• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.11
• /
• pp.1075-1082
• /
• 2004

This research demonstrates the shock response analysis of a head disk assembly subjected to a half-sine shock pulse in the axial direction. In case of disk analysis, the numerical method presented by Barasch and Chen is used. Galerkin method is used with mode shape by numerical method. Head-suspension system is modeled as the cantilever in order to get simulation results. Simulation results of HDA are calculated by Runge-Kutta method. Finally, shock responses of head and disk are analyzed according to the change of the rotating speed of the disk.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.559-564
• /
• 2001

In order to apply into a compact and reliable centrifugal blood pump, this paper introduces a self-bearing motor in which a rotor is rotated without contact. The rotor is actively controlled in only radial directions, while the axial and tilting motions are passively stable owing to the disk-shape structure of the rotor. A prototype was made in outer-rotor type that is far better in the compactness than inner-rotor type. The prototype could be driven up to 8000 rpm with the rotor vibration under 0.12mm. The maximum cardiac output and pressure head were 9 L/min and over 200 mmHg, respectively. These experimental results show that the proposed self-bearing motor has sufficient performance for application to a real blood pump.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1513-1520
• /
• 2000

Complex modal testing method for rotating disks with support motion is introduced which handles the pairs of two point excitation and responses of the disk as complex input and output, respectively. This method utilizes the directivity information and the separation over the rotational speed of forward and backward traveling wave modes or bending coupled modes in the directional frequency response functions(dFRFs). This method synthesizes the normal/reverse dFRFs and complex wave dFRF, which were originally applied to rotating shaft and rotating disk, respectively, and is applied to complex system with dynamically coupled rotating disks and shaft. Experiments with a commercial hard disk drive spindle system demonstrate the validity of this method.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.1029-1035
• /
• 1999

This paper relates to the flexural vibration analysis of slender spindle systems with multiple thin disks, supported by the ball bearings by means of the finite element method. Each system component is analytically modeled taking into account its flexibility and also the centrifugal effect especially for the disk. In order to show the rapid convergence rate and accuracy of the proposed approach, an experimental set-up is built to be versatile. In two distinct cases, its natural modes are numerically computed using only a small number of total element meshes as the shaft rotational speed is varied, and verified through experimental frequency response function obtained by the impact test.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.9 s.102
• /
• pp.1045-1052
• /
• 2005

Tn this paper. dual rotor disk configuration with a coreless stator is proposed for the Lorentz force type integrated motor hearing system. An experimental compensation for the effects of high order harmonics is performed using the digital controller of the experimental setup. The runout profile and rotor unbalance are also identified by the extended influence coefficient method. The experimental results confirm that this compensation scheme effectively attenuates the rotor vibration all over the operating range of rotational speed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.392-395
• /
• 2006

The configuration of coaxial co-rotating contained in shroud provides a useful model for investigating the characteristics of flow in the HDD. Reynolds number is defined as $Re_R={\Omega}{R_o}^2/{\upsilon},\;Re_H={\Omega}R_oH/{\upsilon}$ in present study. An experimental investigation was performed for turbulence profiles and PSD distribution and vortices frequency behavior for various range of $Re_R=2.43{\times}10^4{\sim}3.61{\times}10^5$. A laser Doppler anemometry (LDA) is used to obtain the velocity field of unobstructed co-rotating disks flow. Airflow pattern visualization between inner and outer region was compared with turbulence profiles measured from LDA. Outer detached shear layer and dead-zone without oscillating velocity fluctuation to circumferential mean were quantitively traced.

• Journal of KSNVE
• /
• v.5 no.2
• /
• pp.163-168
• /
• 1995

A criterion for the selection of spindle motor speeds in a hard disk drive (HDD) is investigated to guarantee stability and reduce nonrepeatable runout of a spining disk. Since the natural frequencies of the spining disk and the forced frequencies generated from the spindle motor depend on the rotating speed, careful consideration should be taken to avoid the resonance between the disk and motor. To do this, the natural frequencies of the spining disk are calculated and they are compared with the forced frequencies from the spindle motor.

