• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.461-470
• /
• 1999

This paper presents the description of a 4-bit digital p-i-n diode phase shifter that was designed for quasimillimeter wave band satellite receiver to use in phased-array systems. 180$^{\circ}$ and 90$^{\circ}$ cells are designed in reflection type that consists of a 3-dB rat-race hybrid coupler, 45$^{\circ}$ and 22.5$^{\circ}$ cells are designed in loaded-line type to reduce the size of circuit and the number of diode to be used. The 4-bit phase shifter uses eight p-i-n diodes mounted in the microstrip circuit. The average insertion loss for the 16 phase states is 6.92dB over the 19.8~20.3 GHz band and maximum phase error is 6.2$^{\circ}$ at 20 GHz.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1129-1132
• /
• 2003

본 논문에서는 위상/주파수 검출기을 설계시 문제가 되는 Reference Spur을 없게 하여 Low Noise를 구현할 수 있는 No Spike PFD(Phase Frequency Detector)를 제안한다. 위상동기루프의 특별한 형태로 차지 펌프 위상동기루프가 있다. 차지 펌프위상동기 루프는 일반적으로 3-state 위상/주파수 검출기를 이용한다. 이 3-state 위상/주파수 검출기는 기준 신호와 VCO 출력 신호의 위상차에 비례하는 디지털 파형으로 출력을 내보낸다. 차지 펌프 위상동기루프 그림 1 처럼 디지털 위상/주파수 검출기(PFD), 차지 펌프(CP), 루프 필터(LF), VCO로 구성된다. PFD 는 기준 신호와 VCO 에 의해 만들어진 출력 신호를 입력받아 각각의 위상과 주파수를 비교한다. 즉, 출력 신호가 기준 신호보다 느릴 때에는 출력 신호를 앞으로 당기기 위해서 up 신호를 넘겨주고, 출력 신호가 기준 신호보다 빠를 때에는 출력 신호를 뒤로 밀기 위해 down 신호를 넘겨준다. 차지 펌프(CP)의 전류를 Ip 라고 한다면, CP 에서 LF 로 흐르거나, LF에서 CP로 흐르는 전류 Ip의 평균량이 기준 신호와 VCO 출력 신호의 위상차에 비례하는 것이다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.77-84
• /
• 2005

The orthogonal frequency division multiplexing (OFDM) technique and the single carrier with cyclic prefix (SC-CP) scheme are very attractive solutions for wireless applications, being computationally efficient since equalization is performed in the frequency domain. The equalizer could not entirely handle significant mean. Doppler shift. This motivates the use of a phase error tracking loop that operates jointly with the frequency equalizer. This paper describes the effect of the mean phase error and the performance of the proportional equalizer coupled with a phase error tracking loop based on decision-directed method. Furthermore, simulation results show that we can reduce the computational toad of the tracking loop with minimal performance degradation.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.73-78
• /
• 2015

Purpose : Under the assumption of change to the amplitude based sorting, the study will use four dimensional computed tomography imaging (4DCT) arrayed using the phase based sorting to analyze the respiratory phase difference. Materials and Methods : The study analyzed the 4DCT (4-dimensional computed tomography) images of 10 liver cancer patients that were treated with respiratory gated radiotherapy from 2015 February to March. Using RPM respiratory gating (RPM 1.7.5, Varian, USA) equipment, imaging according to respiratory cycle of phase based sorting was acquired and using a treatment planning system (Pinnacle 9.2, Philips, USA) the acquired imaging according to respiratory cycle was used to measure the abdominal movement value by respiratory cycle. The measuring point was the point where the center point of the Marker Block and the body surface met in the 50% phase image and here the coordinate values Lateral, Vertical, Longitudinal (X, Y, Z) were set as reference points, and on the X, Z plane identical to the reference point, using the identical method the Y axis coordinate value of each 0%, 30%, 40%, 50%, 60%, 80% phase images were acquired to quantitatively measure the variation of distance to the Y axis. The abdominal movement value according to respiration was applied to the theoretical model that the value decreases linearly from maximum inhalation to maximum exhalation to divide the variation of my value to predict as amplitude value by respiratory cycle and conversely the variation in amplitude was recalculated with the phase variation deviation value to analyze. Results : The deviation value between expected value and actual location was the largest in the 30% phase with 0.24 cm, and standard deviation was also the largest in 30% phase with 0.13 cm. The effective value of the deviation value derived from the average of the deviation squared value of each patient appeared as minimum 0.7 cm, maximum 0.18 cm, average 0.12 cm, and standard deviation 0.4 cm. Also by dividing the actual movement distance value with the peak expiration value then converting it into %Phase, the deviation value with actual phase 16.5% in 30% phase, 10.0% and 40% phase, 10.0% and 60% phase, 15.4% and 80% phase, and overall average about 13%, and arraying based on amplitude, phase shift occurred and further it was from peak expiration the chance of deviation occurrence was increasingly measured. Conclusion : Based on the results of the study there were differences between value acquired based on theoretical model and actual value. Therefore in respiratory gated radiotherapy using external surrogates, there needs to be establishment of respiration gated radiation system that avoids the combination of two Sorting methods considering that there will be occurrence of treatment and corresponding clinical differences due to the phase difference that occur due to the Amplitude based Phase Sorting.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.274-280
• /
• 2005

