• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.114-118
• /
• 2009

주요 일간지와 KBS 1 9시 뉴스에서 다루고 있는 건강관련 기사의 내용을 분석하여, 건강관련 정보의 경향을 파악하여, 건강 예보제 실시를 위한 현황 분석을 위해 본 연구를 실시하였다. 1. 일간지 건강정보 내용분석 결과요약: 기사 보도 분야에서는 생활건강(47.8%), 사회(14.6%), 종합(7.7%), 국제(4.7%), 경제(1.5%) 순이었고, 3/4분기에서만 국제와 경제 분야가 종합분야 보다 많이 보도 되었으며, 기타 분야가 22.9%로 많은 비율을 차지하였다. 건강정보를 대상 성별별로 분류 하였을 시 남녀 모두에 해당되는 자료가 대다수였고(87.9%), 여성이 대상인 정보(8.0%)가 남성(4.1%)보다 많았으며, 생애 주기별 대상으로 분류 하였을 시에 역시 특별히 구분되지 않은 모든 연령층에 해당 정보가 가장 많았고(60.8%), 성인(19.8%), 학동기 어린이(7.3%), 청소년 (4.9%), 노인(4.9%), 영유아(3.3%) 순이었다. 일간지별 기사의 주제를 조사한 결과 두 일간지의 총합은 병의 원인 및 위험인자(15.5%)가 가장 많이 보도 되었는데, 조선일보는 건강증진, 치료 및 술기, 투약, 기타의 순이었고, 한겨레신문은 건강증진, 행정, 치료 및 술기, 투약 순이었으며 각 주제별로 분기별로 약간의 차이를 나타내었다. 예측성에 관한 내용분석을 보면 예보성은 있는 경우(76.2%)가 없는 경우보다 많았고, 예보성의 정보는 알림성, 예측성, 행사성의 순이었고 예측성의 경우 건강형태가 가장 많았으나 한겨레 신문의 경우 기타에 속하는 경우가 가장 많았다. 사 ICD-10 체계, 21대 분류로 질병에 관한 기사를 분류한 결과 신생물(14.5%), 특정 감염성 및 기생충성 질환(13.6%), 정신 및 행동장애(9.5%)의 순이었으며 두 일간지간의 차이를 보였다. 2. TV 뉴스 건강정보 내용분석 결과요약: 건강정보의 대상 특징 성별은 모두 해당되는 경우가 265회 중 238회 (89.8%)로 가장 많았고, 생애주기별 대상으로 보면 모든 연령층에 해당 되는 것이 154회(58.1%)로 가장 많았다. 건강정보의 주제에 대해서 조사한 결과 병의 원인 및 위험인자가 73회(27.5%), 역학(역학조사 및 보도성)이 64회 (24.2%), 행정이 30회(11.3%), 증상 및 호소가 27회(10.2%) 등의 빈도순으로 조사 되었다. 건강정보의 내용의 분야를 보면 대분류로는 질병관리 분야가 102회(38.5%), 보건의료제도 및 행정 분야가 52회(19.6%), 보건행태 및 기타 42회(15.8%), 생활환경분야 39회(14.7%)의 빈도순으로 나타났다. 건강정보 내용을 질병의 분류 ICD-10 체계로 분석한 결과는 특정감염성 및 기생충성 질환 48회(26.8%), 소화기계의 질환, 손산, 중독 및 외인에 의한 특정기타 결과, 건강상태 및 보건서비스 접촉에 주는 요인 등의 빈도순으로 조사되었다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.4
• /
• pp.699-721
• /
• 1996

