• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.104-104
• /
• 2016

음극아크증착과 스퍼터링을 동시에 사용한 하이브리드 공정으로 제조된 TiAlSiN 코팅층의 물성을 평가하였다. TiAlSiN 코팅층은 음극아크 소스에 Ti-Al 타겟을 장착하고 스퍼터링 소스에는 Si 타겟을 장착하여 아르곤과 질소 가스의 혼합가스 분위기에서 스테인리스(SUS304)와 초경(cemented carbide; WC-15wt.%Co) 기판 위에 제조되었다. 음극아크 소스에 인가되는 전류는 고정하고 스퍼터링 소스에 인가되는 전력을 조절하여 TiAlSiN 코팅층의 Si 함량을 제어하였다. TiAlSiN 코팅층의 Si 함량이 증가하면 코팅층의 구조가 주상정에서 비정질 구조로 변화한다. 이는 Si 함량이 증가하면 코팅층에 형성되는 알갱이 구조의 크기가 줄어들기 때문이다. X-선 회절 결과와 Scherrer's equation을 이용하여 Si 함량에 따른 알갱이 구조의 크기를 계산하면 Si이 없는 코팅층은 약 14 nm의 크기를 보이며 8 at.% 이상의 함량에서 약 2.5 nm로 포화된다. TiAlSiN 코팅층의 경도를 Si 함량에 따라 측정하면 Si 함량이 증가하면 경도도 증가하는 경향을 보이며 약 9 at.%의 Si 함량에서 3200 Hv로 최대가 되고 이후에는 감소한다. TiAlSiN이 코팅된 스테인리스 시편을 대기에서 열처리하고 시편 무게증가를 측정하여 코팅층의 내열성을 평가하였다. Si 함량이 증가하면 내열성도 향상되는데 14.4 at.%의 Si 함량에서 $700^{\circ}C$까지 무게 증가가 없으며 $900^{\circ}C$까지 0.43 mg의 증가를 보인다. 본 실험을 통해서 얻어진 TiAlSiN 코팅층은 비교적 높은 경도와 내열성을 확보하여 절상공구 보호막 코팅 소재 등으로 활용이 가능할 것으로 판단된다.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.421-426
• /
• 2012

The effect of synthesis conditions such as various organic material and composition of organic-inorganic material in ozone resistance and surface characteristic of ultraviolet cured organic-inorganic hybrid coating film has been investigated. Organic-inorganic hybrid coating solution was prepared using tetraethoxysilane (TEOS), silane coupling agent methacryloyloxypropyltrimethoxysilane (MPTMS), 2,2,2-trifluoroethylmethacrylate, and various organic materials with acrylate group, bar-coated on substrates using applicator and densified by UV-curing. It was found that ozone resistance and surface hardness of the coating film was increased with contents of TEOS. It was also found that ozone resistance of coating film was increased with contents of 2,2,2-trifluoroethylmethacrylate. On the other hand, surface hardness was decreased with increase of 2,2,2-trifluoroethylmethacrylate. In addition, Surface hardness of coating film was increased with the addition of aliphatic urethane acrylate. It was also found that the transmittance of coating films was not influenced by content of TEOS and 2,2,2-trifluoroethylmethacrylate. In addition, the coating film exhibited high transmittance of above 90%.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.14-14
• /
• 2003

