• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.31-39
• /
• 2012

DVC(Distributed Video Coding) techniques have been attracting a lot of research works since these enable us to implement the light-weight video encoder and to provide good coding efficiency by introducing the feedback channel. However, the feedback channel causes the decoder to increase the decoding complexity and requires very high decoding latency because of numerous iterative decoding processes. So, in order to reduce the decoding delay and then to implement in a real-time environment, this paper proposes several parity bit estimation methods which are based on the temporal correlation, spatial correlation and spatio-temporal correlations between LDPCA frames on each bit plane in the consecutive video frames in pixel-domain Wyner-Ziv video coding scheme and then the performances of these methods are compared in fast DVC scheme. Through computer simulations, it is shown that the adaptive spatio-temporal correlation-based estimation method and the temporal correlation-based estimation method outperform others for the video frames with the highly active contents and the low active contents, respectively. By using these results, the proposed estimation schemes will be able to be effectively used in a variety of different applications.

• The Journal of the Korea Contents Association
• /
• v.18 no.5
• /
• pp.525-538
• /
• 2018

Action learning is a teaching method that is taught through the process of finding real problems and finding solutions. The purpose of this study was to examine the effectiveness of action learning for the college course 'media education for children' which was offered by the Department of Child Psychology and Education at S university in Seoul. According to the process of action learning suggested by Marquardt(2000), college students developed the problem of children's news literacy education and set the purpose, goal and contents of news literacy and developed teaching and learning method for the 6th grade elementary students and applied it to the education field. The college students' evaluation about the action learning lesson were collected by questionnaire and verbal. They found that active and voluntary problem-solving and field application through action learning helped to achieve the goals of the children's media education class. Finally, the importance of close cooperation with the educational field and of appropriate feedback were discussed as a necessary condition of action learning teaching method.

• Journal of The Korean Association of Information Education
• /
• v.18 no.2
• /
• pp.325-334
• /
• 2014

There are management and price problems that have been caused by requirement of RFID reader, Fingerprint Identification System and Clicker for the construct of automatic attendance system to check the students' attendance accurately and quickly. Therefore, in the thesis, we developed smartphone based attendance check system by utilizing Wi-Fi and the smartphones that has been already built without using additional equipments and establishing construction of system additionally. It recognizes date, time, location and the seat number in classroom if a student logs the attendance chocking application in and it also allows students to get lecture feedback and check attendance by taking quizzes and questionnaires that are related to the lecture. As a result, by applying the attendance check system, instructors state that it is convenient since the app allows instructors to communicate with students though the quizzes and questionnaires. Especially, the instructors state that it is convenient because the results of the quizzes, questionnaires and attendance can be downloaded it the from of Excel files.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.786-789
• /
• 2015

Recent concept of smart wort which is advanced from that of existing smart work means the task performance method in which we can provide the highest value to our customers by accomplishing the customer-oriented business creatively, innovatively and quickly. New concept of smart work can come through adding multiple intelligence theory and open innovation to social media technologies which have the characteristics of high connectivity, collective intelligence, rapid feedback. In accordance with the evolution of smart work concept, it is necessary to make the plan and strategy on R&D and standardization through the analysis of key technologies in order to realize the advanced smart work and secure a leading position in smart work market. Accordingly, In this paper, we propose standardization tasks and technologies which our country can lead and present a long-term driving directions by analyzing the conceptual change of smart work, technology trends and standardization trends.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.7
• /
• pp.97-106
• /
• 2012

Management of biosignal data in mobile devices causes many problems in real-time transmission of large volume of multimedia data or storage devices. Therefore, this research paper intends to suggest an m-Health system, a clinical data processing system using mobile in order to provide quick medical service. This system deployed health system on IP network, compounded outputs from many bio sensing in remote sites and performed integrated data processing electronically on various bio sensors. The m-health system measures and monitors various biosignals and sends them to data servers of remote hospitals. It is an Android-based mobile application which patients and their family and medical staff can use anywhere anytime. Medical staff access patient data from hospital data servers and provide feedback on medical diagnosis and prescription to patients or users. Video stream for patient monitoring uses a scalable transcoding technique to decides data size appropriate for network traffic and sends video stream, remarkably reducing loads of mobile systems and networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.172-181
• /
• 2010

