• Korean Journal of Environmental Biology
• /
• v.20 no.3
• /
• pp.256-262
• /
• 2002

This research investigated experimentally on the population growth in the aquatic microcosm with the wastewater of plating factory. The purpose of this study was to evaluate the effect of culture conditions of the characteristic growth pattern of the examined species. Population of the system is consists of three organisms; Chlorella vulgaris as a producer, Cyclidium glaucoma as a consumer and Pseudomonas putida as a decomposer. The different growth patterns of each population are followed by surfactant type; Especially C. glaucoma was sensitive, Ch. uvlgaris was maintained population size stably even at high level of surfactant and p. putida was not significantly affected. After treatment of waste water from plating factory, it began to be affected at 1.0% solution treatment to Ch. vulgaris which the cell number was decreased prominently after 2 days, and C. glaucoma was disappeared at 2.5% solution treatment. P. putida was showed increasing pattern according to treatment concentration, at 2.5% solution and population size grew double. The result from current microcosm study indicates that this model system can be applied to environmental assessment method for various pollutants.

• Korean Journal of Poultry Science
• /
• v.37 no.4
• /
• pp.355-360
• /
• 2010

To estimate the genetic characteristics within two brands of Korean native commercial chicken, we used a total of 302 genomic DNAs from two groups (Woorichicken: 152, Hanhyup3chicken: 150). Sizes of 10 microsatellite markers were decided using GeneMapper Software (v.4.0) after analyzing ABI 3130. Genetic diversity indices including expected heterozygosity (Ex H), observed heterozygosity (Ob H) and polymorphism information content (PIC). Frequencies of microsatellites markers were used to estimate heterozygosities and genetic distances. LEI0073 showed the highest value in all genetic diversity (Ex H, Ob H and PIC). On the other hand, MCW322 showed the lowest value in all genetic diversity. The calculated genetic distance of the two brand groups is 0.199 (standard genetic distance) and 0.132 (DA distance). Genetic distances of the two groups were relatively close to each other. Each individual is ramified to two brand groups in phylogenetic dendrogram.

• Korean Journal of Poultry Science
• /
• v.37 no.1
• /
• pp.81-87
• /
• 2010

To estimate the genetic characteristics and cumulative power of discrimination (CPD) Korean Native Chicken. We used a total of 195 genomic DNAs from four breeds population (Korean Native Red chicken: R, Korean Native Yellow chicken: Y, Korean Native Black chicken: L, Ogal chicken: S). Frequencies of microsatellites markers were used to estimate heterozygosities and genetic distances. The lowest distance (0.05) was observed between the R and L strains and the highest distance (0.158) between the L and S strains. Korean native chicken strains (R, Y, K) have each other comparatively near genetic distance. Cumulative power of discriminate (CPD) was 99.999% by including the 10 microsatellites loci individual identification system. And then matching probability in that two different individuals incidentally have same genotype was estimated to $0.36{\times}10^{-7}$. The system employing the 10 markers therefore provided to be applicable to individual identification in Korea native chicken.

• Korean Journal of Remote Sensing
• /
• v.29 no.2
• /
• pp.173-182
• /
• 2013

The early Sea-viewing Wide Field-of-view Sensor(SeaWiFS) atmospheric correction algorithm which is the basis of the atmospheric correction algorithm for Geostationary Ocean Color Imager(GOCI) assumes that water-leaving radiances is negligible at near-infrared(NIR) wavelengths. For this reason, all of the satellite measured radiances at the NIR wavelengths are assigned to aerosol radiances. However that assumption would cause underestimation of water-leaving radiances if it were applied to turbid Case-2 waters. To overcome this problem, Management Unit of the North Sea Mathematical Models(MUMM) atmospheric correction algorithm has been developed for turbid waters. This MUMM algorithm introduces new parameter ${\alpha}$, representing the ratio of water-leaving reflectance at the NIR wavelengths. ${\alpha}$ is calculated by statistical method and is assumed to be constant throughout the study area. Using this algorithm, we can obtain comparatively accurate water-leaving radiances in the moderately turbid waters where the NIR water-leaving reflectance is less than approximately 0.01. However, this algorithm still underestimates the water-leaving radiances at the extremely turbid water since the ratio of water-leaving radiance at two NIR wavelengths, ${\alpha}$ is changed with concentration of suspended particles. In this study, we modified the MUMM algorithm to calculate appropriate value for ${\alpha}$ using an iterative technique. As a result, the accuracy of water-leaving reflectance has been significantly improved. Specifically, the results show that the Root Mean Square Error(RMSE) of the modified MUMM algorithm was 0.002 while that of the MUMM algorithm was 0.0048.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.4
• /
• pp.389-396
• /
• 2012

As the demand on the precise positioning for the moving objects has been increased in the various industry field, many studies have been conducted to analyze real time kinematic technique and its practical usage. The main purpose of this study is to analyze the possibility of Network-RTK(VRS) in real-time kinematic positioning. So, the accuracy analysis has been conducted by comparing the Network-RTK(VRS) position with respect to the RTK position. As a result, Network-RTK(VRS) based on kinematic positioning has centimeter level of RMS in the ideal environment compared to RTK positioning. However, when the integer ambiguities was lost, the accuracy of Network-RTK was meter level. At that time, the quality value has been changed dramatically and shows big correlation with accuracy. When the position and height quality values are within 0.1m, the RMS of the horizontal and vertical position appears better than 10cm and 20cm, respectively. However, if the quality value is over 0.1m, the RMS increases to larger than a meter. Therefore, it is recommended to check the quality value when conducting Network-RTK(VRS) kinematic positioning to get the centimeter level accuracy.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.3
• /
• pp.239-248
• /
• 2001

Far-ultraviolet IMaging Spectrograph (FIMS) is the main payload of the first Korean scientific satellite, KAISTSAT-4, which will be launched in 2002. Among the optical parts, parabolic cylinder mirror does not have any heritage from previous astronomical missions, so the manufacturing and testing process itself is a challenging issue. We describe the method of manufacturing and measuring of the off-axis parabolic cylinder mirror and our initial experiments to establish the entire manufacturing process. Using the method, the profile error can meet the specification of $lambda$ per cm which is closely related with the astronomical performances. In case of the surface roughness, temperature controlled pitch polishing reduces $R_{q}$ under 1 nm implying that scattering in the entire spectral range of FIMS is less than 2% of the incident UV light.