Silicon carbide (SiC)는 높은 power 영역과 높은 온도영역에서도 작동 가능한 우수한 반도체 물질이다. 또한 우수한 열적 화학적, 안정성을 가지고 있어 가흑한 조건에서의 소자로써도 사용 가능하다. 현재 SiC 적용분야로는 우수한 전기적, 기계적 성질을 이용한 미세소자(MEMS)와 GaN 와 거의 유사한 격자상수를 가지는 것을 이용한 GaN epitaxial 성장의 기판으로도 사용되어진다. 그러나 SiC 는 기존의 습식식각 용매에 대해 화학적 안정성을 가지고 있기 때문에 전자소자의 제작에 있어서 플라즈마를 이용한 건식식각의 중요성이 대두되어지고 있다. 소자제작에 있어 이러한 건식식각시 식각 단면의 제어, 이온에 의한 낮은 손상 정도, 매끄러운 식각 표면, 그리고 고속의 식각 속도둥이 요구되어진다. 본 실험에서는 식각 속도의 증가와 수직한 식각 단면둥을 획득하기 위하여 SF6 플라즈마에서 Source power, dc bias voltage, 그리고 외부에서 인가되는 자속의 세기를 변화시쳐가며 식각 속도, 식각 마스크와의 식각 션택비, 식각 단면둥과 같은 SiC 의 식각 특성을 관찰하였다. 식각 후 식각 단면은 주사전자 현미경(SEM)을 통해 관찰하였다. 본 실험에서의 가장 높은 식각 속도는 분당 1850n 로써 이때의 공정조건은 1400W 의 inductive power, -600V 의 dc bias voltage, 20G 의 외부자속 세기이었다. 또한, 높은 inductive power 조건과 낮은 dc bias voltage 조건에서 Cu는 $SF_6$ 플라즈마 내에서 식각부산물의 증착으로 인해 SiC 와 무한대의 식각선택비를 보였다. 이러한 Cu 마스크를 사용한 SiC 의 식각에서는 식각 후 수직한 식각 단변을 관찰할 수 있었다. 것올 알 수 있다. 따라서, 기존의 pve 보다 세라믹 기판의 경우가 수분 흡수율이 높아 더 오랫동안 전류를 흐르게 하여 방식성이 개선된 것으로 판단된다.을 통해 경도가 증가한 시편의 경우 석출상의 크기가 5nm 이하로 매우 작고 대체로 기지와 연속적인 계면을 형성하나, 열처리가 진행될수록 석 출상의 크기가 커지고 임계크기 이상에 이르면 연속적인 계면은 거의 발견되지 않고, 대부 분 불연속적이고 확연한 계면을 형성함을 관찰 할 수 있었다. 알루미나(${\alpha}-Al_2O_3$) 기판 위에 증착한 $(Ti_{1-x}AI_{x})N$ 피막은 마찬가지로 (200) 우선 방위를 나타내었으나, 그 입자의 크기가 수십 nm로 고속도강위에 증착한 피막에 비해 상당히 크게 형성되었다. 또한 열처리 후에 AIN의 석출이 진행됨에도 불구하고 경도 증가는 나타나지 않고, 열처리가 진행됨에 따라 경도가 감소하는 양상만을 나타내었다. 결국 $(Ti_{1-x}AI_{x})N$ 피막이 열처리 전후에 보아는 기계적 특성의 변화 양상은 열역학적으로 안정한 Wurzite-AlN의 석출에 따른 것으로 AlN 석출상의 크기에 의존하며, 또한 이러한 영향은 $(Ti_{1-x}AI_{x})N$ 피막에 존재하는 AI의 함량이 높고, 초기에 증착된 막의 업자 크기가 작을 수록 클 것으로 여겨진다. 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로 $\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.1
• /
• pp.56-61
• /
• 2021

This study was conducted to determine the possibility of estimating the daily mean temperature for a specific location based on the climatic data collected from the nearby Automated Synoptic Observing System (ASOS) and Automated Weather System(AWS) to improve the accuracy of the climate data in forage yield prediction model. To perform this study, the annual mean temperature and monthly mean temperature were checked for normality, correlation with location information (Longitude, Latitude, and Altitude) and multiple regression analysis, respectively. The altitude was found to have a continuous effect on the annual mean temperature and the monthly mean temperature, while the latitude was found to have an effect on the monthly mean temperature excluding June. Longitude affected monthly mean temperature in June, July, August, September, October, and November. Based on the above results and years of experience with climate-related research, the daily mean temperature estimation was determined to be possible using longitude, latitude, and altitude. In this study, it is possible to estimate the daily mean temperature using climate data from all over the country, but in order to improve the accuracy of daily mean temperature, climatic data needs to applied to each city and province.

• Journal of Life Science
• /
• v.17 no.9 s.89
• /
• pp.1272-1277
• /
• 2007

Comparison of fruit bodies of Pleurotus ostreatus cultivar chunchu No .2 grown on the sawdust, rice straw and cotton waste substrates revealed differences in the pattern of differentiation of hyphal compartments. Required period for primordium induction of fruit bodies grown on sawdust substrate was 13 days. Physical structure shown as hardness of stipes grown on the sawdust substrate, fruit bodies were harden than control. Pileocystidia were well developed on the surface of pileus in the fruit body cultivated on rice straw. Microstructures of fruit body grown on the sawdust and cotton wastes substrates shown fast-discharge of basidiospore and sytoms ageing. Hyphae of fruit bodies formed on sawdust substrate had less stainable cytoplasmic material and many more vacuoles than hyphae of fruit bodies formed on synthetic substrate with 50% of pine sawdust, 30% of cotton seed hull and 20 of beet pulp(control).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.9
• /
• pp.1294-1300
• /
• 2012

To investigate the effects of oyster mushroom on the quality of Sulgidduk and Gyeongdan, freeze-dried mushroom power and mushroom extract were prepared. Dough for Gyeongdan was held for 0~6 hours at room temperature before cooking in order to allow for enzyme reaction. Upon addition of 2~5% mushroom power or 1~2% mushroom extract, the hardness of Sulgidduk decreased while the storage periods could be extended 1~2 days. Avrami rate constant (k) was 0.0111 for 2% power-added rice cake and 0.044 for the control. In Gyeongdan, hardness also decreased by addition of mushroom. Avrami rate constant (k) was 0.0178 for 10% mushroom power-added Gyeongdan and 0.0652 for the control. In a sensory test, Sulgidduk with 1% mushroom powder showed the highest score. Overall, addition of 1% mushroom powder to rice was appropriate for Sulgidduk. For Gyeongdan, addition of 1~2% mushroom powder was appropriate.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.681-690
• /
• 2000