In this paper, we propose an adaptive block quantization method. The propose method perfrect reconstructs side information without high complexity in the encoder side, as transmitting motion vectors from a decoder to an encoder side. Also, at the encoder side, residual signals between reconstructed side information and original frame are adaptively quantized to minimize parity bits to be transmitted to the decoder. The proposed method can effectively allocate bits based on bit error rate of side information. Also, we can achieved bit-saving by transmission of parity bits based on the error correction ability of the LDPC channel decoder, because we can know bit error rate and positions of error bit in encoder side. Experimental results show that the proposed algorithm achieves bit-saving by around 66% and delay of feedback channel, compared with the convntional algorithm.

• The Journal of the Korea Contents Association
• /
• v.7 no.6
• /
• pp.79-88
• /
• 2007

As the mobile computers such as Personal Digital Assistants (PDAs) or Smart Phone has been widespread in our daily life, the demand of an extensive data input will gradually be increased. Consequently, many alternative soft keyboards have been proposed to satisfy this requirement. However none of them can provide an absolute solutions for that, the segregated guideline for keyboard arrangement and usage still cause much confusion to the user. Therefore, an integrated guideline is seriously required. In order to come up with the integrated guideline for Korean Soft keyboard GUI, the questionnaire and the experimental test compared with five soft keyboards were conducted in this study. As a result this paper presents five guidelines for improving an input speed of soft keyboard on the mobile computing; following familiarity for effective screen use, using a single key rather than grouping key, considering position of prediction word, considering prompt feedback, finally, considering optimized keyboard size.

• Journal of Elementary Mathematics Education in Korea
• /
• v.15 no.1
• /
• pp.121-139
• /
• 2011

This study conducted experimental problem posing activities using real-life materials. This study investigated the changes on students' mathematical thoughts and attitudes through the activities. This study is conducted via participation of students in a 5th grade class of N elementary school located in Daegu city. As a qualitative case study, this study focused on processes of problem posing rather than results. The problems applying new situations appear, and the used mathematical terms, units, and figures became more practical. The numbers of problems made are increased gradually, and more complex conditions are added as activities are performed. Most of the students revealed interests about problem making activities.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.119-122
• /
• 2007

TRUTEC building, which is located at DMC B block is zone, is just one the office building in Soeul. TRUTEC building is designed by Barkow Leibinger Architeken in Germany, has 5 stories under and 12 stories above and has been finished with the unique three dimensional curtain wall unit. Big trial to make unique elevation succeeded as getting rid of the typical plain curtain wall unit. In addition, aluminum bars are treated by the latest CNC machine in order to achieve 3D section. Construction of curtain wall is highly focused from the moment of contract to keep the schedule because the contract period is 18 months. Regular design meeting and technical meeting between stakeholders including construction manager, designer, engineer, consultant and so on have been held during the construction to minimize the risks from the unique elevation and trial. Step by step mock-up test (design mock-up and visual mock-up on site) has been performed before functional mock-up test.

• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.459-465
• /
• 2018

Of the many factors that affect the clinical outcomes of orthopedic surgery, the surgical procedure is the most important. Robotics have been developed to perform the surgical procedures more accurately and consistently. Robotic surgical procedures in the orthopedic field were developed 20 years ago. Some designs of surgical robots have disappeared due to practical problems and complications, and an another design of surgical robots is emerging. To date, the use of robot surgery in arthroplasty is still controversial in terms of the clinical outcomes, practicality, and cost-effectiveness, even though it has been reported to be effective in the alignment and positioning of components in the field of artificial joints. Early robotic surgery was based mainly on active robot surgery according to the scheduled operation without the intervention of the operator. Recently the semi-active system of robotic surgery has been introduced. In a semi-active system, the robot constrains the surgeon to a haptic boundary defined by the computer based on the 3-dimensional imaging preoperative plan, and the operator can change the preoperative plan through real-time feedback during operation.