브로네마르크가 골유착성 임플랜트를 소개한 이래로, 현재 골유착성 임플랜트에 의한 치료는 안전하고 안정적인 방법으로 여겨지고 있다. 골유착성 임플랜트를 이용한 초기의 치료는 무치악 환자의 저작기능 회복에 중점을 두어 왔다. 그러나 현재는 환자와 시대의 요구에 따라서 심미성이 주요한 관심사가 되었다. 그래서 표준 지대주보다 더 심미적인 지대주 시스템들이 개발되었다. 다양한 직경의 임플랜트 고정체에 관한 임상가들의 요구에 의해 직경 이 큰 고정체가 생산되기 시작했으며, 5mm의 직경을 갖는 고정체가 그 예이다. 골유착성 임플랜트를 사용하여 보철치료를 할 때, 골과 고정체의 계면은 보철물과 지대주에 가해지는 교합력을 인접골에 전달하게 되며, 이것은 계면에 생물학적인 반응을 야기할 수 있다. 임플랜트의 형태는 골흡수와 같은 바람직하지 않은 반응을 일으키지 않도록 고안되어야 하며, 임플랜트 자체가 교합력을 견딜 수 있어야 한다. 그러므로 골유착성 임플랜트 시스템을 임상에 사용하려고 할 때 이것의 생역학적 분석은 반드시 필요하다. 본 연구에서는 삼차원 유한요소분석적 방법을 사용하여 3.75mm직경을 갖는 고정체에 표준 지대주, 이세티콘 지대주, 마이러스콘 지대주를 연결한 모델과 5mm 직경을 갖는 고정체에 표준 지대주를 연결한 모델에 각각 수직하중, 경사하중, 수평하중을 가했을 때의 응력분포를 비교하였다. 본 연구의 결과는 다음과 같다. 1. 모든 모델에서 금나사의 경부, 금원주, 지대주에 응력의 집중이 일어났다. 2. 임플랜트 고정체에서는 고정체 상방 2/3, 그리고 지대주와 접촉하는 고정체 상면에서 응력의 집중이 관찰되었다. 3. 골에서는 상부 피질골에 응력의 집중이 관찰되었으며, 해면골에서는 두드러진 응력의 집중을 보인 부위는 없었으나 고정체의 근단부 주위 해면골에서의 응력값이 비교적 높았다. 4. 5mm 직경의 고정체를 사용하지 않은 모델 중에서, 표준 지대주를 사용한 경우가 가장 응력분산에 유리하였으며 마이러스콘 지대주를 사용한 경우가 가장 불리하였다. 5. 3가지 하중 조건하에서 수평하중과 경사하중의 경우가 수직하중의 경우보다 더 높은 응력값이 관찰되었다. 6. 응력값은 골에서보다 임플랜트 내부에서 훨씬 높았다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.766-773
• /
• 2021

Chemicals, such as ammunition, are disposable items that cannot be reused because of their operational characteristics. The reliability of the test process and test results are important factors in evaluating the performance of guns and ammunition. The pressure after firing is a crucial value in an acceptance test of guns and ammunition performance; hence, accurate measurements are required. The pressure in the artillery is measured using the copper crusher gauge. The compression amount of copper is converted into a pressure by either a length-pressure conversion table or conversion formula. Therefore, the exact measurement of the squeeze of the copper crusher is related directly to the correct estimate of the pressure. Currently, the pressure is measured manually by the operator, which always includes some human error. In this study, the cause of the measurement error was analyzed, and the automatic measuring system for copper crusher deformation was developed to minimize the error elements. A copper crusher could be measured using the probe sensor and CCD camera, and the Jig for stable positioning was also designed. A designated SW was also developed for the system operating and measurement-analysis. This measuring system through this study may be used for an ammunition stockpile reliability test and gun/ammunition acceptance test.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.545-552
• /
• 2021

Under the Act amended on August 4, 2011, a special fire-fighting investigation was conducted by the relevant person (owner, manager, oil refineries), and the responsibility was also given to the relevant person. Instead of directly entering all existing fire-fighting targets and investigating the maintenance and management status of fire-fighting facilities, the fire-fighting agency selects and visits some targets every year, checks the maintenance and management status of fire-fighting facilities, corrects them, and imposes fines, etc. Reasons for the introduction of the system were the establishment of a private autonomous correction system by strengthening the responsibility of officials, lack of firefighting professionals, possible corruption due to frequent public contact, and responsibility of fire agencies. However, many problems arose even after the introduction of a special fire investigation system. A special fire investigation, one of the fire safety systems, checks whether related public officials and especially fire officials are properly installed, maintained and managed in accordance with relevant laws. Special firefighting investigations were introduced as firefighting inspections at the time the firefighting law was enacted in 1958, and have undergone a revised process more than 30 times until recently. Firefighting Facility Installation, Maintenance and Safety Management Act", the existing firefighting inspection was changed to a special firefighting investigation and accepted. At the time of enactment of the Fire Service Act in 1958, a special firefighting investigation was introduced as a firefighting inspection, and until recently, more than 30 revisions have been made. In 2003, as the existing fire fighting system was divided into four laws, it was approved by changing the existing fire fighting inspection to a special fire fighting investigation in the "Fire Fighting Facility Installation, Maintenance and Safety Management Act".

