• Journal of Astronomy and Space Sciences
• /
• v.26 no.2
• /
• pp.229-236
• /
• 2009

KOorea Multi-purpose SATellite(KOMPSAT)-5 will be launched at 550km altitude in 2010. Accurate satellite position(20 cm) and velocity(0.03 cm/s) are required to treat highly precise Synthetic Aperture Radar(SAR) image processing. Ionosphere delay was eliminated using dual frequency GPS data and double differenced GPS measurement removed common clock errors of both GPS satellites and receiver. SAC-C carrier phase data with 0.1 Hz sampling rate was used to achieve precise orbit determination(POD) with ETRI GNSS Precise Orbit Determination(EGPOD) software, which was developed by ETRI. Dynamic model approach was used and satellite's position, velocity, and the coefficients of solar radiation pressure and drag were adjusted once per arc using Batch Least Square Estimator(BLSE) filter. Empirical accelerations for sinusoidal radial, along-track, and cross track terms were also estimated once per revolution for unmodeled dynamics. Additionally piece-wise constant acceleration for cross-track direction was estimated once per arc. The performance of POD was validated by comparing with JPL's Precise Orbit Ephemeris(POE).

• 한국노년학
• /
• v.38 no.2
• /
• pp.351-364
• /
• 2018

The purpose of this study is to learn about the decision factors affecting utilization of elderly welfare center of the elderly living in Gimpo city. The reason of the study is that the elderly welfare center as a provider of general welfare services could not only thinking about the state policy but also need to consider about the inherent role and function of the elderly. Especially for these elders living in rural areas, although the number of elderly welfare centers of the whole country has greatly increased in last 10 years, the effect and function of the facility are almost the same and they are still lack of leisure activities. This issue become a serious problem nowadays. For the above reasons, this article conducts a social survey of 360 elderly people over the age of 65 who lives in the Gimpo city which is a rural-urban type city. The research method is to examine the relationship between the predisposing factors, enabling factors and need factors of Andersen's behavior model with binary logistic regression analysis and the decision tree analysis. The result of binary logistic regression shows the most of factors of Andersen's model is significant. The factors of age, gender, education level in predisposing factors; monthly income in enabling factors and the reserve for old life, the preparation of economic activity for old life in need factors are significant. Then the result of decision tree analysis shows the interaction between factors; when the education level in predisposing factors is higher, the possibility of using of elderly welfare center becomes bigger. Also as the level of healthy promoting preparation in the need factors gets lower, the possibility of using of elderly welfare center still becomes bigger. Although differences were found in the interpretation of the results of regression analysis and decision tree analysis, the results of this study can still provide support for the necessity of elderly welfare centers providing integrated welfare services.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.489-496
• /
• 2019

This paper is a study on the evaluation of loss factor of damping treatment materials to reduce the noise and vibration for panels of railway vehicles and automobiles. In order to determine the modal parameters of damping materials, beam excitation tests were carried out using different type PVC coated aluminum and steel base beam specimens. The specimens were excited from 10 Hz to 1000 Hz frequency range using sinusoidal force, and transfer mobility data were measured by using an accelerometer. The loss factors were determined by using integrated program, based on theories of Half Power Method, Minimum Tangent Error Method, Minimum Angle Error Method and Phase Change Method, which enable to evaluate the parameters using modal circle fit and least squares error method. In the case of lower loss factor and data of linear characteristics, any method could be applied for evaluation of parameters, however the case of higher loss factor or data including non-linear characteristics, the minimum angle error method could reduce the loss factor evaluation. The obtained dynamic properties of the coating material could be used for application of Finite Element Method analyzing the noise control effects of complex structures such as carbody or under-floor boxes of rolling stock. The damping material will be very useful to control the structural noise, because the obtained modal loss factors of each mode show very good effect on over $2^{nd}$ mode frequency range.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.487-495
• /
• 2021

