• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.2
• /
• pp.12-21
• /
• 1997

Nowadays, non-pollution energy sources have been strongly needed because of the exhaustion of fossil fuels and serious environmental problems. Because wind energy can be enormously obtained from natural atmosphere, this type of energy has lots of advantages in a economic and pollution point of view. This study has established the aerodynamic and structural design procedure of the rotor blade with an appropriate aerodynamic performance and structural strength for the 500㎾ medium class wind turbine system. The aerodynamic configuration of the rotor blade was determined by considering the wind condition in the typical local operation region, and based on this configuration aerodynamic performance analysis was performed. The rotor blade has the shell-spar structure based on glass/epoxy composite material and is composed of shank including metal joint parts and blade. Structural design was done by the developed design program in this study and structural analysis, for instance stress analysis, mode analysis and fatigue life estimation, was performed by the finite element method. As a result, a medium scale wind turbine rotor blade with starting characteristics of 4m/s wind speed, rated power of 500㎾ at 12m/s wind speed and over 20 years fatigue life has been designed.

• Spatial Information Research
• /
• v.18 no.4
• /
• pp.13-22
• /
• 2010

For implementing TMDL(Total Maximum Daily Loading) to adopt more effective management of water pollution, water quality modeling is pre-requisite and such modeling requires the extraction of stream centerline. The institutes responsible for the water quality modeling, however, generates the stream centerline with their own criteria and this lead to low accuracy of the extracted centerline as well as different modeling results for the same watershed. Therefore, this study mainly focused on the development of extraction method of the stream centerline. For that, an automated method has been developed through the integration of the centerline extraction method using a maximum inscribed circle with GIS. The result has shown that the newly developed method could enable to represent more details of the stream topography along with enhanced accuracy compared with conventional extraction method. Furthermore, the new method can afford centerline extraction for the island areas which has been the limitation of the conventional method thereby supporting water quality modeling in a detailed level.

• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.273-280
• /
• 2017

In this paper, a freeform reflector is designed for low road lighting. In the case of low road lighting, which requires light distribution over a wide lane compared to the height, it is difficult to match uniformity, compared to existing road lighting. To satisfy road lighting grade M3, the reflector was divided into nine parts, and the inclination of the reflecting surface was changed to have the desired light distribution. The fitted curves were drawn based on each point, following the formula that was derived. Through the Street Light Simulation of LightTools, we confirmed that it meets the M3 road lighting standard; we then made it directly and satisfied the lighting grade on an actual road, proving the validity of the design result.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.95-95
• /
• 2010

자동차 산업에서 차체를 성형하는 프레스 금형 산업은 꾸준히 증가하고 있는 자동차 생산대수와 함께 성장해가고 있으며, 자동차 산업의 국제 경쟁이 심해지고 소비자들의 요구가 다양해짐에 따라 신제품 개발주기에 발맞추어 금형의 제작에도 단납기 및 비용절감을 위한 노력과 제품의 품질 향상을 위해 신기술, 신공법이 적용되고 있다. 한편 자동차 차체를 제작하는 프레스 금형가공은 박판소재를 원하는 형상으로 제작하는 공정으로써, 프레스의 상 하 운동을 이용하여 강판을 성형한다. 이러한 금형의 형태는 곧 자동차 차체 제품의 형태를 완성하므로 제품을 성형하는 도중에 금형과 소재의 마찰에 의해 금형의 마모나 마멸이 발생하여 제품의 품질을 저하시킬 우려가 있다. 따라서 금형의 내마모성 및 수명을 향상시키기 위한 방안들 중 표면경화처리가 행해지고 있으며, 그중 공정 속도가 빠르고 국부적인 열처리가 가능한 레이저 표면처리 방법이 많은 관심을 받고 있다. 본 연구에서는 이러한 금형의 성질을 향상시키기 위해 고출력 다이오드 레이저를 이용하여 프레스 금형공정 중 드로잉(drawing) 공정에의 적용을 위한 표면경화처리를 실시하였다. 최대출력 4.0kW의 다이오드 레이저를 사용하였으며, 6축 외팔보 로봇에 열처리용 광학계를 장착하여 열처리를 실시하였다. 또한 광학계 부근에는 적외선 온도센서가 부착되어있어 열처리시 시험편의 표면온도를 실시간으로 측정할 수 있도록 구성되어져있다. 시험편은 금형재료용 구상흑연 주철인 FCD550 소재를 사용하였으며, 공정변수에 따른 열처리 특성을 파악하고, 그 경화특성을 평가하였다. 실험 결과, FCD550 소재의 표면 열처리시 레이저 출력 3.5kW, 빔 이송속도 3mm/sec에서 최적의 열처리 특성을 나타내었으며, 이때의 최고 경도는 930Hv을 나타내며 모재에 비해 경도가 3배 정도 상승하는 우수한 경화특성을 보였다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.3
• /
• pp.68-73
• /
• 2002

Acidogenic fermentation of primary sludge was investigated for the solution to reduce the sewage sludge and develope external carbon source for BNR process. In a viewpoint to use existing anaerobic digestion tanks, we didn't change environmental factors such as reactor configuration, temperature, pH and investigate the variation of solubilization rates, acidification rates and environmental factors which affected by the variation of HRT. The average solubilization rates were 0.0309 and $0.0204mgSCOD_{prod.}/mgICOD_{inf.}$ at a HRT of 3 and 1.5 days, respectively. The average acidification rates were 0.0068mg HAc/mg $TCOD_{inf.}$ and 0.0652mg HAc/mg $VSS_{destroyed}$ at a HRT of 3day. At a HRT of 1.5 days the average acidification rates were 0.0060mg HAc/mg $TCOD_{inf.}$ and 0.0346mg HAc/mg $VSS_{destroyed}$. For the period of experiments alkalinity and pH were properly maintained without artificial adjusting.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.423-427
• /
• 2007

