• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.67-70
• /
• 2006

In this study micro-thrust measurement method in high vacuum chamber is introduced. This is important for the development of micro-thruster for micro-satellite applications. At Chungnam national University, high-vacuum experimental facility has been constructed to simulate space environment. And strain gauge besed micro-thrust measurement in vacuum chamber has been studied and discussed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.10
• /
• pp.992-997
• /
• 2010

The Propulsion Control Module(PCM) of Hall-thruster Propulsion System(HPS) for Science and Technology Satellite-3 (STSAT-3) has the flow control accuracy of less than ${\pm}$3% and the pressure control accuracy of less than ${\pm}$5%. The pressure controller adjusts pressure around the set point by using a Proportional Flow Control Valve (PFCV) and a high pressure transducer, while the flow controller regulates the flow rate using PFCV and the anode current telemetry of the Hall Thruster. The controllers are chosen as the Proportional and Integral(PI) type, and the PI gains are tuned based on the Matlab simulations. The result of the PCM test had the flow control accuracy of less than ${\pm}$1.87% and the pressure control accuracy of less than ${\pm}$5%. This paper describes the design, realization, and performance test results of the PCM.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.7
• /
• pp.529-536
• /
• 2020

Reaction Control System of the third stage of the Korean Space Launch Vehicle II conducts roll control and 3 axis control throughout third stage engine start, satellite separation, and collision and contamination avoidance maneuver. Reaction control system consumes its propellant in each thruster operation. Hence, loading of proper amount of the propellant is important for mission success. It is needed to have a rough estimation method of propellant consumption during the flight. In this paper, we developed a energy equation using pressure and temperature data which are acquired in the on-board reaction control system. We constructed a test system which is similar with the on-board reaction control system to verify the energy equation. Test results using deionized water were compared with estimated propellant consumption. We also conducted an error analysis of the energy equation. We also presented the propellant consumption result of a system level operation test.

• ICROS
• /
• v.3 no.3
• /
• pp.29-35
• /
• 1997

본 논문에서는 인공위성의 자세를 측정하는 장치로서 태양센서, 지구수평센서, 자이로스코프, 별센서, 자장계 등의 자세감지장치와 궤도조정 및 자세제어를 하기 위한 모멘텀 휠, 반작용 휠, 가스 제트 추력기 등 각종 구동장치의 기술적 특성에 대해서 검토하고자 한다. 본 논문의 주목적은 최근 국내에서 활발히 추진되고 있는 인공위성 개발 사업 관련 위성체와 관련된 일반의 관심을 증대시키고 관련 실무 지식을 소개하고자 하는데 있다.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.121-127
• /
• 2011

In the attitude and orbit control subsystem design, the moment of inertia of the satellite is the major contributor to be considered. Satellites equipped with large solar arrays need to measure the moment of inertia accurately to avoid the interference of the thruster actuation period with its flexible mode. In this paper, the in-orbit tests of COMS to measure the moment of inertia are described. Then, the differences between the measured through in-orbit test and the predicted are compared. Finally, it is verified that the differences are below uncertainty bounds considered in the critical design of COMS attitude and orbit control subsystem.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.30-30
• /
• 1998

다목적 실용위성의 자세 제어용으로 장착되는 하이드라진 단일 추진제 추력기의 연소성능 특성을 살펴보았다. 일차적으로, 연소기내의 화학 평형 계산을 통하여 하이드라진 연소 생성물인 암모니아의 분해율과 초기 엔탈피 수준에 따른 추력기의 성능 특성을 살펴보았다. 다음 순서로, 연소기 내의 비평형 화학 반응 계산을 통하여 연소진행 시간에 화학 조성 및 성능 특성을 살펴 볼 수 있었으며, 최종적으로, 점성 및 비점성, 동결 및 비평형 화학 반응 해석에 따른 성능 특성 변화를 살펴보았다. 본 연구 결과로부터 각 작동 변수에 따른 추격기 성능 특성의 변화를 이해할 수 있었으며, 이는 단일 추진제 추력기 연소실의 구성, 설계 및 추력기의 운용 조건 설정에 중요한 자료로 이용될 수 있을 것으로 기대된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.85-90
• /
• 2003

To control spacecraft including satellite, we should understand precisely the performance of propulsion system and the program logic with appropriate format for satellite operations. In this study, the thruster performance functions was generated by using the best curve fitting for performance data from bi-propellant thrusters. Detailed thruster performance data are, in general, company proprietary information, therefore real firing tests were performed to understand the basic characteristics of the performance curve. Experimental rocket motor utilize liquid oxygen and kerosine as propellant and designed average thrust was 100 pound.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.1
• /
• pp.18-26
• /
• 2007

A development of monopropellant thruster for microsatellite that uses concentrated hydrogen peroxide is described. Catalyst, the most important component in the thruster, was prepared and coated on a monolith honeycomb. Performance evaluation of thruster was peformed by considering the efficiency of characteristic velocity and ignition delay. As a result, 96.0% of $C^*$ efficiency was obtained at designed propellant flowrate and steady state operating condition.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.11
• /
• pp.974-980
• /
• 2014

A power supply of cathode has been developed for hall-effect thruster for small satellite. A microwave cathode has been applied to the electric propulsion system and cathode power is necessary in oder to work securely. Anode current is varied by a flow rate controlled by anode tank pressure. Then cathode current has to be controled in proportion by anode current. So cathode power supply has been designed to offer a current proportional to anode current. Also cathode power has been tuned to work securely for cathode to emit more electron than anode within 0.03A. The function test of cathode power was performed by constructing an equivalent load for anode and cathode. It has been tested in a vacuum chamber in order to ensure a stable operation of the thruster. And it was confirmed that thruster normally has been operated in the space environment after the launch.

• Journal of Space Technology and Applications
• /
• v.2 no.1
• /
• pp.30-40
• /
• 2022

This paper illustrates the trajectory design of drift distance recovery after initial launch and proximity operation when verifying rendezvous/docking technology using nanosatellites. The rendezvous/docking is a technology that is the basis of on-orbit servicing technology and is a preemptive process essential for approaching a target object. In particular, since it is difficult to verify in space, nanosatellites have recently been used to reduce the risk and cost of the development stage. Therefore, this paper not only introduces the configuration and specifications of thrusters for nanosatellites but also designs relative trajectories that can take into account the thrust limitations which come from the small size and low power of nanosatellites. In addition, we intend to be helpful in later designing scenarios according to the improvement of available thruster performance through comparison of trajectories and thrust usage with cases without thrust limitations.