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.667-674
• /
• 2022

In this study, the correlation between the damage type and operating conditions of the sleepers was analyzed based on the design data and visual inspection results for the concrete sleepers of the sleeper floating track (STEDEF) that have been in operation for more than 20 years. It appeared in the form of cracks, breakages, and breaks in the concrete at the center and tie bar contact and buried areas. As a result of the numerical analysis, it was analyzed that the change in the left and right spring stiffness of the sleeper resilience pad increases the maximum stress, tensile stress, compressive stress, and displacement of the concrete sleeper, and stress concentration in the concrete at the tie bar contact area. It was proved analytically that the sleeper resilience pad can affect the damage of the concrete sleeper. Therefore, damage of concrete sleepers in the sleeper floating track in urban transit could be caused by changes in spring stiffness of sleeper resilience pads. It was reviewed that preventive maintenance such as improvement and timely replacement of sleeper resilience pads was necessary.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.2
• /
• pp.419-427
• /
• 2024

This study assessed the potential impact of gas leakage resulting from accidental damage to buried urban gas pipelines during perforating operation near subway construction sites. The risk of explosions due to ignition sources such as static electricity, arising from gas infiltrating the subway construction site through storm sewers and sewage pipes, was evaluated using the ALOHA program. The results of the threat zone calculation, which input various parameters of urban gas pipelines such as length, diameter, and pressure, indicated that the flammable area within the vapor cloud extended from 1.2 to 1.4 km (red zone), the blast area ranged from 0.8 to 1.0 km (yellow zone), and the jet fire extended from 45 to 61 m (red zone). This study demonstrates that within the flammable area of the vapor cloud, a specific combination of concentration and conditions can increase flammability. The blast area may experience explosions with a pressure of 1.0 psi, sufficient to break glass windows. In the event of a jet fire, high temperatures and intense radiant heat exposure lead to rapid fire propagation in densely populated areas, posing a high risk of casualties. The findings are presented in terms of the sphere of influence and threat zone ranges.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.243-248
• /
• 2022

As the scope of use of portable and wearable electronic devices is expanding, the limitations of heavy and bulky solid-state batteries are being revealed. Given that, it is urgent to develop a small energy harvesting device that can partially share the role of a battery and the utilization of energy sources that are thrown away in daily life is becoming more important. Contact electrification, which generates electricity based on the coupling of the triboelectric effect and electrical induction when the two material surfaces are in contact and separated, can effectively harvest the physical and mechanical energy sources existing in the surrounding environment without going through a complicated intermediate process. Recently, the interest in the harvest and utilization of wind energy is growing since the wind is an infinitely ecofriendly energy source among the various environmental energy sources that exist in human surroundings. In this study, the optimization of the energy harvesting device for the effective harvest of wind energy based on the contact electrification was analyzed and then, the utilization strategy to maximize the utilization of the generated electricity was investigated. Natural wind based Fluttering TENG (NF-TENG) using fluttering film was developed, and design optimization was conducted. Moreover, the safe high voltage generation system was developed and a plan for application in the field requiring high voltage was proposed by highlighting the unique characteristics of TENG that generates low current and high voltage. In this respect, the result of this study demonstrates that a portable energy harvesting device based on the contact electrification shows great potential as a strategy to harvest wind energy thrown away in daily life and use it widely in fields requiring high voltage.

