• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.73-79
• /
• 2000

The part-surface of mold or stamping-dies consists of a compound surface which consists of lots of composite surfaces, and may have various types of feature shapes including convex sharp edge (CSE). Those CSE features should be considered with care in machining the surface, which necessitates extraction of CSE curves on a compound surface. This work can be done rather easily for a solid model which has a complete topology information. In case of the compound surface without topology information, however, such CSE curves must be gathered through some geometrical calculations paying much computation time. In the paper, extracting CSE curves by the construction of a CSE region-map which can reduce time, and detecting various common edge types are presented.

• Journal of the Korea Computer Graphics Society
• /
• v.11 no.2
• /
• pp.40-46
• /
• 2005

본 논문에서는 스윕곡면(sweep surface)을 기반으로 복잡한 3차원 물체의 형상을 변형하는 새로운 자유형상 변형(free-form deformation)기법을 제시한다. 본 논문에서 제시한 방법은 기존의 격자점(control lattices)을 조정하는 체적기반의 방법에 비해 스윕기반의 절차적 (procedural) 모델링 기법의 직관성을 활용하여 사용자에게 보다 효율적인 형상변형 기법을 제공한다. 3차원 물체의 정점들은 스윕곡면의 단면(cross-section)에 바인딩(binding) 되어 곡면의 변화에 따라 형상변형을 한다. 본 논문에서 제시한 스윕기반 형상변형 기법은 3차원 물체를 부분적으로 변형하는 기법과 계층구조를 기반으로 전반적인 형상을 변형하는 기법으로 구분된다. 부분적인 형상변형 기법은 스윕곡면을 구성하는 성분의 다단계(multi-level) 표현을 통하여 사용자에게 다중해상도(multi-resolution) 형상변형 기능을 제공한다. 계층구조에 기반한 형상변형 기법은 복잡한 3차원 물체를 위상구조에 따라 여러 계층으로 분할하고, 각 부분의 형상을 근사하는 스윕곡면들을 생성한다. 분할된 각 부분의 정점(vertices)들은 해당 스윕곡면에 바인딩 되어 스윕곡면의 단면의 변화를 따르게 된다. 이러한 상황하에서 스윕곡면들은 3차원 물체의 계층구조에 따라서 서로 상호작용(interaction)을 하게 되고, 결과적으로 3차원 물체의 각부분은 상호반응적 형상변형을 한다. 이러한 계층구조에 기반한 상호반응적 형상변형 기법은 사용자의 의도에 부합하는 보다 사실적이고 기능적인 형상변형을 가능하게 한다. 본 논문에서는 다양한 3차원 물체에 대한 실험을 통해 제시된 방법의 효율성을 입증한다. 결과 막성 사구체병증과 같은 신질환이 발견될 수 있으므로 신조직검사의 적응증에 합당한 경우 적극적인 신조직검사를 시행하여 원인 질환을 찾는 노력이 필요할 것으로 사료된다.. 남아가 75명으로 남녀비는 3.6:1을 보였다. 임상병리학적 분류상 일차성 신증후군이 89명(92.7%), 이차성 신증후군이 7명(7.3%)이었으며 일차성 신증후군에서 minimal change nephrotic syndrome이 71명으로 79.8%, focal segmental glomerulosclerosis 11.2%, mesangial proliferation 4.5%, membranoprolifrative glomeulonephritis 3.4%, membranous nephropathy 1명 1.1%이었으며 2차성 신증후군은 $Henoch-Sch\"{o}nlein$ nephritis가 3례로 가장 많았다. 미세변화 신증후군 71명 중 비재발군이 16명으로 22.5%, 비빈발 재발군 49.3%, 빈발 재발군 18.3%, 스테로이드 의존군 9.9%를 보였다. 결론 : 대전시에서의 신증후군 환아의 발생빈도는 15세이하 소아 10만명당 약 5명으로 추정되었으며 10여 년전과 비교하여 큰 변화를 보이지는 않았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이를 보이지 않음을 알 수 있었다. 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.33-42
• /
• 2002

A method of automatic 3D tunnel modeling is proposed. The proposed method used the parametric representation of geometry and a hierarchical and relational data structure. These two bases provide the generalization and extension for 3D tunnel modeling. Especially, these two fundamentals ion the basis iota representing the characteristics of the tunnel structure for analysis. The constant-curvature characteristic is exploited to generate 3D mesh on the tunnel surface. This is attributed to the advantage that any 2D automatic mesh generation algorithm can be applied to 3D mesh modeling.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.937-950
• /
• 2015

