• 디지털콘텐츠학회 논문지
• /
• 제5권4호
• /
• pp.251-256
• /
• 2004

반도체 집적회로를 만드는 토대가 되는 실리콘 웨이퍼의 표면은 고품질 회로를 구성하기 위해 극도의 평탄도가 요구되므로 평탄도는 양질의 웨이퍼를 보증하는 가장 중요한 요소이다. 따라서 실리콘웨이퍼 생산의 10개의 공정 중 거칠어진 웨이퍼 표면을 고도의 평탄도를 갖도록 연마하는 폴리싱공정은 매우 중요시 되는 생산라인이다. 현재 이 공정에서는 담당 엔지니어가 웨이퍼의 모형을 측정장비의 모니터에서 육안으로 관찰하여 판단하고 평탄도를 높이기 위한 제어를 하고 있다. 그러나 사람에 의한 것이므로 많은 경험이 필요하고 일일이 체크해야하는 번거로움이 있다. 본 연구는 이러한 비효율적인 작업의 효율화를 위해 웨이퍼의 모형을 디지털 컨텐츠화하여 폴리싱 공정에 있어 평탄도를 사람이 아닌 시스템에 의해 자동으로 측정하여 제어하는 알고리즘을 제안한다. 또한 제안한 전체 웨이퍼 평탄도 추정알고리즘을 토대로 실제 현장에서 쓰이는 웨이퍼 각 사이트별 평탄도를 측정하기 위한 사이트두께 추정 알고리즘을 제안한다.

• 한국공작기계학회논문집
• /
• 제17권1호
• /
• pp.21-28
• /
• 2008

The final polishing process is based on slurry, pad, conditioner, equipment. Therefore, the concept of wafer final polishing is also necessary for repeatability of results between polished wafers. In this study, the machining conditions have a pressure, table speed, machining time and slurry ratio. This research investigated the surface characteristics that apply variable machining conditions and response surface methodology was used to obtain more flexible and optimumal condition base on Taguchi method. On the base of estimated response surface curvature from the equation and results of Taguchi method, combined design of experiment was considered to lead to optimumal condition. Finally, polished wafer was obtained mirror like surface.

• 한국기계가공학회지
• /
• 제11권1호
• /
• pp.1-6
• /
• 2012

The polishing of silicon wafers has an important role in semiconductor manufacturing. Generally, getting a flat surface such as a mirror is the purpose of the process. The wafer surface roughness is affected by many variables such as the characteristics of the carrier head unit, operation, speed, the pad and slurry temperature. Optimum process conditions for experimental temperature, pH value, down-force, slurry ratio are investigated, time is used as a fixed factor. This study carried out a series of experiments at varying platen, chuck rpm and oscillation cpm taking particular note of the difference between the rpm and the affect it has on the surface roughness. In this experiment determine the optimum conditions for polishing silicone wafers.

• 한국기계가공학회지
• /
• 제11권6호
• /
• pp.48-54
• /
• 2012

In recent years, developments in the semiconductor and electronic industries have brought a rapid increase in the use of large size silicon. However, for many companies, it is hard to produce 400mm or 450mm wafers, because of excesive funds for exchange the equipments. Therefore, it is necessary to investigate 300mm wafer to obtain a better efficiency and a good property rate. Polishing is one of the important methods in manufacturing of Si wafers and in thinning of completed device wafers. This research investigated the surface characteristics that apply variable machining conditions and Taguchi Method was used to obtain more flexible and optimal condition. In this study, the machining conditions have head speed, oscillation speed and polishing time. By using optimum condition, it achieves a ultra precision mirror like surface.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.175-176
• /
• 2012

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 춘계학술발표대회 및 제12회 신소재 심포지엄
• /
• pp.20.1-20.1
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.749-750
• /
• 2007

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.1-6
• /
• 2008

In recent years, developments in the semiconductor and electronic industries have brought a rapid increase in the use of large size silicon wafer. For further improvement of the ultra precision surface and flatness of Si wafer necessary to high density ULSI, it is known that polishing is very important. However, most of these investigation was experiment less than 300mm diameter. Polishing is one of the important methods in manufacturing of Si wafers and in thinning of completed device wafers. This study reports the machining variables that has major influence on the characteristic of wafer polishing. It was adapted to polishing pressure, machining speed, and the slurry mix ratio, the optimum condition is selected by ultra precision wafer polishing using load cell and infrared temperature sensor. The optimum machining condition is selected a result data that use a pressure and table speed data. By using optimum condition, it achieves a ultra precision mirror like surface.

• 디지털콘텐츠학회 논문지
• /
• 제3권1호
• /
• pp.113-122
• /
• 2002

반도체와 관련한 실리콘웨이퍼의 평탄도는 양질의 웨이퍼를 보증하는 가장 중요한 요소이다. 따라서 평탄도(flatness)를 측정하고 제어하는 Polishing이라는 공정은 웨이퍼 생산의 여러 라인중 특별히 중요시 되는 과정이며 현재 이 공정에서는 담당 엔지니어가 웨이퍼의 모형을 모니터에서 육안으로 관찰하여 판단하고 평탄도를 높이기 위한 제어를 하고 있다. 그러나 사람에 의한 것이므로 많은 경험이 필요하고 일일이 체크해야하는 번거로움이 있다. 본 연구는 이러한 비효율적인 작업의 효율화를 위해 이루어 졌으며 Polishing 공정에 있어 평탄도를 사람이 아닌 시스템에 의해 자동으로 측정하여 제어하는 알고리즘을 제안한다. 여기서 제안한 시스템은 보간 다항식을 이용하여 웨이퍼 전역의 두께를 추정하고 Polishing공정에서 평탄도를 높이기 위해 제어 가능한 모형별로 분류할 수 있도록 하였다.

• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.53-60
• /
• 2004

We have developed and manufactured an experimental ultrasonic polishing machine with frequency of 20kHz at the power of vibration 1.7㎾ for effective ultrasonic polishing in processing of high hardness material. Design of the horn is performed by the FEM analysis. The following conclusions were empirically deduced through experimental results to clarify the major elements which affect the surface roughness during the ultrasonic process by following the experimental plans. The ultrasonic polishing machine has been developed in parts of structure part, ultrasonic generator, vibrator. We were able to process the high hardness material without difficulty as a result of ultrasonic polishing by utilizing the groove added step-type horn. Through analyzing by applying the experimental plans, the rotating speed of the horn was determined to be the major factor in influencing the surface roughness. In the case of ceramic, wafer, we were able to obtain good surface roughness when the feed rate and the ultrasonic output were higher. Because the load on slurry particle increases when the ultrasonic output is higher, the processed surface becomes worse in the case of optical glass.