• Composites Research
• /
• 제16권6호
• /
• pp.1-9
• /
• 2003

본 논문에서는 웨이블 분포 함수를 이용한 확률 파손 해석을 통해 복합재 압력 용기의 섬유 강도를 예측하였다. 그리고 섬유 강도의 크기 효과를 확인하고 해석의 타당성을 입증하기 위하여 섬유 인장 시편, 한 방향 복합재 시편과 복합재 압력 용기를 이용만 강도 시험이 수행되었다. 해석적 방법으로 웨이블 최약 링크 파손 모델과 다단계 연속 파손 모델을 이용하였고, 해석 결과를 상호 비교하였다. 크기 효과에 의해, 시편의 부피가 증가함에 따라 섬유 인장 강도가 감소하는 경향을 나타내었다. 해석을 통해 예측한 한 방향 복합재 시편과 복합재 압력 용기의 후프 층 섬유 강도 분포는 시험 값과 좋은 일치를 보였다. 섬유 강도의 크기 효과는 소재와 제작 공정 변수의 함수로서, 다른 소재 및 제작 공정에 대해서는 다른 크기 효과를 보이게 된다.

• Journal of the Korean Wood Science and Technology
• /
• 제31권5호
• /
• pp.72-79
• /
• 2003

신뢰성 설계에서 재료강도의 분포 특성은 기본적인 입력 변수로 사용된다. 따라서 강도특성의 분포형태 및 그에 따른 인자들을 정확하게 결정하는 것은 신뢰성 설계를 위한 필수적인 작업이다. 지금까지 강도성능 평가는 주로 무결점 소시편에 대한 실험결과가 사용되어 왔다. 그러나 이러한 방법은 부재가 실재 사용되는 조건을 제대로 반영하지 못함에 따른 오차를 포함하게 된다. 본 연구에서는 구조재로 많이 사용되는 2×6부재(38 mm×140 mm, 길이 3.0 m) 498본에 대하여 육안검사를 통해 등급을 구분하고, 휨시험을 실시하였다. 신뢰성 설계로 전환을 위해 각 등급의 강도특성에 대한 분포형태 및 인자를 결정하였다. 분포형태의 결정을 위해 정규분포, 대수정규분포, 웨이블분포의 세가지 분포형태에 대한 square error를 비교하고, KS test를 통하여 결정된 분포형태의 적합성을 확인하였다. 모든 등급에서 휨강도(MOR)의 가장 적합한 분포형태는 웨이블분포로 나타났으며, 휨탄성계수의 경우는 정규분포가 가장 적합한 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제27권12호
• /
• pp.2004-2010
• /
• 2003

Fracture life and crack retardation behavior were examined experimentally using CT specimens of aluminum alloy 5083. Crack retardation life and fracture life were a wide difference. between 0.8 and 0.6 in proportion to ratio of load reduction. The wheeler model retardation parameter was used successfully to predict crack growth behavior. By using a crack propagation rule, prediction of fracture life can be evaluated quantitatively. A statistical approach based on Weibull distribution was applied to the test data to evaluate the dispersion in the retardation life and fracture life by the change of load reduction.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.435-438
• /
• 2009

Wind speed is measured on the nacelle at the location of wind turbines are installed. The wind speed is transformed to inlet wind speed at the front of hub using newly developed algorithm derived from energy conservation. Wind energy potential is analyzed using the inlet air velocity in the region of Bieung-do wind farm. As results, wind speed depending on the month, yearly averaged wind speed, wind speed distribution, and energy density are showed in this study. Bieung-do area is close to Saemankeum, and the analysis of wind energy potential in Bieung area will be helpful to understand and develop wind energy industry in Saemankeum area.

