• Journal of Oral Medicine and Pain
• /
• v.32 no.3
• /
• pp.293-303
• /
• 2007

The purpose of this paper is to evaluate if there is a relationship between anterior disc displacement without reduction and development of anterior open bite, and a relation between occurrence of open bite and occlusal appliance therapy. In general, the statistically significant differences were found between the Group 1 and 2 and normal mean group. The variables that represent mandibular size and form, showed a statistical significance in all 3 groups. Also 3 groups patients had a smaller ANB, a larger FMA than normal mean group. When we compared the 3 groups with respect to all cephalometric measurements by One-way analysis of variance (ANOVA), group 1 and 2 patients had a larger FMA, a larger SN to mandibular plane angle, a larger maxillomandibular plane angle, a larger occlusal plane to mandibular plane angle, a smaller total posterior facial height/total anterior facial height(%), and a larger gonial angle than group 3. The statistically significant differences were not found between the Group 1 and 2, and skeletal patterns were similar. Thus, morphologic features of patients with vertical discrepancies may represent a risk factor for the development of anterior open bite with or without occlusal appliance treatment. In case of patients with vertical discrepancy, we may have to be more careful when inducing a change of the vertical dimension.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.1
• /
• pp.1-10
• /
• 2006

paper presents the results of the use of the differential transformation technique in analyzing the free vibration of circular plates.calculations were carried out and were compared with previously published results. The results that were obtained when this method was used coincide with the results of The present analysis shows the usefulness and validity of differential transformation in solving a solid-circular and annular-plate problem in terms of free-vibration responses.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2725-2730
• /
• 2007

Turbo-type molecular drag pumps ( MDPs ) are used in the liquid crystal display ( LCD ), semiconductor and other thin film industries. Siegbahn ( disk-type ) molecular drag pumps are used as high-pressure stages in the hybrid-type turbomolecular pumps, where they can operate in the viscous, the transition and the free molecular flow regime. In this study is performed to investigate the pumping characteristics of three-stage disk-type molecular drag pump ( DTDP ) in the molecular transition flow region. The experiments are measured using five vacuum pressure gauges in the positions for rotors of DTDP. The test is performed with nitrogen gas ( $N_2$ ).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.598-598
• /
• 2010

와이퍼 작동 중에 발생하는 진동소음 중 1000Hz 이상의 스퀼 소음은 발생 메커니즘이 정확하게 알려지지 않았으며 발생하는 조건도 불규칙하다. 이 스퀼 소음의 발생 빈도 및 주파수를 변경하는 설계를 위하여 스퀼 진동 소음의 발생 메커니즘의 원인분석이 우선적으로 이루어져야 한다. 이 논문에서는 자동차 와이퍼 시스템에서 워셔액을 분사하였을 때 발생하는 스퀼 소음을 측정하고 인자 별로 분석하였다. 스퀼 소음이 발생하는 인자들을 마찰계수와 연관이 있는 인자, 기하학적인 인자, 와이퍼의 운동과 관련된 인자들로 나누어 분석하였다. 실제 와이퍼 시스템을 구현하기 위하여 모터와 원판 지지대 등을 이용하였고, 마이크로폰, 레이저 바이브로미터, 노이즈북, 아르테미스를 이용하여 측정 및 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.7
• /
• pp.1149-1155
• /
• 1997

J-integral for a subsurface horizontal crack in a circular plate with an inner hole under rolling line contact is evaluated according to loading positions with various load conditions, crack length and crack location. Two-dimensional crack is modeled, and the relation between Tresca stress for uncracked model and J-integral is discussed. The loading location which gives the maximum J-integral depends on load condition and crack location, and the presence of friction force increases Tresca stress and J-integral near the surface. Regardless of friction force, crack location that gives maximum J-integral is the same as that of maximum Tresca stress in an uncracked model, and the value of J-integral is propotional to crack length. It is also showed that the variation of an inner radius of a disk does not effect J-integral value.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.3
• /
• pp.960-967
• /
• 1996

Directional frequency response functions(dFRFs) are introduced for isotropic rotating disks, treating pairs of excitations and measurements as the complex input and output, respectively. It is shown that the dFRFs can be effectively used for separation of the forward and backward travelling wave modes and identification of the diametrical node numbers associated with modes of interst. Numerical simuations and experimental works are performed to demonstrate the analytical development and its validity.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.179-184
• /
• 2001

A shrouded rotating disk airflow has a simple figure on geometric basis, but has various and complicated forms of flow. This flow type can be applied to many turbo devices such as information storage device(optical disk). Circumferential velocity frequency in the middle plane between disk and shroud wall is measured using laser Doppler velocimeter. Solid body region of flow was founded when low Reynolds number relatively. Through the informations of the experimental results. we could examine the number and distribution of the vortices. When Reynolds number $3.80{\times}10^5$ there is a dominant frequency of which vortices number is 5.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.213-218
• /
• 2001

The characteristics of the fluid flow and mass transfer in a vertical atmospheric pressure chemical vapor deposition (APCVD) are numerically studied. In order to get the optimal process parameters for the uniformity of deposition on a substrate, Navier-Stokes and energy equations have been solved for the pressure, mass-flow rate and temperature distribution in a CVD reactor. Results show that the thermal boundary condition at the reactor wall has an important effect in the formation of buoyancy-driven secondary cell when radiation effect is considered. Results also show that reduction of the buoyancy effect on the heated reactor improves the uniformity of deposition.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.349-356
• /
• 1986

For the extension of application in flash method measuring the thermophysical properties of materials, the heat diffusion equation with the heat transfer loss from front, rear, and circumferential surfaces of two layer cylinderical sample is mathematically analyzed by means of Green's function for axially symmetric pulse heating on the front of samples. The solutions are applied to determine the unknown thermal diffusivity of the two materials and analyzed the measurement error due to heat loss and finite pulse time effects.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.8
• /
• pp.338-348
• /
• 2001

A hybrid self-hearing motor, which Is a functional combination of general permanent magnet (PM) motor and hybrid active magnetic bearing(AMB), was proposed a few years ago. In this paper the hybrid self-bearing motor is modified to a disk type, in which one of two magnetic hearings was substituted for a thin yoke to make the system more compact. An outer rotors in this self-hearing motor is actively controlled only in two radial directions while the ocher motions are passively salable owing to the disk-type structure. Main advantages of the proposed self-hearing motor are simple control mechanism, low power consumption and smart structure. Mathematical model for the magnetic force Is built wish consideration of the radial displacement of the rotor. The model helps us not only to design a levitation controller but also to expect the system performance. Some experimental results show good capability and feasibility of the Proposed self-bearing motor.