The voltages mainly used in ships are 450 [V], 6.6 [kV], and 11 [kV], and an earthed system is applied to ensure the stability of the power distribution system. In general, low-voltage ships using 450 [V] apply an unearthed system, while high-voltage ships using 6.6 [kV] or 11 [kV] use a high-resistance earthed system. When an earth fault occurs in a ship's power distribution system, the voltage of the healthy phase increases to the line-to-line voltage or higher, which causes an excessive impact on the insulation of the cable. Thus, analyzing this behavior is very important. In this paper, we investigate the characteristics of the line-to-earth voltage variation according to earth faults and a recognition procedure of a faulty phase using the symmetrical coordinate method for a high-resistance earthed system and unearthed system. A mathematical model of the line-to-earth voltage was derived through the symmetric coordinate method, and the ship voltage for simulations was selected as 6.6 [kV] and 450 [V]. A MATLAB simulation proved that this method can determine the highest increase of the line-to-earth voltage, which leads by 120° on the faulty phase, and it accurately judges the faulty phase in both earthed systems.

• Journal of Korean Historical Folklife
• /
• no.45
• /
• pp.291-325
• /
• 2014

This study is about examining the changing process of worshiping heaven in the end of the Koryo dynasty and early Chosun dynasty. For this, it was compared with book of national rites. This paper will outline the differences of commemorative rites of worshiping heaven between Korea and China and its reason for changing process. Also, it shows the understanding of the historic characteristics of commemorative rites of worshiping heaven in the end of the Koryo dynasty and early Chosun dynasty through analyzing conducted religious service. Following methodological approach was used to achieve the aim of the study. The study includes historical changing process and basic ritual of commemorative rites of worshiping heaven from Koryo dynasaty to King Sejo period through various chronicles and books of rites. Understanding the trend transition of operating commemorative rites of worshiping heaven is expressed differently based on the situation in those days even though it is the same operation of commemorative rites of worshiping heaven. The existing study only primarily considered the rites of worshiping heaven in the end of the Koryo dynasty and early Chosun dynasty through the resources within the country. However, the process of settlement of commemorative rites of worshiping heaven is closely related to settlement of Confucian formality. As the problems cannot be solved if institutional changes are researched only though the resources within the nation, this following study also considered the transition of commemorative rites of worshiping heaven in China for sure. Through this approach, the study understood how China's rites of worshiping heaven settled down and formed in Korea and found differences of the rites of worshiping heaven between the two nations by comparing China's book with ornamental "seal" characters throughout many generations. Furthermore, it also illustrated historical characteristics of rites of worshiping heaven in the end of the Koryo dynasty and early Chosun dynasty by analyzing carried out religious service. Although it seems like there are many similarities of Chinese ritual procedure between Koryo dynasty and Chosun dynasty, there are existing significant differences in the context. Moreover, it is clear that there are differences of ritual between Tang, Song, Ming dynasty. These differences are directly connected to Korea and also with transition of king's power. Generally, Tang and Song dynasty show similar trend whilst Ming clarifies the differences between the two. For instance, there are differences between deep bow and superintendent of cho-hun, a-hun, and jong-hun. Transition of configuration is also one of the major differences. Changing of configuration has considerably important meaning refer to status of king's power. Analyzing specific features, such as size of altar, ancestral tablet, people who participate in sacrifices, okpye, configuration, and etc., made possible to consider the actual differences, not just examining different features of vaguely. Based on this foundation, the study closely examined the differences among the periods between the nations and gave the significance of the differences.

• Investigative Magnetic Resonance Imaging
• /
• v.18 no.4
• /
• pp.303-313
• /
• 2014

