• Journal of Astronomy and Space Sciences
• /
• v.18 no.1
• /
• pp.71-80
• /
• 2001

The threshold voltage shift observed in TDE (Total Dose Experiment) on board the KITAT-1 is converted into dose (rad($SiO_2$)) using the result of laboratory calibration with Co-60 gamma ray source in KAERI (Korea Atomic Energy Research Institute). Simulation using the NASA radiation model of geomagnetosphere verifies that the dose difference between RADFET1 and RADFET3 observed on KITSAT-1 comes from the difference in shielding thickness at the position of these RADFETs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.466-474
• /
• 2014

According to wireless network technology and mobile processors performance were improved, the small wireless mobile device such as smart phones has been widely utilized. The mobile devices can be used GPS information, thereby the services based on location information was increased. GPS was impossible to provide location information in indoor and signal shading environment, and the tracking systems based on short distance wireless communication are required infrastructure. The IEEE 802.11 based tracking system is possible estimation using APs, however the tracking device is exhausted battery power seriously. In this paper, we propose IEEE 802.11 based low-power tracking system. We reduced power consumption from channel scanning and network connection. For performance evaluation, we designed and implemented the tracking tag device, and measured power consumption of the device. As the simulation result, we confirmed that the power consumption was reduced 46% compare to the standard execution.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.1018-1020
• /
• 2012

선박에서 값비싼 장비를 이용하지 않아도 현재 자신의 위치를 알고 싶을 때 스마트폰을 활용하여 자신의 위치를 확인할수 있다. 본 논문에서는 스마트폰에서 입력받은 GPS센서(GPS:Global Positioning System,위성항법장치)의 신호를 적용하여서 구글맵에 표시하여서 자신의 위치 및 경로를 알 수 있다.

• The KIPS Transactions:PartB
• /
• v.14B no.3 s.113
• /
• pp.163-170
• /
• 2007

In autonomous navigation of a mobile vehicle or a mobile robot, localization calculated from recognizing its environment is most important factor. Generally, we can determine position and pose of a camera equipped mobile vehicle or mobile robot using INS and GPS but, in this case, we must use enough known ground landmark for accurate localization. hi contrast with homography method to calculate position and pose of a camera by only using the relation of two dimensional feature point between two frames, in this paper, we propose a method to calculate the position and the pose of a camera using relation between the location to predict through perspective transform of 3D feature points obtained by overlaying 3D model with previous frame using GPS and INS input and the location of corresponding feature point calculated using KLT tracking method in current frame. For the purpose of the performance evaluation, we use wireless-controlled vehicle mounted CCD camera, GPS and INS, and performed the test to calculate the location and the rotation angle of the camera with the video sequence stream obtained at 15Hz frame rate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1544-1550
• /
• 2013

In recent years, Container Security Device(CSD) using GPS & GLONASS to improve logistics efficiency are being extensively researched. The purpose of this paper is to examine the performance development antenna usable cargo container security transport. Antenna developed by study were optimized to match logistics environment apply to GPS/GLONASS dual frequency for monitering system. The measure of antenna have confirmation about frequency characteristics each 1575.42MHz, 1602MHz and VSWR is 2:1 measured in return loss -9.54dB. Reliability of this antenna has been verified about GPS/GLONASS through test-operation between the south korea and Russia.

• 한국HCI학회:학술대회논문집
• /
• 2007.02b
• /
• pp.535-540
• /
• 2007

최근 음악을 재생할 수 있는 다양한 소형기기들의 발전이 이루어지고 있다. 휴대용 음향기기에서 곡을 탐색할 경우, 곡 탐색 습관의 특성상 눈으로 확인하지 않고 손을 사용한 촉각적 피드백만을 이용하는 것이 대부분이다. 또한 곡 탐색 과제는 청각적인 표적을 찾는 것임에 반하여, 지금까지 청각적인 단서에 대한 연구의 대부분은 시각적인 표적을 찾는 것에 집중되어 있었다. 본 연구에서는 청각적인 표적을 탐색하는데 있어 청각적 위치 단서가 미치는 영향을 알아보고자 하였다. 주어진 곡 리스트를 암기한 후, 화면에 제시되는 표적 곡을 탐색하는데 있어 청각적인 위치 단서가 있는 좌우 조건, 가운데 조건, 그리고 무음 조건의 경우에 따른 곡 탐색의 정확률과 반응 시간을 측정하였다. 과제는 정상과 오류 두 가지 유형으로 구성되었다. 결과는 청각적인 위치 정보가 포함된 좌우 조건이 정상 과제와 오류 과제에 있어서 가운데 조건과 무음 조건에 비하여 모두 유의미하게 짧은 반응 시간을 보였다. 본 실험 결과는 휴대용 음향기기뿐만 아니라 위성항법장치(GPS), 가상환경(Virtual Environment) 등과 같이 청각적인 표적을 찾아야 하는 과제를 포함하는 환경에도 적용될 수 있을 것이다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.677-680
• /
• 2010