• Journal of Urban Science
• /
• v.10 no.1
• /
• pp.11-20
• /
• 2021

In this study, the vibration characteristics were theoretically analyzed by modeling a free isotropic rotating disk with an outer periphery with a fixed inner periphery, paying attention to disks used as storage devices for information devices, especially magnetic disks, magneto-optical disks, and compact disks in which the head and disk are non-contact. Iluminate with Composite materials represented by fiber-reinforced plastics (FRP) have high specific strength (strength/density) and specific stiffness (narrowness/density). It is used in the elements, and its use is rapidly expanding. Under this circumstance, the disk currently manufactured using an isotropic material made of various plastic materials such as aluminum or polycarbonate as a base material is an extremely anisotropic material made of a composite material, and the circumferential stiffness of the disk is made of reinforcing fibers in the circumferential direction. It is modeled as an anisotropic rotating disk with increased, and its influence on the vibration characteristics is revealed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.344-349
• /
• 1995

셀구조물은 선박, 항공기, 우주선 등의 산업분야에 자주 사용되는 중요한 구조요소로서, 이에 대한 연구도 공학적 필요성에 의해 많은 연구가 진행되어 왔다. Maddox등의 Rayleigh-Ritz법, Srinivasan and Bobby의 적분방정식 기법, Petyt의 유한요소법, Irie, Henderson등의 전달매트릭스법, 그 외 Webster, Petyt and Deb Nath, Blevins, Srinivasan and Krishnan등에 의해 여러가지 해석방법의 진동해석이 행해져 왔다. 현재 주로 사용되고 있는 매트릭스 구조해석 및 진동해석 방법으로는 유한요소법과 전달매트릭스법을 들 수 있다. 유한요소법은 범용적인 해석 프로그램의 개발은 수월하지만 대규모의 선형 연립방정식의 해법에 귀착되므로, 기억용량이 큰 대형컴퓨터가 필요하고, 반면 전달매트릭스법은 기억용량이 적은 퍼스널컴퓨터로도 계산수행이 가능하나 고차의 고유진동수를 구할 경우나, 중간에 단단한 경탄성지지가 존재할 경우 등에는 수치계산상의 문제점이 지적되고 있다. 이에 대한 대책으로, 상태변수를 바꾸어 넣은 Riccati방법, 각 절점의 기지의 상태변수를 제거하는 Frontal법, 전달매트릭스와 강성매트릭스를 결합시키는 방법 등이 보고 되고 있다. 이에 자자들은 퍼스널컴퓨터 이용에 적합한 고속, 고정도의 구조해석 및 진동해석 기법으로 전달영향계수법을 제안하여, 원판구조물, 사각판구조물, 원통형 셀구조물 등의 여러가지 형상구조물의 자유진동 해석에 적용해서, 종래의 전달매트릭스법에 비해 계산정도 및 계산속도의 양면에서 매우 우수함을 보고한바 있다. 본 연구에서는 동적영향계수의 축차전달에 그 개념을 두고 있는 전달영향계수법을 좀 더 일반화시키고 체계화시키기 위하여 탄성지지를 갖는 셀구조물에 적용하여 자유진동 해석 알고리즘을 정식화한 후, 간단한 모델에 대한 수치실험을 통해서 전달 영향계수법으로 구한 해를 전달매트릭스법의 결과와 비교.검토하여 본 방법의 유용성을 확인하였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.34-41
• /
• 1991

In this study, the equations of motion of the thin annular plate with uniform thickness were derived from the classical theory of the plate. In addition the distribution of the inplane stress and the natural frequency due to the change of the ratio of the outer radius to the inner radius was presented by the analytic method using the numerical analysis. Results were compared with those from the experiment. As a result, the strain of rotating circular plate increased as the radius and rpm became greater, and the strain of radial direction was two times greater than that of transverse direction. Besides, it was confirmed that the natural frequency increased according to the decrease of the radius keeping the thickness constant.