현재까지 하천의 흐름, 유사이동, 수질해석을 위해서는 외국에서 개발된 소프트웨어를 주로 사용해 오고 있었다. 학술 분야에서는 국내의 모형들이 연구되어졌지만 그에 따른 GUI나 가시화 시스템에 대한 실용화는 거의 이루어지지 못하였다. 본 연구에서는 범용 2차원 하천 흐름, 수질, 유사이동 해석을 위한 GUI 및 가시화 시스템(이하 RAMS, River Analysis and Modeling System)을 개발하여, 하상변동 및 오염물 이송확산에 미치는 수리학적 영향을 규명할 수 있도록 하였다. RAMS는 크게 mesh generator, 해석 모형의 입력 GUI 모듈, 입출력 파일 생성 모듈, 그리고 모의 결과의 가시화 시스템 등으로 이루어져 있다. Mesh generator는 지형자료(이미지 또는 DXF 파일)를 백그라운드 이미지로 가져올 수 있으며, 삼각형 노드와 사각형 노드를 지원한다. 또한 thin triangle들을 제거하는 기능, 선택된 요소(elements)를 제거하는 기능, triangle들을 서로 병합하여 사각형 요소를 만드는 기능, mesh의 renumbering 기능 등을 구현하였다. 특히 사용자가 잘못 생성한 요소들을 바로 이전 상태로 환원하는 undo/redo 기능을 구현하여 능률적인 mesh 생성이 가능하다. 해석 모형의 입력 GUI 모듈에는 각 해석 모형(흐름, 수질, 유사이동)에 특화된 GUI를 설계하여 사용자는 보다 친숙한 환경에서 편리하게 자료를 입력할 수 있다. 입출력 파일 생성 모듈에서는 사용자가 GUI를 통해 입력한 자료를 파일로 변환하여 즉각적으로 모의를 수행하며, 그 출력 파일을 읽어 모의 결과를 자동적으로 가시화한다. 모의 결과의 가시화 시스템에서는 수많은 모의 결과를 체계화하여 등고선 및 화살표 등으로 표현하며, time step 별 결과를 바로 확인할 수 있다. 또한 애니메이션 기능을 구현하여 사용자가 원하는 구간의 time step에서의 모의 결과를 연속적으로 볼 수 있으며, 이 애니메이션을 AVI 파일로 변환하여 다른 동영상 프로그램에서도 재생할 수 있다. 본 연구에서 개발한 RAMS를 이용하여 하천 설계 시 그 공학적 근거를 제시하고, 국내 실정에 맞는 국산 소프트웨어를 제공함으로써 하천의 흐름, 수질, 유사이동 해석에 의한 하천의 수리학적 거동을 보다 편리하고 정확하게 모의할 수 있을 것으로 기대된다.

• Journal of Digital Convergence
• /
• v.14 no.2
• /
• pp.209-216
• /
• 2016

In these days, considering the trend to make various information blended based on spatial information like road, buildings and geography, it is to be very important to visualize maps for showing the information efficiently. However, geometry which is composed with line, polygon commonly used on web service has limitation to express information by limit of usage as well as spending certain time to show the information via map. That's why this study develops the efficient way to visualize huge and complex spatial information. This way is to bring partial space with spatial query, and then query and expand information excluded the former area after detecting movement event based on client. When the way is implemented, it will be expected to make efficient visualization in entire system by not bringing unnecessary information but shortening spending time to show area because it just shows areas which clients want to see.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1264-1271
• /
• 1990

The vortex lattice method was adopted to predict the aerodynamic performance of a horizontal axis wind turbine. For this simulation. the rotor blade was divided into many panels both in chordwise and spanwise direction and then replaced by horseshoe vortices. The wake was divided into two parts of near wake and far wake : the near wake was assumed as helical vortex line elements and the far wake was modeled by semi-infinite circular vortex cylinder. The induced velocity components were calculated by the Biot-Savart law. By this way the power coefficient was obtained and represented as a function of the tip speed ratio. The numerical results obtained were compared with those of the other methods and experimental results and showed good agreement with experimental results.

• Elastomers and Composites
• /
• v.34 no.4
• /
• pp.321-331
• /
• 1999

The curing process is the final step in tire manufacturing whereby a green tire built from layers of rubber compounds is formed to the desired shape and the compounds are converted to a strong, elastic materials to meet tire performance needs under elevated pressure and temperature in a press. A numerical optimization procedure was developed to improve product quality in a tire curing process. First, a dynamic constrained optimization problem was formulated to determine the optimal condition of the supplied cure media during a curing process. The objective function is subject to an equality constraint representing the process model that describes the heat transfer and cures kinetic phenomena in a cure press and is subject to inequality constraints representing temperature limits imposed on cure media. Then, the optimization problem was solved to determine optimal condition of the supplied cure media for a tire using the complex algorithm along with a finite element model solver.

• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.400-406
• /
• 1999

Piezoresistive flow sensors with four different types of microbeam structures were fabricated using (100), n/$n^+$/n three-layer silicon wafer and their characteristics were investigated. Piezoresistors were formed through boron diffusion and its values were about $1\;k{\Omega}$. Three-dimensional silicon microbeams were constructed by porous silicon micromachining and curled microbeams were fabricated by the difference in the thermal expansion coefficient between silicon and metal. The output response of the fabricated sensor was evaluated through half- bridge. The output voltage increased with increasing length of microbeam at the same flow velocity, while the detectable measurement range extended with decreasing length of microbeam. The output voltage of the fabricated sensors were increased with quotient of 3.2 of the flow rate since the stress of the beam versus the gas flow showed non-linear characteristics.