• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.40-45
• /
• 2013

The purpose of this study was to detect the pin hole defect of dental composite restoration using lock-in thermography method. Amplitude and phase images of the composite resin specimens were analyzed according to the lock-in frequency and the diameter of defect area. Through the amplitude image analysis, at lock-in frequency of 0.05 Hz, defect diameters 2-5 mm exhibited the highest amplitude contrast value between defective area and sound area. The lock-in frequency range of 0.3-0.5 Hz provided good phase angle contrast for the defect area. At lock-in frequency range of 0.5 Hz, defect diameter of 5 mm exhibited the highest phase contrast value. It is concluded that the infrared lock-in thermography method verified the effectiveness for detecting the pin hole defect of dental composite restoration.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.4
• /
• pp.178-182
• /
• 2008

In measurements of the vibration of structures underwater with a laser Doppler vibrometer, the surface vibration is measured by means of detecting the phase change of the laser beam due to the structural vibration. The laser beam passes through the sound field radiated from the vibrating structures underwater. It experiences an additional phase change due to the change in refractive index in the radiated sound field. This phase change due to the sound field may cause the error in surface vibration measurements. In this paper, this phase change due to the radiated sound filed has been analyzed. The numerical simulation has been peformed to evaluate the phase change in sound field radiated from an infinite cylindrical structure vibrating underwater.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.3
• /
• pp.193-199
• /
• 2015

Active thermography techniques have the capability of inspecting a broad range simultaneously. By evaluating the phase difference between the defected area and the healthy area, the technique indicates the qualitative location and size of the defect. Previously, the development of the defect detection method used a variety of materials and the test specimen was done. In this study, the proposed technique of lock-in is verified with artificial specimens that have different size and depth of subsurface defects. Finally, the defect detection capability was evaluated using comparisons of the phase image and the amplitude image according to the size and depth of defects.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.67-73
• /
• 2005

The thickness of a Si3N4 thin film with a 100m nominal thickness was measured by use of a Mach-Zehnder interferometer. The map of the phase-delay through the thin film was obtained by an interframe intensity-correlation-matrix method that could elliminate phase-shifting errors. After the spatial phase-shifting errors were treated with a least-squares method, the reference to surface of the phase map was estimated. The overall accuracy of the method was found to be 5nm.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.6
• /
• pp.45-52
• /
• 1990

본 논문에서는 원하는 방향에 대해서 선형 위상 응답 특성을 갖는 적응 빔 형성기에 대해서 설 명한다. 본 논문에서는 제안하는 빔 형성기는 원하는 신호에 대해서 선형 위상 응답 특성을 얻기 위해 전방 적응 빔 형성기와 후방 적응 빔 형성기를 이용한다. 두 빔 형성기의 각각의 출력 신호를 합하여 원하는 신호를 얻는다. TDL 필터 계수는 가상신호와 출력 신호간의 차이 값의 파워가 최소가 되도록 조정된다. 원하는 방향에 대한 빔 형성기의 임펄스 응답이 중심 샘플에 대해서 대칭이 되도록 원하는 방향에서 입사되는 신호에 대한 선형 위상 응답 특성을 얻을 수 있다. 출력 잡음 분산을 최소로 하는 반면 원하는 신호 방향에 대한 주파수 응답의 왜곡을 미리 정한 허용치보다 작게 함으로써 음성 신호 를 향상시키는 AMNOR 시스템에 본 논문에서 제안한 빔 형성기를 적용하여 컴퓨터 시뮬레이션 결과 를 제시한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.2
• /
• pp.157-164
• /
• 2011

This work is devoted to the technique application of lock-in infrared Thermography in the shipbuilding and ocean engineering industry. For this purpose, an exploratory study to find the optimized test conditions is carried out by the design of experiments. It has been confirmed to be useful method that the phase contrast images were quantified by a reference image and weighted by defect hole size. Illuminated optical intensity of lower or medium strength give a good result for getting a phase contrast image. In order to get a good phase contrast image, lock-in frequency factors should be high in proportion to the illuminated optical intensity. The integration time of infrared camera should have been inversely proportional to the optical intensity. The other hand, the difference of specimen materials gave a slightly biased results not being discriminative reasoning.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.373-379
• /
• 2010