• 대한기계학회논문집
• /
• 제16권2호
• /
• pp.200-206
• /
• 1992

The effect of fiber diameter and gauge length on pull-out test for the interfacial properties in fiber reinforced resin composites have been investigated and these results have been arranged as statistical analysis. The fiber and matrix resins used for this study were stainless steel fiber (SUS316) and carbon fiber (high strength type), epoxy and high density polyethylene resin. From this study, it has been found that shear strength are constant regardless of gauge length of pull-out test and coefficient of variation depend on fiber diameter. In addition, it has been found that the interfacial shear strength decreased with the increasing fiber diameter, and in all case, Weibull parameter (m) has approximately 1.2/C.O.V.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.81-84
• /
• 2008

This paper discussed the validity of wind force power generation in consideration of the topographical characteristics of Korea. In order to estimate the exact generation of wind power plants, we analyzed and compared wind resources in mountain areas and plain areas by introducing not only wind velocity, the most important variable, but also wind distribution and wind standard deviation that can reflect the influence of landform sufficiently. According to the results of this study, generation was higher at wind power plants installed in southwestern coastal areas where wind velocity was low than at those installed in mountain areas in Gangwondo where wind velocity was high. This suggests that the shape parameter of wind distribution is low due to the characteristics of mountain areas. and the standard deviation of wind velocity is large due to the effect of mountain winds, and therefore, actual generation is low in mountain areas although wind velocity is high.

• 한국태양에너지학회 논문집
• /
• 제28권6호
• /
• pp.24-32
• /
• 2008

This paper discussed the Feasibility study of wind power generation considering the topographical characteristics of Korea. In order to estimate the exact generation of wind power plants, we analyzed and compared wind resources in mountain areas and plain areas by introducing not only wind speed, the most important variable, but also wind distribution and wind standard deviation that can reflect the influence of landform sufficiently. According to the results of this study, generation was almost the same at wind power plants installed in southwestern coastal areas where wind speed was low as at those installed in mountain areas in Gangwondo where wind speed was high. This demonstrates that the shape parameter of wind distribution is low due to the characteristics of mountain areas, and the standard deviation of wind speed is large due to the effect of mountain winds, therefore, actual generation compared to southwestern coastal areas is almost similar in mountain areas even though wind speed is high.

• 한국태양에너지학회 논문집
• /
• 제30권2호
• /
• pp.54-64
• /
• 2010

Interest in new and renewable energies like solar energy and wind energy is increasing throughout the world due to the rapidly expanding energy consumption and environmental reasons. An essential requirement for wind force power generation is estimating the size of wind energy accurately. Wind energy is estimated usually using meteorological data or field measurement. This study attempted to estimate wind energy density using meteorological data on daily mean wind speed and the Weibull parameters in Seoul, a representative inland city where over 60% of 15 story or higher apartments in Korea are situated, and Busan, Incheon, Ulsan and Jeju that are major coastal cities in Korea. According to the results of analysis, the monthly mean probability density distribution based on the daily mean wind speed agreed well with the monthly mean probability density distribution based on the Weibull parameters. This finding suggests that the Weibull parameters, which is highly applicable and convenient, can be utilized to estimate the wind energy density distribution of each area. Another finding was that wind energy density was higher in coastal cities Busan and Incheon than in inland city Seoul.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.58-64
• /
• 1998

An analysis method for the reliability of ceramic structures subjected to thermal shocks is presented. Flaws with the size of given probability distribution function are assumed to be distributed at random with a certain density per unit volume in the structures. Criterions for crack instability are derived for brittle solids under general thermal stresses. A probabilistic failure model is presented to study the probability of crack instability for brittle solids containing cracks with uncertain size. The reliabilities of brittle structures are evaluated based on the weakest-link hypothesis, which states that a structure fails when the cracks in any differential volume become unstable. A numerical example is given to demonstrate the application of the proposed method.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.21-24
• /
• 2005

This study explains the procedure that should be taken to develop a successful wind park project. It Provide guideline for activities and studies to be done step by step solution. This study follow a chronological flow through the development process. They cover Technical consideration, Assessment of Wind Energy Resource, Wind park siting and Energy yield calculation. It's build on the experience gained by the Youngduk Wind Park project and give the playa role in the development of wind energy projects. It is important to understand all theses issues if a new project is to be successfully completed.