Purpose : In-vivo conductivity reconstruction using transmit field ($B_1{^+}$) information of MRI was proposed. We assessed the accuracy of conductivity reconstruction in the presence of statistical noise in complex $B_1{^+}$ map and provided a parametric model of the conductivity-to-noise ratio value. Materials and Methods: The $B_1{^+}$ distribution was simulated for a cylindrical phantom model. By adding complex Gaussian noise to the simulated $B_1{^+}$ map, quantitative conductivity estimation error was evaluated. The quantitative evaluation process was repeated over several different parameters such as Larmor frequency, object radius and SNR of $B_1{^+}$ map. A parametric model for the conductivity-to-noise ratio was developed according to these various parameters. Results: According to the simulation results, conductivity estimation is more sensitive to statistical noise in $B_1{^+}$ phase than to noise in $B_1{^+}$ magnitude. The conductivity estimate of the object of interest does not depend on the external object surrounding it. The conductivity-to-noise ratio is proportional to the signal-to-noise ratio of the $B_1{^+}$ map, Larmor frequency, the conductivity value itself and the number of averaged pixels. To estimate accurate conductivity value of the targeted tissue, SNR of $B_1{^+}$ map and adequate filtering size have to be taken into account for conductivity reconstruction process. In addition, the simulation result was verified at 3T conventional MRI scanner. Conclusion: Through all these relationships, quantitative conductivity estimation error due to statistical noise in $B_1{^+}$ map is modeled. By using this model, further issues regarding filtering and reconstruction algorithms can be investigated for MREPT.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.1
• /
• pp.39-46
• /
• 2021

The quantitative measurement of interfacial adhesion energy (Gc) of multilayer thin films for Cu interconnects was investigated using a double cantilever beam (DCB) and 4-point bending (4-PB) test. In the case of a sample with Ta diffusion barrier applied, all Gc values measured by the DCB and 4-PB tests were higher than 5 J/㎡, which is the minimum criterion for Cu/low-k integration without delamination. However, in the case of the Ta/Cu sample, measured Gc value of the DCB test was lower than 5 J/㎡. All Gc values measured by the 4-PB test were higher than those of the DCB test. Measured Gc values increase with increasing phase angle, that is, 4-PB test higher than DCB test due to increasing plastic energy dissipation and roughness-related shielding effects, which matches well interfacial fracture mechanics theory. As a result of the 4-PB test, Ta/Cu and Cu/Ta interfaces measured Gc values were higher than 5 J/㎡, suggesting that Ta is considered to be applicable as a diffusion barrier and a capping layer for Cu interconnects. The 4-PB test method is recommended for quantitative adhesion energy measurement of the Cu interconnect interface because the thermal stress due to the difference in coefficient of thermal expansion and the delamination due to chemical mechanical polishing have a large effect of the mixing mode including shear stress.

• Journal of Technology Innovation
• /
• v.22 no.4
• /
• pp.235-259
• /
• 2014

New product or new technology developments are directly linked to a firm's survival and thus their performance and improvement are gaining attention in the midst of rapidly changing business environment and aggravating competition. However, despite SMEs' significance in the national economy, they are limited in terms of size and resources in possession, so the government provides a variety of supports as a policy. According to a study on the organizational life cycle, a firm's limits and difficulties differ by growth stage, so the supports need to be tailored. Based on the data from 2,575 firms that responded to the "2011 SMEs Technological Statistics," how technological capability level and deviation in the R&D process affect the R&D sales performance was studied. The result of analysis revealed that the technological capability has a positive impact on the R&D sales performance. It was also learned that the relationship between deviation in the technological capability and R&D sales performance was moderated by the government support. For the hypothesis that the government support would have a different moderating effect by growth stage for the impact the technology level has on the R&D sales performance, the empirical analysis showed a different meaningful moderating effect for each growth stage. The theoretical implications of the study are that, instead of a simple relation of dynamics that does not take the growth stages into account, it suggested a more realistic causal relationship model that reflects the complex environment the SMEs are in and that the need for measuring and using the deviation in technological capability as a research variable has been justified. The practical implications are that the government policy for supports can be tailored to a growth stage and that the guidelines have been suggested to effectively use the government funding by encouraging the SMEs in a different growth stage to adapt to the customized policy.

