• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2002.11a
• /
• pp.93-98
• /
• 2002

MPEG-4 SNHC 표준에서 사용되는 평행사변형 예측방법은 예측하고자 하는 꼭지점이 인접한 꼭지점들과 같은 평면상에 있다고 가정하여 하나의 삼각형 내에 있는 인접한 세 개의 꼭지점 좌표 값만을 이용하므로 예측 효율이 좋지 않다. 본 논문에서는 삼각형 주변의 꼭지점 좌표 값과 인접하는 삼각형 사이의 사잇각을 고려한 통합예측을 이용하여 삼차원 메쉬 모델의 기하정보를 부호화하는 방법을 제안한다. 우선 꼭지점 계층탐색 방법으로 위상학적으로 거리가 가까운 점들을 탐색하여 정렬된 값들의 기하학적 상관도를 높이고, 정렬된 삼차원 메쉬의 꼭지점 순서에 따라 주변의 꼭지점 값들을 이용하여 현재 꼭지점 값을 예측한다. 본 논문에서 제안한 통합예측 방법은 다양한 VRML 포맷의 테스트 모델에 대해서 기존의 MPEG-4 SNHC의 평행사변형 예측 방법보다 우수한 성능을 보인다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2005

This paper presents the experimental results measured by photoelastic 4-step phase shifting method for the isochromatic fringe distribution in a TV glass panel. In the conventional photoelastic method, the isochromatic fringe orders are measured manually point by point. The 4-step phase shifting method uses four images obtained from a circular polariscope by rotating the analyzer to $0^{\circ},\;45^{\circ},\;90^{\circ}$, and $135^{\circ}$. In order to use the 4-step phase shifting method, the elements of a polariscope should be aligned to isoclinic direction at a point and/or along a line where isochromatic fringe distribution is measured. Experimental results obtained from the 4-step phase shifting method are compared with those measured by the Senarmont compensation method. Both results are well agreed. Then, isochromatic fringe distributions in the TV glass panel that is heat-treated before and after are compared. Maximum and minimum isochromatic fringe orders in the TV glass panel with before- and after-heat treatment are changed approximately two times.

• Korean Journal of Optics and Photonics
• /
• v.25 no.1
• /
• pp.29-37
• /
• 2014

We have studied and demonstrated general, systematic error-correction methods for a dual rotating quarter-wave plate ellipsometer. To estimate and correct 5 systematic error sources (three offset angles and two unexpected retarder phase delays), we used 11 of the 25 Fourier components of the ellipsometry signal obtained in the absence of an optical sample. Using these 11 Fourier components, we can determine the errors from the 5 sources with nonlinear optimization methods. We found systematic errors ${\epsilon}_3$, ${\epsilon}_4$, ${\epsilon}_5$) are more sensitive to the inverted Mueller matrix than retarder phase delay errors (${\epsilon}_1$, ${\epsilon}_2$) because of their small condition numbers. To correct these systematic errors we have found that error of any variety must be less than 0.05 rad. Finally, we can use the magnitudes of these errors to correct the Mueller matrix of optical components. From our experimental ellipsometry signals, we can measure phase delay and the rotational angular position of its fast axis for a half-wave plate.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.467-474
• /
• 2019

Recently, optical phased array(OPA) based laser detection and ranging(LADAR) has gained great interest to replace the traditional mechanical light detection and ranging technique(LiDAR). In OPA-based LADAR, it is well known that phases of laser pulses traveling through each of channels should be the same to obtain a narrow free-space single beam without noise-like ripples in the far field. However, it is difficult to provide such ideal condition due to the fabrication errors. To tackle this problem, any algorithms should be necessary to compensate the initial random phases of each channel in OPA antenna. In this paper, we propose a hill-climbing based phase calibration algorithm and evaluate the performance of the proposed algorithm.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.392-398
• /
• 2003

We present a novel concept of a phase-shifting diffraction-grating interferometer, which is intended for the optical testing of concave mirrors with high precision. The interferometer is configured with a single reflective diffraction grating, which performs multiple functions of beam splitting, beam recombination, and phase shifting. The reference and test wave fronts are generated by means of reflective diffraction at the focal plane of a microscope objective with large numerical aperture, which allows testing fast mirrors with low f-numbers. The fiber-optic confocal design is adopted for the microscope objective to focus a converging beam on the diffractive grating, which greatly reduces the alignment error between the focusing optics and the diffraction grating. Translating the grating provides phase shifting, which allows measurement of the figure errors of the test mirror to nanometer accuracy.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10a
• /
• pp.367-369
• /
• 2001

논리 회로는 하드웨어로 직접 구현할 수도 있으나, 설계된 디지털 논리를 프로그램으로 구현하고 이를 내장형 프로세서가 실행하게 하는 방식으로 구현할 수 있다. 이러한 구현은 내장형 시스템에 적합하도록 코드 크기와 실행 속도가 효율적이어야 한다. 본 논문에서는 복사 전파, 데드코드 삭제, 위상 정렬등의 컴파일러 최적화 기술과 함수 단위 모듈 개념을 도입하여 신호 흐름 분석 기법의 C 코드 자동 발생기를 구현하였다. 회로 시뮬레이션 구현 기법 중 유한 상태 천이 모델 기법으로 코드를 발생하는 Esterel 시스템과 성능 비교 실험을 한 결과, 코드 크기는 평균 84.17%로 감소되었으며 실행 속도는 평균 4.68배로 향상되었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.21-26
• /
• 2008

In this paper, a novel 622Mbps burst-mode clock and data recovery (CDR) circuit is proposed for passive optical network (PON) applications. The CDR circuits are implemented with 0.35um CMOS process technology. Locking dynamics is accomplished with instantaneous feature and data are sampled at an optimal timing. This is realized by seven different delay configurations, which are generated from precisely-controlled delay buffers. The experimental results show that the proposed CDR circuits are operating as expected, recovering an incoming 622Mbps burst-mode input data without errors.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.7
• /
• pp.499-506
• /
• 2003

In this paper, we propose the shift and noise tolerance method using a virtual phase image and a joint transform correlator (JTC) architecture that can alleviate the need for an accurate optical axis alignment. An encrypted image is obtained by the Fourier transform of the product of a phase- encoded virtual image to camouflage the original one and a random phase image. Therefore, even if unauthorized users analyze the encrypted image, we can prevent the possibility of counterfeiting from unauthorized people using virtual image which dose not contain any information from the original image. We demonstrate the robustness to noise, to data loss and to shift of the encrypted image using a JTC in the proposed description technique.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.894-901
• /
• 2017

In the existence of motion, azimuth phase error due to accuracy limitation of GPS/IMU and system delay is unavoidable and it is essential to apply autofocus to estimate and compensate the azimuth phase error. In this paper, autofocus algorithm using MWLS(Modified WLS) is proposed. It shows the robust performance compared with original WLS using new target selection/sorting metric and iterative azimuth phase estimation technique. SAR raw data obtained in a captive flight test is used to validate the performance of the proposed algorithm.

• Korean Journal of Optics and Photonics
• /
• v.12 no.5
• /
• pp.362-370
• /
• 2001

We prove that 3-D profile mapping using white light interferometry has systematic errors caused by aberrations of the optimal system. The tilt of an object invokes an offset between the object and the reference ray, which eventually makes the aberration cancel incompletely. The fringe peak of a white light interferogram is mainly affected by the aberration effect while the envelope peak remains stable. By the difference between the two peaks, it is easily confirmed how much the error existed in the fringe peak. Experimental results prove that the error caused by aberration is varied by object tilt, microscope NA, optics alignment within the range of $\pm$50nm.