• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1657-1662
• /
• 2003

In this study, to research characteristics of heat flow of magnetic fluid, it's studied about numerical and experimental method of natural convections change and characteristics of heat transfer in Concentric double pipe annuli as analysis model. In the result, natural convection of magnetic fluid is controlled by direction and strength of the impressed magnetic field. Especially, according to average Nusselt number, heat transfer is the smallest on the balancing point between body force and buoyancy.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2101-2104
• /
• 2003

Experimental investigations are performed for the rarefied gas flows in a disk-type drag pump (DTDP). The pump considered in this paper consists of grooved spiral channel on rotors and planar stators. The flow-metre method is adopted to calculate the pumping speed. Compression ratio and pumping speeds for the nitrogen gas are measured under the inlet pressure range of $0.001{\sim}4$ Torr. The maximum of compression ratio was about 3300 for three-stage DTDP, 1000 for two-stage and 100 for single-stage DTDP at zero throughput. The number of stage influences the pumping speed of DPDT

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.15-21
• /
• 1999

This study investigates the free and forced vibration characteristics of an annular piezoelectric motor stator constructed of two piezoelectric material layers and one stainless steel layer. The annular piezoelectric motor stator is subjected to a travelling load produced by piezo drive electrical voltage input to the two piezoelectric layers. The stator is modeled as an annular laminated plate based on the classical plate theory and the governing equations are derived via Hamilton's variational principle. Variation of the free vibration characteristics as a function of several design parameters has been studied and based on this result, the forced vibration responses to the input electricity of various frequencies and magnitudes are investigated. The obtained results will provide an important criterion, a priori, in the design of piezoelectric motors.

• 한국가시화정보학회:학술대회논문집
• /
• 2003.11a
• /
• pp.99-102
• /
• 2003

PIV(Particle Image Velocimetry)was used to visualize the interaction of reed valve of the reciprocating compressor. The valve is the key part which governs the efficiency, noise and reliability of the compressor, so the development of analytical model about valve performance is necessary. As the valve reed is opened and closed by pressure pulsation, the flow characteristic of the refrigerant passing the valve is very important. In the present study, a circular disk with inclination is assumed to be the valve reed of a reciprocating compressor, The mean velocity shows the vortical characteristic of this flow. It is found that the back flow is affected by the height of reed valve of reciprocating compressor.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.1
• /
• pp.142-151
• /
• 1995

회전체의 자동밸런싱을 위하여 고안된 자기보상 동적균형기는 홈이파인 원판에 강구와 저점성유체를 지닌 구조체이다. 유도된 운동방정식으로 부터 자기보상 동적균형기의 작동조건을 조사하기 우하여 수치해석을 통한 동 특성을 검토하였다. 수치해석의 결과에 근거하여 임계속도보다 높은 범위에서는 자기보상 동적균형기는 정상작동을 보여주었다. 임계속도에서는 회전계의 균형이 강구와 점성유체와의 감쇠계수에 의존하였으나 임계속도보다 낮은 범위에서는 어떠한 조건에 대해서도 작동하지 않음을 알 수 있었다. 자동차 및 항공기에도 응용가은한 자기보상 동적균형기의 작동조건들을 본 논문에서 예시하였다.

• Journal of the KSME
• /
• v.22 no.3
• /
• pp.191-195
• /
• 1982

소결 금속(sintered metal)은 기공(pore)의 존재로 성형에 있어서 체적변화를 유발하므로 이제까지 사용되어오던 체적변화를 유발하므로 이제까지 사용되어오던 일반 소성이론(conventional plasticity theory)은 적용할 수 없기 때문에 소결금속에 대한 소성이론을 정립해 오고 있다. 그 발달 과정을 보면 미국과 일본에서 각각 독자적인 방법으로 진행되었는데 미국에서는 Kuhn씨가 포아숀 비(.nu.)를 정의하여 실험적으로 구하고 이것을 기초로 하여 항복조건을 정립하고 응력과 변형도율과의 관계를 유도해 냄과 동시에 알루미늄 분말 소결원판 단조에 적용하여 그 실용성을 예시하였다. 한편 일본에서는 교오토오 대학의 Shima, Oyane등이 연구 정립한 것으로서 다공정 금속과 그 본금속의 항복 응력비와 정수압의 항복 응력에 대한 영향도를 정의하여 실험을 통하여 결정한 다음 항복조건을 만들고 이로부터 응력과 변형율과의 관계, 등가 변형율을 유도하였고 이를 폐금형 압축시험에 적용하였다.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.683-686
• /
• 2002

The hydrodynamic instability of the three-dimensional boundary-layer over a rotating disk has been numerically investigated for three cases flows using linear stability theory (i.e. Rossby number, Ro = -1, 0, and 1). Detailed numerical values of the disturbance wave number, wave frequency, azimuth angle, radius (Reynolds number, Re) and other characteristics have been calculated for $K{\acute{a}}rm{\acute{a}}n$, Ekman and $B{\"{o}}ewadt$ boundary-layer flows. Neutral curves for these flows are presented. Presented are the neutral stability results concerning the two instability modes (Type I and Type II) by using a two-point boundary value problem code COLUEW that was based upon the adaptive orthogonal collocation method using B-spline. The prediction from the present results on both instability modes among the three cases agrees with the previously known numerical and experimental data well.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.663-666
• /
• 2002

Hard disk drived (HDD) in computer are used extensively as data storage capacity. The trend in the computer industry to produce smaller disk drives rotating at higher speeds requires an improved understanding of fluid motion in the space between disks. The distribution of pressure disturbance on disks has relation to flow structure. To investigate the flow structure, time-resolved hot-wire measurements of the circumferential velocity component were obtained for the flow between the center pair of four disks of common radius $R_2$ coretating at angular velocity ${\Omega}$ in a fixed cylindrical enclosure. Hot-wire supporter acts as an obstruction in this case. The effects of rotating speed and size of hot-wire supporter diameter between disks on the flow driven by disks were investigated. Velocity spectra at the fixed space were measured to obtain the structure of inner and outer region in flow field.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.577-580
• /
• 2002

In this paper, the pumping performance of the disk-type drag pump which works in the outlet pressure range from 4 to 0.001 Torr is studied experimentally. The pumping characteristics of various drag pumps are performed. The inlet pressures are measured for various outlet pressures of the test pump. The flow-meter method is adopted to calculate the pumping speed. Compression ratios and pumping speeds for the nitrogen gas are measured. The present experimental data show the leak-limited value of the compression ratio in the molecular transition region. The rotational speed of the pump is 24,000rpm. The inlet pressures are measured for various outlet pressures of the test pump. The ultimate Pressures for zero throughput are measured for three-stage, two-stage and single-stage disk-type, respectively.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.11
• /
• pp.1075-1082
• /
• 2004

This research demonstrates the shock response analysis of a head disk assembly subjected to a half-sine shock pulse in the axial direction. In case of disk analysis, the numerical method presented by Barasch and Chen is used. Galerkin method is used with mode shape by numerical method. Head-suspension system is modeled as the cantilever in order to get simulation results. Simulation results of HDA are calculated by Runge-Kutta method. Finally, shock responses of head and disk are analyzed according to the change of the rotating speed of the disk.