• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2551-2556
• /
• 2009

The principal operation of a ring laser gyroscope depends on the phase difference for the counter-propagating waves within a closed path. The reflection mirrors mounted on the resonator block form the traveling waves. Thus, the dimension accuracy of resonator block influences the traveling path of beam. In order to maintain the stable optical beam path in the ring resonator, the piezo-driven moveable mirror is adopted for the path length control under the thermal expansion or mechanical strain of resonator block. This paper presents the mathematical description of the elastic behavior of piezo-driven mirror. This description can be applied for the concept design of piezo-driven mirror.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.5
• /
• pp.854-859
• /
• 2009

Many pilot projects are developed using USN(Ubiquitous Sensor network). Recently USN has more attention to be used for the applications of circumstance monitoring. In order to acquire information from sensor nodes, sensor nodes need a RF transceiver. In this paper we describe the design of a RF transceiver, based on IEEE 802.15.4, for sensor nodes operating in 2.4GHz frequency band. The architecture to be implemented and the electrical performance specifications satisfied IEEE 802.15.4 are presented. The noise figure of a receiver, selectivity, phase noise of a frequency synthesizer, transmitter's linearity and spectrum mask are derived as a design parameters from the specifications of IEEE 802.15.4.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7A
• /
• pp.635-640
• /
• 2002

We investigate optimal and suboptimal decision rules for parallel code acquisition in chip asynchronous direct-sequence spread-spectrum systems. The conventional decision rule for parallel acquisition is to choose the largest correlator output of a receiver. However, such a scheme is optimum only for chip synchronous models. In this paper, an optimal decision rule is derived based on the maximum-likehood criterion for chip asynchronous models. A simpler suboptimal decision rule is also discussed. The performance of the optimum and suboptimum decision rules is compared to that of the conventional decision rule. Numerical results show that, for chip asynchronous models, both the optimal and suboptimal decision rules outperform the conventional decision rule.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.15-20
• /
• 2012

In this paper, we designed and analysed K-band front-end module for digital microwave communication system receiver which improvement of dynamic range. We also suggested method of minimum amplified input signal level used to minimize noise figure of low-noise amplifier for High dynamic range. The designed modules consist of active mixer with conversions gain and PL-DRO with high stability and quality factor. The designed modules performance is that has the characteristics of over 54dB conversion gain, 1.3dB noise figure.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.6
• /
• pp.68-77
• /
• 2003

An improved negative capacitance circuit that cancels out input impedance of a front-end in a bioimpedance measurement and operates stably with a low gain margin has been proposed. Since the proposed circuit comprises wide-band operational amplifiers, selecting operational amplifiers is easy, while an operational amplifier of prefer bandwidth should be chosen to apply conventional circuit. Also, since gain margin can be controlled by a feedback resistor connected serially with a feedback capacitor, gain margin is tuneable with a potentiometer. The input impedance of the proposed circuit is two times larger than that of the conventional circuit and 40-times than that without a negative capacitance circuit. Furthermore, closed-loop phase response of the proposed circuit is better than that of the conventional circuit or without a negative capacitance circuit. Above all, for the proposed circuit, the frequency at which a gain peaking occurs is higher than the frequency at which the loop gain becomes a maximum. Thus, the proposed circuit is not affected by a gain peaking and can be operated with a very low gain margin.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.1
• /
• pp.49-55
• /
• 2003

The use of digital filters in the signal process field is increasing rapidly with development of the modern industrial society. Especially, detail processors, Y/C separators, ghost removing filters, standard converters (NTSC to PAL or PAL to NTSC) and noise reducers, all of which use digital filters, tend to be used in digital video and audio processing, CATV and various communication fields. Generally, there are two different digital filters, the Rf (infinite impulse response) filter and the FIR (finite impulse response) filter in digital filter. In this paper, we have designed FIR filter which has the phase linearity and the easiness of creation. In the design of the FIR digital filter, the window function is used to alleviate the ripples caused by Gibbs Phenomenon around the cut off frequency of the band pass. But there're some problems to choose proper window function for the design destination due to its fixed values. Therefore, in this paper, we designed a modified Hanning window with new parameter which is adaptively chosen corresponding to design objectives. The digital filter was simulated to prove the validity of the model and it was compared with the Hamming, the Manning, the Blacknan and the Kaiser window function. And we have used peak side-lobe and transient characteristics as standard of judgement.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.12
• /
• pp.75-82
• /
• 2010

