• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.498-503
• /
• 2003

We analyze the electro-optic polarization transmission characteristics of liquid crystal cells in the Poincare sphere representation. We determine fundamental conditions on maximizing of brightness and contrast ratio of liquid crystal display devices for polychromatic light by use of retardation films. For optimizing two colors, at least two properly designed retardation films are needed, and for three wavelengths, either it can be approximated to the two-color case or three retardation films are needed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.5
• /
• pp.501-507
• /
• 2009

By using topology and shape optimization, a theoretically optimum FRP deck was proposed. Firstly, a topologically optimal shape, truss-like structure without hinges, was found. A truss-shape frame is the most ideal structure when subjected to a concentrated force at the center of simply supported beam. An armature was found at the point joining horizontal chord and diagonal chord, which was used as a new design variable. Secondly, optimum value of each variable was decided through shape optimization using genetic algorithm. To compare it with existing commercial FRP decks, shape optimization was performed by fixing the height of FRP decks. To verify the performance of the FRP deck proposed in this study, a finite element analysis was performed. As a result, it satisfies serviceability and safety guide lines of FRP decks.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.34-39
• /
• 2005

We presented the method to obtain four speckle patterns with relative phase shift of ${\pi}/2$ by passive devices such as wave plate and polarizer, and calculate the phase at each point of the speckle pattern in shearography using Wollaston prism. And, we analyzed the phase error caused by wave plates used in the proposed method by Jones matrix.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.10-14
• /
• 1999

One dimensional inhomogeneous phase modulation effects on the MTF of optical system was investigated. The lens under test was a doublet made in Korea. It was 36 mm effective diameter, 128.04 mm effective focal length. The ray-fans and spot diagrams were calculated and presented on the picture for on-axis and off-axis (field of view, $1^{\circ}$ and $2^{\circ}$). Phase modulation was carried out by positioning a phase modulator close contacted with the lens under test. One was linear type that had linearly increasing phase retardation and the other was stepped type which had phase difference $\pi$ for each step. The MTFs were measured on the Gaussian image plane and were compared with one another. The MTFs of linear type phase modulated apertures had a little lower values than the MTF of unmodulated aperture for on-axis but most of all the MTFs of one dimensional phase modulated aperture are improved than the MTF of unmodulated aperture.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.309-312
• /
• 2004

본 연구에서는 매미가 소형이면서도 광대역의 소리를 낼 수 있는 원리가 무엇인지를 파악하고 이중 음향 발생 장치 제작에 적용할 수 있는 요소를 도출하였다. 매미의 발음기관에서 가장 중요한 부분은 복부 공명실과 진동판이다. 복부 공명실은 위상 반전형 인클로져 시스템으로 모델링 할 수 있으며, 진동판은 돔 형태의 박판으로 볼 수 있다. 근육에서 발생된 입력 신호는 진동판의 곡면에 의해 판에 좌굴을 일으켜 높은 음압의 소리를 발생시킨다. 발생된 소리는 복부를 통해 위상이 반전되어 특정 대역이 강조된다. 진동판의 가장 큰 특징은 곡면구조에 의한 비선형적인 출력이며 이를 통하여 가진 주파수와 상이한 주파수 성분들을 효과적으로 발생시키게 된다. 이러한 구조를 음향 발생장치로 활용하기 위하여 단순한 곡면판의 기하학적 파라미터 변화에 따른 출력 변화 경향을 관찰 하였으며, 이러한 원리를 활용한 음향 발생장치를 구성하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10d
• /
• pp.514-516
• /
• 2002

본 논문은 차량 번호판의 숫자인식 방법으로 위상한정상관을 이용하는 방법을 제안한다. 본 논문에서 이용하는 위상한정상관법은 푸리에변환을 이용한 상관함수의 계산과정에서 진폭을 고정치로 하여 위상정보의 값만으로 패턴 인식을 가능하게 한다. 제안하는 방법은 기존의 위상한정상관에서 진폭을 최적치 2.2로 하여 잡음화상의 식별을 더욱 명확히 하였다. 실험을 통하여 10개의 서로 다른 숫자화상을 비교하여 다른 숫자를 구분하고 잡음이 첨가된 숫자화상을 비교하여 동일 숫자임을 확인함으로써 패턴매칭에 효과적임을 보인다. 또한 화상을 이치화하는 전처리 과정을 거치지 않고도 다른 숫자화상에 대해 98%의 식별성능을 나타내므로 농담화상에 대한 성능도 우수하고 잡음에도 강함을 보여 준다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1656-1657
• /
• 2011

본 논문에서는 RF 프로브를 이용하여 평면 구조물의 RCS(Radar Cross Section)를 감쇄시키기 위한 방법을 제안하였다. 우선적으로, EM 시뮬레이터를 이용하여 제안한 방법에 대한 가능성을 증명한 후 실험을 수행하였다. x-band 에서 $10{\lambda}$의 알루미늄판 위에 FR4 기판을 이용하여 patch 형태로 제작된 RF 프로브를 설치하였으며, 그 후 알루미늄 판으로 입사되는 외부 전자파를 상쇄시키기 위하여 RF 프로브로부터 전자파를 방사하였다. 로테이터를 사용하여 알루미늄판을 phi 방향으로 회전하여 임의의 각도로 입사하는 평면파에 대해서도 반사파의 크기를 측정하였다. RF 프로브로부터 방사된 전자파의 세기와 위상은 신호 발생기와 위상 천이기를 이용하여 조절되었다. 결과적으로 무반향실에서의 실험을 통해, 알루미늄판에 의해 반사되는 전자파를 측정하여 외부 전자파의 상쇄 정도를 확인하였다.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.5
• /
• pp.67-74
• /
• 2007

The unsymmetrically layered artificial material model is consistently introduced to find the optimum topologies of the plate structures. Reissner-Mindlin (RM) plate theory is adopted to formulate the present 9-node plate element considering the first-order shear deformation of the plates. In the topology optimization process, the strain energy to be minimized is employed as the objective function and the initial volume of structures is adopted as the constraint function. In addition, the resizing algorithm based on the optimality criteria is used to update the hole size introduced in the proposed artificial material model. Several numerical examples are rallied out to investigate the performance of the proposed technique. From numerical results, the proposed topology optimization techniques are found to be very effective to produce the optimum topology of plate structures. In particular, the proposed unsymmetric stiffening layer model make it possible to produce more realistic stiffener design of the plate structures.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.1-6
• /
• 2009

We derive the phase error of hologram due to imperfection of a wave plate, the azimuth angle error of a wave plate, and the azimuth angle error of a linear polarizer. Also, we analyze the effect of phase error by the modified triangular interferometer in case of 3-D image reconstruction of hologram.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.1-7
• /
• 2005

We introduced the method to obtain four speckle patterns with relative phase shift of ${\pi}/2$ by the polarizing elements, and calculate the phase at each point of the speckle pattern in shearography using Wollaston prism and polarizing elements. Ant we analyzed the phase error caused by the azimuth angles of wave plates used in the proposed method by Jones matrix.