• Korean Journal of Remote Sensing
• /
• v.27 no.5
• /
• pp.507-520
• /
• 2011

Conventional radar altimeter system measured directly the distance between the satellite and the ocean surface and frequently used by aircraft for approach and landing. The radar altimeter is good at flat surface like sea whereas it is difficult to determine precise three dimensional ground coordinates because the ground surface, unlike ocean, is very indented. To overcome this drawback of the radar altimeter, we have developed and validated the interferometric radar altimeter signal processing which is combined with new synthetic aperture and interferometric signal processing algorithm to extract precise three-dimensional ground coordinates. The proposed algorithm can accurately measure the three dimensional ground coordinates using three antennas. In a set of 70 simulations, the averages of errors in x, y and z directions were approximately -0.40 m, -0.02 m and 4.22 m, respectively and the RMSEs were about 3.40 m, 0.30 m and 6.20 m, respectively. The overall results represent that the proposed algorithm is effective for accurate three dimensional ground positioning.

• Parasites, Hosts and Diseases
• /
• v.34 no.2
• /
• pp.121-126
• /
• 1996

For the detection of Cwptospori,mum oocysts, fecal samples were collected from 201 calves which showed diarrhea. Among the 201 samples, 29 samples (14.4%) were positive for Cwptosporinium spry. by the DMSO-modified acid-fast stain (MAFS) , 23 samples (11.4%) were positive by commercial kit (Meridian Diagnostics, Cincinnati, Ohiol and 23 by the indirect immunofluorescence antibody (IFA )assay employing the monoclonal antibody (mAb C6). When tested by both IFA and MAFS, 20 fecal samples were positive for Cwptosporinium oocysts whereas 169 fecal samples were negative. If the MAFS is considered a standard method for oocyst detection, the IFA showed 69% of sensitivity and 98% of specificity. When tested by both IFA and commercial kit, 22 fecal samples were positive for Cwptospori,mum oocysts while 177 samples were negative. One sample tested by IFA was found to be false negative, when compared with the results by commercial kit. The sensitivity of IFA was calculated as high as 96%; the specificity as 99% and the predictive value was also 99%. In the present study, IFA employing the nAb C6 revealed that 23 samples (11.4%) were positive among the 201 calves showing diarrhea. Of 23 IFA positive samples, 4 samples (5%) showed cryptosporidial oocysts more than 105 OPG Therefore. it is concluded that the calves showing cryptosporidial oocysts more than 105 OPG in the feces were highly associated with clinical cryptosporidiosis.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.3
• /
• pp.140-149
• /
• 2002

This paper describes the characteristics of beam-tilting slot away waveguide antennas for mobile DBS reception. As a basic study of slotted waveguide array, design for 16 slot elements located on a broad-wall waveguide is considered. Design parameters such as slot length, space between each slot and cross slot angle of antennas with the beam-tilting characteristics are calculated by method of moments. Based on these results, the radiation waveguide antennas with 16-element $\times$16-array are designed and fabricated. The measured main beam direction angles of the fabricated antennas are 48$^{\circ}$to 50$^{\circ}$depending on the measured frequencies and it shows good agreement with prediction. The measured 3 dB beam width of elevation pattern is about 13$^{\circ}$, and the axial ratio and the gain measured at DBS band are observed 2.8 dB below and 24 dBi above, respectively. In order to evaluate a performance of the fabricated waveguide planar antenna, it is combined with the satellite tracking control system and the field performance test of antenna mounted on a mobile vehicle is carried out at highway. During the measurement, it was possible to watch television without a break signal in a driving vehicle and an excellent performance of the proposed antennas was demonstrated.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.90-98
• /
• 2008

Nanotechnology(NT) refers to a field of advanced micro-technology covering the creation and manufacturing of materials on the atomic and molecular scale and requires interdisciplinary study with various fields including materials science, physics, chemistry, electronics and others. Whileas nanotechnology is a kind of micro and small scaled science, space technology(ST) is one of the larger and system technologies utilizing broad fields of mechanical, materials, electronics and communication technologies. It is necessary to select and concentrate the functional items of nanotechnology for efficient application to be utilized in space technology, due to the cross-sectional characteristics of nanotechnology within nanomaterials, nanoelectronics, and nanomanufacturing. This paper provides the current state of art of nanotechnology in space technology by evaluating NASA's activities and the 9th frame of the project ANTARES(Analysis of Nanotechnology Applications in Space Developments and Systems) with the support of the German Aerospace Center (DLR), Space Flight Management, Division Technology for Space Systems and Robotics. It has shown that it is necessary to apply nanotechnology to space technology in order to achieve international competitiveness, for the nanotechnology can bring the previously impossible things to reality. Since KARI plans to send an unmanned probe to the moon's orbit and land a probe on the moon's surface in 2025, it is urgently needed to incorporate nanotechnology to national space development plan.