Experimental investigations were carried out in an atmospheric pressure, optically accessible and laboratory-scale dump combustor. The objective of this study is to obtain the phase-resolved gas temperatures at different phases of the oscillating pressure cycle during unstable combustion. To see the effect of incomplete fuel-air mixing on phase-resolved temperature characteristics, CARS temperature measurements were performed. Results including phase-resolved averaged temperature, normalized standard deviation and temperature probability distribution functions (PDFs) were provided in this paper. It could be found that the profile of mean temperature showed the in-phase relationship with pressure cycle. Temperature PDFs give an insight on the flame behavior as well as NOx emission characteristics. These results would be expected to play an important role in better understanding of driving mechanisms and thermo-acoustic interactions.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.72-73
• /
• 2013

본 논문은 계통 연계형 인버터에서 LPN 필터를 이용한 계통 위상 추종 방법을 제안한다. 기존의 FFT를 이용한 계통 위상 추종 알고리즘의 한주기 평균 계산부를 LPN 필터로 대체하여 위상 추종 성능을 개선하였다. 기존의 FFT-PLL의 경우 SRF-PLL과 달리 별도의 PI 게인 튜닝이 필요 없으며, 고조파와 같은 노이즈에 강인한 특징을 가진다. 하지만 위상 이동시에 새로운 위상을 추종하기 위해서 한주기 소요된다. 따라서 본 논문에서는 LPN 필터를 사용하여 반주기 이내에 추종할 수 있도록 성능을 개선하였다. 제안된 위상 추종 전략의 타당성을 실험을 통하여 검증하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.1187-1190
• /
• 2022

최근 홀로그램(Hologram)을 광학현미경(light microscopy)에 적용하여 시료의 두께를 측정하는 방식의 연구가 활발하게 진행되고 있다. 빛의 간섭패턴(Interference pattern)을 사용하여 시료의 두께를 측정할 수 있는 이유는 시료의 두께에 따라 빛의 위상(phase)이 달라지기 때문이다. 빛의 간섭패턴을 저장하는 홀로그램에서 위상만을 분리한 후 위상을 unwrapping 하면 물체의 두께를 측정할 수 있다. JPEG은 기존의 연구방식인 시료를 통과한 홀로그램 이미지를 직접 압축하는 object 압축방식을 사용한다. 하지만 본 논문에서는 object 압축방식과 달리 홀로그램 이미지를 직접 압축하지 않고 홀로그램 이미지에서 시료의 위상(phase)만을 분리하여 위상 도메인에서 압축하는 방식을 취하였다. 이를 통해 object 압축방식에 비해 위상 도메인 압축방식에서 모든 데이터셋에 대하여 평균적으로 0.0003~0.0142 radian의 성능향상을 이룰 수 있었다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.11a
• /
• pp.49-52
• /
• 2000

최근에 3차원 데이터는 그 크기가 상당히 커지고 있으며, 이에 따라 3D 그래픽 파이프라인에 데이터를 전송할 때 메모리 버스 대역폭의 병목 현상에 대한 문제가 크게 대두되고 있다. 이를 해결하기 위한 방법으로 모델링된 3차원 데이터의 위상 정보를 압축하여 보내는 방법이 연구되고 있다. 본 논문에서는 3차원 데이터의 위상 정보를 효율적으로 압축하는 방법과 자료구조를 제안하였다. 기존의 위상 압축 방법들의 선형적인 탐색 방법에 비해 보다 효율적인 나선형 깊이 우선 탐색 방법을 사용하였다. 제안하는 방법은 이미 탐색한 정점들의 재사용도를 높임으로써 압축과정에서 생성되는 허프만 테이블의 크기를 줄였고 전체적으로 압축되는 데이터의 크기도 보다 줄였다. 실험한 결과, 비트수/정점이 평균 1.7 정도이었고, 비트수/폴리곤이 평균 1.3 정도고 이전 방법들보다 1.5배에서 2.5배정도 나은 결과를 보였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.1
• /
• pp.12-17
• /
• 2015

In this study, we analyzed and showed the enhanced thermal resolution of a lock-in infrared thermography system by employing a blackbody system and micro-register sample. The noise level or thermal resolution of an infrared camera system is usually expressed by a noise equivalent temperature difference (NETD), which is the mean square of the deviation of the different values measured for one pixel from its mean values obtained in successive measurements. However, for lock-in thermography, a more convenient quantity in the phase-independent temperature modulation amplitude can be acquired. On the basis of results, it was observed that the NETD or thermal resolution of the lock-in thermography system was significantly enhanced, which we consider to have been caused by the averaging and filtering effects of the lock-in technique.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.959-966
• /
• 2010

Quantitative ultrasound analysis provides fundamental information of various ultrasound parameters using spectral information of the short-gated radiofrequency(RF) data. Therefore, accurate extraction of spectral information from backscattered RF signal is crucial for further analysis of medical ultrasound parameters. In this paper, we propose two techniques for calculating a more accurate power spectrum which are based on the phase-compensation using the normalized cross-correlation to minimize estimation errors due to phase variations, and the weighted averaging technique to maximize the signal-to-noise ratio(SNR). The simulation results demonstrate that the proposed method estimates better results with 10% smaller estimation variances compared to the conventional methods.