For scientification of commercial fermented radish products the study on physicochemical and processing properties of various radish cultivars should be proceeded and needed. Moisture contents of 3 parts of root ranged from 91.3 to 94.0%. Although, the upper part showed less content of moisture and ash than other parts, the upper part contained higher amount of crude protein and soluble solids. The sugar contents of Baekkwang grown on spring was the lowest$(5.0^{\circ}Brix)$ and that of Taebaek grown on autumn was the highest $(6.6^{\circ}Brix)$ among 6 cultivars. Significant difference of acidity was shown in various cultivars but not in each parts. The most abundant soluble sugars in radish root was glucose ranging from 15.8 to $27.3\;{\mu}mole/g\;f.w.$ fresh weight, f.w. and followed by fructose ranging from 16.4 to $23.1\;{\mu}mole/g\;f.w.$ However, the content of sucrose ranging from 0.7 to $2.7\;{\mu}mole/g\;f.w.$ was the lowest compared to others. Hardness of fresh root was the highest in Taebaek $[93.4{\sim}156.9N/m^2(\times10^3)]$, followed by Dongja and Chudong, and the lowest in Baekkwang. Changes in rigidity of roots during brining were determined. Although the rigidity was drastically reduced during initial 60 min., it was reversely increased during further storage. Sensory acceptabilities of Taebaek and Dongja were the best among 7 cultivars. Optimal time of radish fermentation at pH of 4.2 and acidity of 0.6% was between 24 and 28 days of storage.

• Korean Journal of Materials Research
• /
• v.10 no.11
• /
• pp.760-769
• /
• 2000

Mechanical properties of HSLA cast steels alloyed with 0.15% Nb, Ti or V were tested as variations of austenizing temperatures and tempering times. The test results are as follows. The hardness of HSLA cast steels austenized for 2hrs at 115$0^{\circ}C$ was shown the highest value regardless of alloying elements and then decreased as the temperature decreased below 110$0^{\circ}C$. The hardness of HSLA cast steels with 0.15% Ti austenized for 2 hrs at $1150^{\circ}C$ was higher than that of any other HSLA cast steels, and chich was mainly attributed to the relatively high amount of bainite, and solid solution hardening. Charpy impact energy of HSLA cast steels was comparable to the C-Mn cast steel except HSLA cast steels with 0.15% Ti austenized at 115$0^{\circ}C$. The hardness of HSLA cast steels austenized for 2 hrs at $1150^{\circ}C$ increased at a ten-minute tempering, and after that, the hardness kept almost sililar level except HSLA cast steels with 0.15% V.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.5 no.1
• /
• pp.194-200
• /
• 1994

When children exhibit unusually intense or persistent sexual interests or behavior, this is an indication that they have been exposed to more than the expectable amount of sexual experience, Although sexualized behavior and/or statement is a symptom of sexual abuse, it is not necessarily an indication of sexual abuse. The possibility of false allegation needs to be considered, particularly if allegations are coming from the parent rather than a child, if parents are engaged in dispute over custody or visitation, and/or if the child is a preschooler. False allegations may arise in other situations as well, such as the misinterpretation of a child's statement or behavior by relative or caretakers. And children may make false statement in psychiatric evaluations. A case of false allegation of sexual abuse made by mentally retarded 10 year-old girl who has been located in an institute is presented. During her evaluation process, it was clinician's diagnostic impression that she had no been sexually abused but sexually stimulated in some way, and most of what she said was a fantasy lie. Its pathological mechanism is discussed in terms of pseudologia fantastica along with the review of literatures.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.389-401
• /
• 2016

This study attempted to present the monthly distribution of the inshore gill netters for the prevention of propeller failure caused by the damage of fishing gear by the merchant vessels in the West Sea. This study was conducted using the transmitting device of fishing location (V-Pass) data for 1 year in 2014. The grid intervals are $30minute{\times}30minute$ ($latitude{\times}longitude$) based on the section of the sea. A total of 56 sections were analyzed by constructing a grid. The results revealed that the section no. 194 with the highest density index showed no fishing gear damage accident. But the section no. 193 with a relatively lower density index showed more frequent fishing gear damage accident. It is because the section no. 193 is included in the main route of the merchant vessels. Based on this analysis, it is found that the fishing gears are not damaged in proportion to density index but risk of damage exists according to the main routes of merchant vessels. Therefore, for the safe navigation of the merchant vessels, notifying the waters of $34.5^{\circ}{\sim}35.5^{\circ}$ at latitude and $125.67^{\circ}{\sim}126^{\circ}$ at longitude, as a navigational warning area from May through September, will prevent marine accident, such as propeller failure and fishing gear damage. Accordingly, when the merchant vessels navigate in the section no. 193 and 203, the area of $34.5^{\circ}{\sim}35.5^{\circ}$ at latitude and $125.5^{\circ}{\sim}125.67^{\circ}$ at longitude is recommended for the safe navigation.