스마트폰의 빠른 보급으로 위치기반 서비스 (Location Based Service)가 새롭게 주목 받고 있다. 위치기반 서비스는 이동통신망이나 위성항법장치 (GPS) 등을 통해 얻은 위치정보를 바탕으로 이용자에게 여러 가지 서비스를 제공하는 서비스를 말한다. 현재 위치기반 서비스는 소셜 네트워크 서비스, 증강현실, 게임 등 다양한 분야에서 활용되고 있다. 그러나 단순 정보뿐만 아니라 복합 상황정보를 이용한 안전 및 사고예방을 위한 애플리케이션은 부족한 실정이다. 본 논문에서는 휴대성과 이동성의 장점을 가진 스마트 모바일 환경에서 위치기반 서비스를 통해 상황정보를 제공하는 지능형 감시 시스템을 개발하고자 한다. 본 시스템은 감시대상자가 소지한 스마트폰의 GPS를 이용하여 위치 데이터를 획득하고, 기울기 및 압력 센서 등을 이용하여 감시대상자의 상태정보를 획득 한다. 또한 이러한 위치 데이터와 센싱 데이터를 지도 OpenAPI, 날씨 OpenAPI, 안전/위험지역 설정 등의 기능과 결합하여 지능적 복합 상황정보로 표현한다. 이러한 기능들을 안드로이드 기반 애플리케이션으로 개발함으로써 감시자 또한 모바일 환경에서 감시할 수 있도록 한다. 이를 통해 감시자는 이동하면서 원거리에 있는 감시대상자의 실시간 이동경로와 복합 상황정보를 확인하고 알림 받을 수 있다. 이와 같은 기능을 통해 아동 범죄, 노약자 보호 등의 문제를 해결할 수 있다.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.87-95
• /
• 2006

There are hundreds of ship blocks which are under the block assembly, painting, and outfitting assembly works in the pre-erection shops of shipyard. Generally, each block is planned to be processed in a pre-erection shop according to the block type by the long-term production-scheduling before six months. However, many blocks can't be processed in the planned time and the planned shop since the before and after block-processing changes or delays the planned sequential works in pre-erection shops. Therefore, it is essential to monitor the current location of each block and work in process to cope with the changed situation of pre-erection shops. Present study integrates PDA, GPS, and CDMA not only to chase the location of each block but also to exchange the pre-erection work order and the work report between the production-scheduling server and the production managers in the pre-erection shops. This study shows a prototype for the block tracing and process monitoring in the pre-erection shops.

• Journal of Korea Multimedia Society
• /
• v.12 no.4
• /
• pp.600-607
• /
• 2009

In order to obtain continuous navigation information at low cost, we demonstrate, in this work, a position system which is constructed by integrating accelerometers with GPS. The proposed system eliminates vibration and noise elements of accelerometers by using Kalman filter. Calculating continuous navigation information is executed by unifying GPS position data and accelerations of moving and centripetal directions which affect the vehicle. Through simulations and experiments, we show that the performance of GPS can be improved by employing accelerometers. Our proposed system can provide stable and seamless position information where the GPS signal is unavailable due to obstruction like tunnels, and high buildings. The designed system can be implemented at low cost of circuit design and production, and satisfy various installation conditions.

• Journal of Navigation and Port Research
• /
• v.30 no.10 s.116
• /
• pp.839-845
• /
• 2006

A laser docking system provides a centimeter-level accuracy distance from jetty mounted laser sensors in order to help a vessel to approach to a pier. It is very accurate & useful, whereas there are too many considerable problems. Laser sensors of the laser docking system need to be correctly positioned and installed on a jetty to allow for full range of vessels to be berthed and to consider loading condition and tidal variations. Above all, the laser docking system is expensive and its service coverage is limited. In order to solve these problems, CDGPS positioning method using GPS satellites has been proposed. This paper presents that, through RHDOP simulation, the previous CDGPS positioning method using only GPS satellites is not able to provide the continuous service with centimeter-level positioning accuracy. And this paper proposes a pseudolite-augmented positioning method for vessel docking in order to solve the problem of the continuous service on the previous CDGPS positioning method. In this paper, pseudolite is used to aid in CDGPS positioning. This paper shows that the proposed method can provides the continuous service through comparison analysis of RHDOP simulation results between the GPS satellite constellation and the pseudolite-augmented GPS satellite constellation. Furthermore, it is shown that the proposed positioning method satisfies the positioning performance required for vessel automatic docking at a test bed designed for performance evaluation.