• Korean Journal of Plant Resources
• /
• v.21 no.1
• /
• pp.1-4
• /
• 2008

The clonal variation in female flowering was studied in Larix leptolepis clone bank, consisting of 116 clones, for three years. The between-year variation was large; i.e. the percentage of flowering grafts and average number of flowering per graft were $28.4{\sim}67.2$ and $9{\sim}176$, respectively. Differences in flowering abundance among clones were large and statistically significant in all the years studied. The variance of flowering abundance among clones was increased when flowering was poor. The average of broad-sense heritability of flowering abundance was 0.52. The genetic gain(%G) was estimated at 57.4% when the upper 30% clones were selected. The clonal stability of flowering abundance was compared using average number of flowering and coefficient of variance value of each clone. The clones such as Gyeonggi 9(29), Kangwon 37(137), Chungnam 6(46), Chungnam 14(414), R11, R8 showed abundant flowering and high stability.

• Korean Security Journal
• /
• no.39
• /
• pp.161-183
• /
• 2014

The job burnout of the private security guards who provide services through contact with customers can affect the overall the private security industry. So the managers need to make efforts to diagnose and evaluate the job burnout and provide continuous provision for the repatriation effect. However, up to the present, the job burnout measure for the private security guards has not been provided, so the objectivity of the information is questionable. For this reason, in order to establish the goodness of fit of the job burnout scale for private security guards based on the contents of the job burnout scale that was being provided to other service employees, this research aims to provide the scale to provide objective information compared with that of the past by applying the Rasch model of the item response theory. To achieve this purpose, the data on 379 private security guards working for the private security guard companies in the Gyeonggi region were collected, and the data were processed to suit the research purpose using SPSS 18.0 and AMOS 18.0, Winsteps programs. Through these research procedures, the following conclusion was obtained. With regard to the private security guards' measure of job burnout, as a result of factor analysis through the collected data, 4 questions were deleted, and as a result of the analysis of the goodness of the fit based on 18 questions, 4 questions were found to be inappropriate questions that did not satisfy the standard value, and the scope of the difficulty level of the questions from - 98 to 1.30 and the response reaction of a 5-point scale were found to suit the final private security guards' job burnout scale. In other words, the conclusion that it is appropriate to measure the private security guards job burnout scale with 3 factors and 13 questions was obtained. So if private security guards companies collect systematic data using the scale established in this research, and practice refresher training accordingly, they can reduce the private security guards' job burnout.

• Korean Journal of Environment and Ecology
• /
• v.30 no.3
• /
• pp.406-414
• /
• 2016

This study examined the factors by which people choose auto-camping as their primary leisure activity after conducting a questionnaire survey of the visitors to the Chiaksan national park Guryong auto-campground. The majority of the visitors were employed (60%) in their 30s and 40s (85%) with relatively high education (88% of which had bachelor's degree or higher) and income levels (87% of which had family income greater than KRW30 million). Most visitors were family group visitors (82%), and for many visitors, auto-camping appeared to be their primary leisure activity as 24% of the respondents said that they visited auto-campground more than 10 times a year. Only 18% of the visitors had auto-camped for longer than 5 years, indicating that auto-camping is a relatively new leisure activity that has become popular in recent times. Factor analysis with 19 items that measured the degree of agreement on the relative advantages of auto-camping extracted four latent factors that affected the selection of auto-camping as a leisure activity: factor 1 (refreshment through contact with nature), factor 2 (novelty and a sense of accomplishment), factor 3 (convenience), and factor 4 (entertainment). Results of regression analysis that examined the effects of the four extracted factors on the visitors' level of satisfaction on auto-camping (measured by the number of visits to auto-campgrounds per year) indicated that 'refreshment through contact with nature' was the most critical factor when deciding to select auto-camping as their leisure activity. 'Novelty and a sense of accomplishment' and 'convenience' were also statistically significant -but to a lesser degree, whereas 'entertainment' did not statistically significantly affect the visitors' decision. These results suggest that, for designing and managing auto-campgrounds, it is more important to preserve the surrounding nature than to provide more facilities for campers' convenience and entertainment.