• (The)Study of the Eastern Classic
• /
• no.37
• /
• pp.377-410
• /
• 2009

In the East Asian Confucianism society, Hakmun was aimed to bring human beings and nature into harmony, and to explore a unity between knowledge and conducts. For example, Neo-Confucianism aspired they could explain the human existence and society through a single concept of Iki(理氣, the basic principles and the atmospheric force of nature). In this philosophy, humanics and natural sciences had not been differentiated at all. The East-West cultural interchanges at the beginning of modernity caused a crack in the traditional academic concepts. Through the Hundred Days of Reform(變法自疆運動, a movement of Strenuous Efforts through Reforming the Law), the Western Affairs Movement(洋務運動) in China, Meiji Restoration(明治維新) in Japan, or Innovation Movements(開化運動) and the Patriotic Enlightenment Movement(愛國啓蒙運動) in Korea, the traditional meanings of Hakmun was degraded while it became a target of the criticism of the enlightenment movements. Accordingly, East Asians' perception of Hakmun rapidly began to change. Although there had been the Silhak(實學, practical science) movement in Korea, which tried to differentiate its conceptualization of Hakmun from that of Neo-Confucianism during the 18th and 19th century, the fundamental shift in meaning occurred with the influx of the modern Western culture. This change converted the ultimate objective of Hakmun as well as its methods and substances. The separation of humanics and natural sciences, rise in dignity of the technological sciences, and subdivision of learning into disciplines and their specialization were accelerated during the Korean enlightenment period. The inflow of the modern western science, humanized thought, and empiricism functioned as mediators in these phase and they caused an irreversible crack in the traditional academic thoughts. Confronting the western mode of knowledge, however, the East Asian intellectuals had to explain their new learning by using traditional terms and concepts; modification was unavoidable when they tried to explain the newly imported knowledge and concepts. This presentation focuses on the traditional concepts of 'gyeogchi'(格致, extending knowledge by investigating things) and 'gungni'(窮理, investigation of principles), pervasively used in philosophy, physics and many other fields of study. These concepts will mark the key point with which to trace changes of knowledge and to understand the way how the concept of Hakmun was converted into a modern one.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.305-312
• /
• 2014

Purpose : The purpose of this study is to analyze the mechanical and leaf speed accuracy of the dynamic multileaf collimator (DMLC) and determine the appropriate period of quality assurance (QA). Materials and Methods : The quality assurance of the DMLC equipped with Millennium 120 leaves has been performed total 92 times from January 2012 to June 2014. The the accuracy of leaf position and isocenter coincidence for MLC were checked using the graph paper and Gafchromic EBT film, respectively. The stability of leaf speed was verified using a test file requiring the leaves to reach maximum leaf speed during the gantry rotation. At the end of every leaf speed QA, dynamic dynalog files created by MLC controller were analyzed using dynalog file viewer software. This file concludes the information about the planned versus actual position for all leaves and provides error RMS (root-mean square) for individual leaf deviations and error histogram for all leaf deviations. In this study, the data obtained from the leaf speed QA were used to screen the performance degradation of leaf speed and determine the need for motor replacement. Results : The leaf position accuracy and isocenteric coincidence of MLC was observed within a tolerance range recommanded from TG-142 reports. Total number of motor replacement were 56 motors over whole QA period. For all motors replaced from QA, gradually increased patterns of error RMS values were much more than suddenly increased patterns of error RMS values. Average error RMS values of gradually and suddenly increased patterns were 0.298 cm and 0.273 cm, respectively. However, The average error RMS values were within 0.35 cm recommended by the vendor, motors were replaced according to the criteria of no counts with misplacement > 1 cm. On average, motor replacement for gradually increased patterns of error RMS values 22 days. 28 motors were replaced regardless of the leaf speed QA. Conclusion : This study performed the periodic MLC QA for analyzing the mechanical and leaf speed accuracy of the dynamic multileaf collimator (DMLC). The leaf position accuracy and isocenteric coincidence showed whthin of MLC evaluation is observed within the tolerance value recommanded by TG-142 report. Based on the result obtained from leaf speed QA, we have concluded that QA protocol of leaf speed for DMLC was performed at least bimonthly in order to screen the performance of leaf speed. The periodic QA protocol can help to ensure for delivering accurate IMRT treatment to patients maintaining the performance of leaf speed.