This paper presents a wideband ${\Delta}{\Sigma}$ fractional-N frequency synthesizer for a multi-band single chip CMOS RFIC transceivers. A wideband VCO utilizes a 6-bit switched capacitor array bank for 2340~3940 MHz frequency range. VCO frequency calibration circuit is designed for optimal capacitor bank code selection before phase locking process. It finishes the calibration process in $2{\mu}s$ over the whole frequency band. The LO generation block has selectable multiple division ratios of ${\div}2$, ${\div}16$, and ${\div}32$ to generate LO I/Q signals for T-DMB/DAB/FM Radio systems in L-Band (1173~1973 MHz), VHF-III (147~246 MHz), VFH-II (74~123 MHz), respectively. The measured integrated phase noise is quite low as it is lower than 0.8 degree RMS over the whole frequency band. Total locking time of the ${\Delta}{\Sigma}$ frequency synthesizer including VCO frequency calibration time is less than $50{\mu}s$. The wideband ${\Delta}{\Sigma}$ fractional-N frequency synthesizer is fabricated in $0.13{\mu}m$ CMOS technology, and it consumes 15.8 mA from 1.2 V DC supply.

• Journal of the Korean Society of Radiology
• /
• v.4 no.3
• /
• pp.19-25
• /
• 2010

Dysphagia is common and serious problems in post-stroke patients. The post-stroke dysphagia with aspiration is associated with dehydration, malnutrition, pneumonia, sepsis and death. Up to date, gag reflex and choking history used to decide the aspiration in clinical. The purpose of this study was to evaluate the aspiration and to choice the proper meal formation using by video fluoroscpic swallowing study(VFSS) with post-stroke dysphagia patients. 58 post-stroke patients and ten normal person participated to perform the VFSS with liquid type, puding, yoplait, rice mixed with barium(Ba). Two rehabilitation medicine doctors and a radiological technologist analysed the phase(oral, pharyngeal, esophageal phase)with video film, and checked the pharyngeal transition time(PTT). 38 patients showed abnormality in pharyngeal phase, 13 patients in oral and pharyngeal phase, 3 patients in oral phase, and 2 patients in pharyngeal and esophageal phase. 43 patients(65.2%) occured the aspiration, but 23 of 43 patients improved by the chin tuck position. Aspiration occured 34 patients in liquid type, 2patients in rice gruel and nothing in boiled rice. After VFSS, 13 of 23 patients change the intaking pathway from nasogastric tube(NGT) to oral, On the contrary with 3 of 42 patients from oral to NGT. Consequently VFSS is clearly effective to evaluate the aspiration with post-stroke dysphagia patients.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.191-200
• /
• 2003

This paper presents the rheological properties of bitumen for reducing negative skin friction. The bitumen has been widely used due to both the cost and construction effectiveness. Also, it is well known that the use of bitumen for reducing negative skin friction renders the best results among other available methods. Three different modified bitumens were used for the testing programs. The physical tests include the penetration, the softening point and penetration index. The rheological tests include phase angle, complex modulus, creep tests and flow tests. The tests were conducted at four different temperatures(15, 30, 45 and 6$0^{\circ}C$) in order to simulate the field condition. The test results were analyzed using the phase angle, G$^*$/sin $\delta$, creep compliance and shear viscosity. The result of tests showed that the phase angle increased and G$^*$/sin $\delta$ decreased with the increase of temperature. The creep compliance increased as the loading time increased. The difference of the creep compliance is detected as the time and temperature are varied, however, the difference of the shear viscosity is not significant among the samples tested in this study. The rheological properties of the bitumen also showed that the physical testing method and the temperature dependant testing method are somewhat limited to showing and expressing the full rheological properties of the modified bitumen. The introduction of the time and the temperature dependent testing method is necessary to find out the full rheological properties of the modified bitumen.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.337-341
• /
• 2011

To expand the viewing angle of vertical alignment liquid crystal display (VA-LCD), a wide-band compensation film has been newly developed. VA-LCD needs a retardation film with improved oblique viewing property. The retardation film for VA-LCD has been fabricated by solvent casting and subsequent drawing triacetylcellulose (TAC) containing optical additives. Here, optical birefringence and wavelength dispersion of the retardation film strongly depend on the chemical structures of optical additives. Utilizing quantum mechanical computation, the polarizing anisotropy of retardation film was calculated with respect to additives. It is also realized that the wavelength dispersion of polarizing anisotropy depends on the type and location of substituent to the selected main isomer. When two propionates are substituted to the meta position of the selected main isomer, the wavelength dispersion of polarizing anisotropy shows the most gentle slop, which is well matched with the experimental results. The most gentle slop of wavelength dispersion means that the viewing angle characteristics of LCD are less influenced according to the wavelength of light source of LCD, and it's possible to make better image quality than the present level.