no significant difference on that of NH₃. In conclusion, among the three types of poultry houses assessed, PM (PM₁₀, PM_2.5) concentrations were higher in Aviary house, whereas NH3 concentrations were higher in Cage house.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.25-33
• /
• 2021

Purpose : The purpose of this study is to evaluate the accuracy and usefulness of the Trigger mode for the Respiratory Gated Radiation Therapy (RGRT) Materials and methods : A QUASAR respiratory phantom that inserted a 3 mm fiducial marker (a gold marker) was used to estimate the accuracy of the Trigger mode. And the 20 bpm was used as reference respiration rate in this study. The marker that placed at the center of the phantom was contoured, and the lower threshold of a gating window was fixed at 2.0 mm using an OBI with Truebeam STx^TM. The upper threshold was measured every 0.5 mm from 1.0 mm to 3.0 mm. The respiration rates were changed every 10 bpm from 10 bpm to 60 bpm. We repeatedly measured five times to check the error rate of the trigger mode in the same condition. Result : The differences of a distance from a peak phase to upper threshold, 1.0 to 3.0 mm at a 20 bpm as a reference for 3 days in a row were 0.68±0.05 mm, 0.91±0.03 mm, 1.23±0.03 mm, 1.42±0.04 mm, and 1.66±0.06 mm, respectively. Measurement result of changes in respiratory rate compared to baseline respiratory rate in maximum absolute difference. The coefficient of determination (R2) to estimate the correlation between the respiration velocity and variation of absolute difference was on average 0.838, 0.887, 0.770, 0.850, and 0.906. The p-values of all the variables were below 0.05. Conclusion : Using Trigger mode during respiratory gated radiation therapy (RGRT), accuracy and usefulness of trigger mode at reference breathing rate were confirmed. However, inaccuracies depending on the rate of breathing it could be uncertain in case of respiration rate is faster than 20 bpm as a standard respiration rate compared to slower than 20 bpm. Consequently, when conducting a RGRT using the trigger mode, real time monitoring is required with well educated respiration.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.10
• /
• pp.61-74
• /
• 2022

Considering that the number of cases in which a structure foundation is located on weathered rock has been increasing recently, for adequate design bearing capacity of a foundation on weathered rock, allowable bearing capacities of such foundations in geotechnical investigation reports were studied. With reference to the study results, the allowable bearing capacity of a foundation on weathered rock was approximately 400-700 kN/m², with a large variation, and was considered a conservative value. Because the allowable bearing capacity of the foundation ground is an important index in determining the foundation type in the early design stage, it can have a significant influence on the construction cost and period according to the initial decision. Thus, in this study, six large-scale plate-bearing tests were conducted on weathered rock, and the bearing capacity and settlement characteristics were analyzed. According to the test results, the bearing capacities from the six tests exceeded 1,500 kN/m², and it shows that the results are similar with the one of bearing capacity formula by Pressuremeter tests when compared with the various bearing capacity formula. In addition, the elastic modulus determined by the inverse calculation of the load-settlement behavior from the large-scale plate-bearing tests was appropriate for applying the elastic modulus of the Pressuremeter tests. With consideration of the large-scale plate-bearing tests in this study and other results of plate-bearing tests on weathered rock in Korea, the allowable bearing capacity of weathered rock is evaluated to be over 1,000 kN/m². However, because the settlement of the foundation increases as the foundation size increases, the allowable bearing capacity should be restrained by the allowable settlement criteria of an upper structure. Therefore, in this study, the anticipated foundation settlements along the foundation size and the thickness of weathered rocks have been evaluated by numerical analysis, and the foundation size and ground conditions, with an allowable bearing capacity of over 1,000 kN/m², have been proposed as a table. These findings are considered useful in determining the foundation type in the early foundation design.

• Journal of Bio-Environment Control
• /
• v.32 no.1
• /
• pp.48-56
• /
• 2023

High-pressure sodium (HPS) lamps have been widely used as a useful supplemental light source to emit sufficient photosynthetically active radiation and provide a radiant heat, which contribute the heat requirement in greenhouses. The objective of this study to analyze the thermal characteristics of HPS lamp and thermal behavior in supplemented greenhouse, and evaluate the performance of a horizontal leaf temperature of sweet pepper plants using computational fluid dynamics (CFD) simulation. We simulated horizontal leaf temperature on upper canopy according to three growth stage scenarios, which represented 1.0, 1.6, and 2.2 plant height, respectively. We also measured vertical leaf and air temperature accompanied by heat generation of HPS lamps. There was large leaf to air temperature differential due to non-uniformity in temperature. In our numerical calculation, thermal energy of HPS lamps contributed of 50.1% the total heat requirement on Dec. 2022. The CFD model was validated by comparing measured and simulated data at the same operating condition. Mean absolute error and root mean square error were below 0.5, which means the CFD simulation values were highly accurate. Our result about vertical leaf and air temperature can be used in decision making for efficient thermal energy management and crop growth.