Microstrip reflectarray is an antenna which controls its radiation pattern with a number of reflective elements. Conventionally, the reflectarray has been researched to replace curved reflector antennas. In this paper, design theories of reflectarray is briefly introduced, and research trends of high gain and broadband reflectarrays are reviewed. To improve the gain of the reflectarrays, it is required that the reflection phase errors on the reflectarray surface be minimized. For this purpose, sufficiently wide reflection phase range and low phase sensitivity should be realized with the designed element. For bandwidth improvement, the reflection phase of the element should be linear with the frequency variation. In this paper, various researches to improve the reflection phase characteristics of the element for high gain and broadband reflectarrays, such as multi-layer and single-layer multi-resonant structures, are reviewed. Also, dual-reflectarray configuration for compact antenna design is reviewed. Finally, various applications of reflectarrays such as contoured beam, near-field focusing, and RCS reduction are reviewed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.366-373
• /
• 2013

This paper discusses the singly curved phased reflector for reduced RCS pattern, which has minimized RCS level at boresight with a null by phase cancelation and the lowered RCS level of main beam by splitting the main beam into multi directions. Considering the reduced level of boresight and main beam compared to the same sized reference PEC, this proposed multi-beam reflector can be adopted in the mono-static radar and the bi-static radar environment. The proposed reflector is a multi-beam reflector, which has different phase distributions at each row for different steering angle. It is designed through an intermediate stage of a single and dual-beam reflector. The behaviors of the designed reflectors are verified through full-wave simulation and experiment. The reflectors are designed in the frequency of 10 GHz and it has a size $240{\times}180mm^2$($8{\times}6\;{\lambda}^2$) with the curvature k=3.3. From the measured results, the proposed reflectors reduce the reflected power by 17 dB at boresight.

• Journal of Biomedical Engineering Research
• /
• v.23 no.5
• /
• pp.351-364
• /
• 2002

Conventional 3D ultrasound imaging using mechanical ID arrays suffers from poor elevation resolution due to the limited depth-of-focus (DOF). On the other hand, 3D imaging systems using 2D phased arrays have a large number of active channels and hence require a very expensive and bulky beamforming hardware. To overcome these limitations, a new real-time volumetric imaging method using curved 2-D arrays is presented, in which a small subaperture, consisting of 256 elements, moves across the array surface to scan a volume of interest. For this purpose, a 2-D curved array is designed which consists of 90$\times$46 elements with 1.5λ inter-element spacing and has the same view angles along both the lateral and elevation directions as those of a commercial mechanical 1-D array. In the proposed method, transmit and receive subapertures are constructed by cutting the four corners of a rectangular aperture to obtain a required image qualify with a small number of active channels. In addition the receive subaperture size is increased by using a sparse array scheme that uses every other elements in both directions. To suppress the grating lobes elevated due to the increase in clement spacing, fold-over array scheme is adopted in transmit, which doubles the effective size of a transmit aperture in each direction. Computer simulation results show that the proposed method can provide almost the same and greatly improved resolutions in the lateral and elevation directions, respectively compared with the conventional 3D imaging with a mechanical 1-D array.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.10
• /
• pp.987-995
• /
• 2009

As an experimental technique to analyze the far-field characteristics of underwater cylindrical array sensors, cylindrical acoustic holography is studied. Inside an laboratory water tank, far-field directivity patterns as well as near-field source images are reconstructed from the measured hologram by hydrophone array. Approximate equation for far-field directivity estimation is derived based on stationary phase method. The simulation and experiment show well usefulness of the proposed method in application of underwater array sensors.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.111-116
• /
• 2009

As an experimental technique to analyze the far-field characteristics of underwater cylindrical array sensors, cylindrical acoustic holography is studied. Inside an laboratory water tank, far-field directivity patterns as well as near-field source images are reconstructed from the measured hologram by hydrophone array. Approximate equation for far-field directivity estimation is derived based on stationary phase method. The simulation and experiment show well usefulness of the proposed method in application of underwater array sensors.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.196-203
• /
• 2015

In order to apply cylindrical periodic array to phased array antenna or frequency selective surface, efficient electromagnetic analysis is required. Finite periodic array is applied in real situation. But, generally, assumed that periodic structure is arranged infinitely, approximate electromagnetic characteristics can be obtained efficiently. But, difference of characteristics between real structure and approximate structure occurs because finite periodic array is approximated to infinite periodic array. Therefore, comparison and analysis of cylindrical infinite array and finite array are required. In this paper, cylindrical infinite periodic array are analyzed using cylindrical Floquet harmonics. Also, cylindrical finite periodic array is analyzed using method of moments (MoM) with thin wire approximation because periodic structures which are composed of strip with narrow width are analyzed. Transmission characteristics and surface currents of infinite and finite periodic structures are compared.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.626-631
• /
• 2020

In this paper, a study on beam synthesis technique of conformal array was performed. It is applied to various radar systems that can perform beam steering without deterioration of performance due to beam steering in a general linear arrangement. Unlike the beam synthesis technique in the planar linear array, the conformal array has a radiation element located on a curved surface, so it is necessary to compensate for a difference in length from the radaation element to the wave front surface. In addition, by calculating the offset angle for each radiation element and applying it during actual synthesis, it was possible to predict an accurate beam pattern. In this paper, length compensation and offset angle were calculated and applied to beam pattern synthesis to perform beam pattern comparison, and performance was compared through mathematical analysis.