EMAT has been applied in various fields for flaw detection and material characterization because it has noncontact property in wave generation and a good mode selectivity. Unfortunately, however, EMAT shows low signal to noise ratio relative to commercial contact transducer because of low energy conversion efficiency. If the phase matching through the control of time delay between each coil consisting of the array EMAT is accomplished, it is expected that it will be a solution for the improvement of low signal to noise ratio. In this experiment, the phased array EMATs which consists of 3 or 4 meander coils and one big magnet were fabricated for surface and vertical shear wave generation. Effect of phased delay control on signal directivity and amplitude enhancement was verified. A slit with the depth of 0.5 mm and a side-drill hole of 0.5 mm diameter were clearly detected by fabricated phased array EMATs, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.166-173
• /
• 2022

In this paper, the performance of joint equalizer and phase-locked loop in underwater communications is analyzed. In the channel where the Doppler frequency exists, it is difficult to recover the transmitted data only by the equalizer. To compensate for the Doppler frequency, the phase-locked loop is used. For removing the time-varying multipath and the Doppler frequency simultaneously, the equalizer and the phase-locked loop operate jointly. Also, if the initial Doppler frequency error obtained by Fast Fourier Transform (FFT) is compensated, the convergence speed of the joint equalizer and phase-locked loop can be improved. To verify the performance, lake and sea experiments were conducted. As a result, it was showed that the joint equalizer and phase-locked loop converges sufficiently in the preamble (known data) period regardless of whether the Doppler frequency is compensated or not. And, the bit error in random data period is not occurred. However, we can increase the convergence speed of the equalizer more than twice through the compensation of Doppler frequency.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.8
• /
• pp.103-109
• /
• 1998

디지털신호의 변조에는 기본적으로 진폭 편이 변조(ASK: Amplitude-Shift Keying), 주파수 편이 변조(FSK: Frequency-Shift Keying), 위상 편이 변조(PSK: Phase-Shift Keying) 등의 세 가지 방법이 있다. 본 논문에서는 표본클록 합성계수 방식에 관한 이론을 고찰하고, 클록초기치 누적방식의 DDFS를 이용하여 위에서 언급한 변조방법을 실현할 수 있는 주파수 도약 대역 확산 통신에 적합한 변조기를 구현하였다. 또한, 합성된 출력주파수 의 정현파형에 대한 스펙트럼 분석과 PN(Pseudo Noise) 부호를 사용한 순시적인 주파수 도 약 상태, 위상제어의 가능성 등을 확인한 결과 실험으로부터 다음과 같은 결과를 얻었다. 첫 째, 합성된 출력주파수는 주파수 Index에 따라 기준주파수에 정확히 정수배가 되며, 둘째, 합성된 정현파형의 스펙트럼으로 기본파와 여러 고조파의 크기를 비교하여 본 결과 50[dB] 이상의 차이가 남으로서 고조파 성분들이 상당히 감소되었음을 확인하였고, 셋째, PN 코드 를 사용하여 순시적인 주파수 도약 상태를 확인하여 본 결과 스위칭 시간이 빠르기 때문에 주파수 도약 특성이 뛰어남을 알 수 있었으며 또한, 누산기의 set/reset 상태를 변화시킴에 따라 위상이 제어됨을 입증하였다.

• Journal of the Korean Society of Earth Science Education
• /
• v.9 no.3
• /
• pp.323-340
• /
• 2016

The purpose of this study is to investigate the effect of observing material on the phase change of moon considering the orbits of earth and moon for elementary school students. For this study, the material which shows the orbit of moon tilted at $5^{\circ}$ with the orbit of earth is developed. 110 6th grade students in an elementary school are sampled. They are divided into the experimental group and the control group. The lessons using the material developed in this study are implemented to the experimental group, and the lessons using the material proposed in ordinary textbook are implemented to the control group. The pre, post, delayed concept tests on the phase change of moon are administered to the students of the experimental group and the control group, and semi-structured interviews are conducted for each concept level. According to students' responses, the concept levels are divided into 'Phase recognition', 'Space viewpoint', 'Earth viewpoint', and 'No recognition'. The experimental group and the control group are homogeneous in the pre-test. The result of this study shows that the experimental group gains significantly more scores than the control group in the post and delayed tests. Also, in the post and delayed tests, more students of the experimental group are in the highest level 'Phase recognition' than the control group. Finally, students of the experimental group who were in the 'Phase recognition' and 'Space viewpoint' explain more scientifically than the students of the control group. Therefore the results of this study show that the observing material on the phase change of moon considering the orbits of earth and moon is effective.