• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.5
• /
• pp.513-523
• /
• 2016

The stress concentration factors and stress intensity factors for a simple beam and a cantilever are analyzed by using finite element method and phtoelasticity. Using the analyzed results, the estimated graphs on stress concentration factors and stress intensity factors are obtained. To analyze stress concentration factors of notch, the dimensionless notch length H(height of specimen)/h=1.1~2 and dimensionless gap space r(radius at the notch tip)/h=0.1~0.5 are used. where h=H-c and c is the notch length. As the notch gap length increases and the gap decreases, the stress concentration factors increase. Stress concentration factors of a simple beam are greater than those of a cantilever beam. However, actually, the maximum stress values under a load, a notch length and a gap occur more greatly in the cantilever beam than in the simple beam. To analyze stress intensity factors, the normalized crack length a(crack length)/H=0.2~0.5 is used. As the length of the crack increases, the normalized stress intensity factors increase. The stress intensity factors under a constant load and a crack length occur more greatly in the cantilever beam than in the simple beam.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.532-544
• /
• 2023

Purpose: To identify and evaluate the risk of chemical fire causative substances by using thermal analysis methods (DSC, TGA) for the hazards and physical property changes that occur when newly used biofuels are mixed with existing fuels It is to use it for identification and evaluation of the cause of fire by securing data related to the method and the hazards of the material according to it. Method: The research method used in this experiment is the differential scanning calorimeter (DSC: Difference in heat flux) through quantitative information on the caloric change from the location, shape, number, and area of peaks. flux) was measured, and the weight change caused by decomposition heat at a specific temperature was continuously measured by performing thermogravimetric analyzer (TGA: Thermo- gravimetric Analyzer). Result: First, in the heat flux graph, the boiling point of the material and the intrinsic characteristic value of the material or the energy required for decomposition can be checked. Second, as the content of biodiesel increased, many peaks were identified. Third, it was confirmed through analysis that substances with low expected boiling points were contained. Conclusion: It was shown that the physical risk of the material can be evaluated by using the risk of biodiesel, which is currently used as a new energy source, through various physical and chemical analysis techniques (DSC + TGA).In addition, it is expected that the comparison of differences between test methods and the accumulation and utilization of know-how on experiments in this study will be helpful in future studies on physical properties of hazardous materials and risk assessment of materials.

• 한국지구과학회:학술대회논문집
• /
• 2005.09a
• /
• pp.199-206
• /
• 2005

지구과학은 실생활과 직접적으로 관련되거나 학생들이 친숙하게 생각하는 많은 개념들을 포함하고 있으며 이런 특성은 과학캠프나 자연탐사 활동에서 지구과학과 관련한 탐구주제가 학생들의 큰 호응을 얻는 사실을 설명할 수 있다. 하지만 정규 수업에서 이루어지는 지구과학 실험 수업은 교과서에 제시된 자료해석 위주의 실험이 많아 학생들의 흥미를 반감시키는 경우가 많으며 자료 측정과정에서 과학자가 느낄 수 있는 중요하고 귀중한 경험을 놓칠수 있다. 그런데 인터넷에서는 해양과 대기, 천문, 지질 각 분야에서 지속적으로 갱신되는 실시간 관측 자료를 제공해 주는 곳이 많으며 이 실시간 자료들을 고등학교의 지구과학 실험에 이용할 수 있도록 학습 프로그램을 개발하면 기존의 자료해석 실험이 가지는 한계를 극복하고 학생들의 지구과학에 대한 호응도를 높일 수 있으며 보다 다양한 탐구 능력을 향상 시킬 수 있다. 이러한 학습 프로그램의 특징은 탐구 중심 혹은 문제 해결 학습을 강조하는 현재의 교육 목표를 잘 반영할 수 있다. 본 연구의 목적은 인터넷에서 제공되는 지구과학 관련 실시간 자료들을 활용할 수 있는 고등학교 지구과학 학습 프로그램을 개발하고 이를 지원할 수 있는 홈페이지를 구축한 후 실제로 수업에 적용하여 교육적 효과를 확인하는 것이다. 연구 결과 실시간 자료를 이용하는 고등학교 학생들을 위한 지구과학 학습 프로그램을 12개의 주제에 대해서 완성했다. 먼저 지구과학실험 시간에 적용할 수 있는 2차시 분량의 학습 프로그램 6주제를 개발했는데 개발 주제는 '지진이 일어나고 있는 곳은 어디인가?', '진앙으로 판의 경계를 결정하기', '진앙의 위치를 찾아라', '암영대를 찾아라', '태양의 자전 주기를 측정하기', '태양활동' 이다. 각 주제별로 수업소개, 학습목표, 과정, 학습자료(학생 활동지, 기타 자료, 수업 내용과 관련한 실시간 자료 제공 사이트 목록), 평가 자료를 만들었다. 학생들의 활동 내용은 <지진이 일어나고 있는 곳은 어디인가?>의 주제를 예로 들면 학생들이 실시간으로 전 세계의 지진활동을 모니터하는 사이트에 접속하여 최근에 지진이 어디에서 일어났는지 알아보고 지난 30일 동안에 일어났던 규모 4 이상의 지진 자료를 다운 받아 세계 지도에 점으로 표시한다. 이 때 학생들은 손으로 진앙의 위치를 지도에 그리는 대신 엑셀의 그래프 기능을 이용하여 지도에 진앙의 위치를 나타내게 한다. 또 개인 과제 연구에 적용할 수 있는 학습 프로그램을 5가지 개발하여 학생들이 특정한 주제에 대하여 탐구 과제를 수행할 수 있게 했는데 개발된 주제는 '태양 활동으로 오로라 예측하기', '국제 우주 정거장을 찾아내자', '한반도 부근의 해양 기상과 해수의 물리적 상호 관계', '일기도 분석을 통한 태풍의 진로 예측', '우리 나라 조석 예측' 이다. 마지막으로 사이버 학습을 통해서 수업 시간의 제약 없이 과제 형태로 처치 가능한 학습 프로그램 개발 했는데 그 주제는 '태풍이 저위도에서 북상하는 이유?'이다. 개발된 프로그램 중 2차시 학습 프로그램은 과학고 중학생 영재반에게, 개인 탐구 과제는 과학고 1학년 학생들에게, 사이버 수업 형태는 과학고 2학년 학생에게 적용시켰다. 실시간 자료 활용을 지원하는 홈페이지를 만들어 자료 제공 사이트에 대한 메타 자료를 데이터베이스화했으며 이를 통해 학생들이 원하는 실시간 자료를 검색하여 찾을 수 있고 홈페이지를 방분했을 때 이해하기 어려운 그래프나 각 홈페이지가 제공하는 자료들에 대한 처리 방법을 도움말로 제공받을 수 있게 했다. 실시간 자료들을 이용한 학습은 학생들의 학습 의욕과 탐구 능력을 향상시켰으며 컴퓨터 활용 능력과 외국어 자료 활용 능력을 향상 시키는데도 도움을 주었다.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.10
• /
• pp.17-28
• /
• 1999

In this paper, an ASIC emulation system called ACE (ASIC Emulator) is proposed. It can produce the prototype of target ASIC in a short time and verify the function of ASIC circuit immediately The ACE is consist of emulation software in which there are EDIF reader, library translator, technology mapper, circuit partitioner and LDF generator and emulation hardware including emulation board and logic analyzer. Technology mapping is consist of three steps such as circuit partitioning and extraction of logic function, minimization of logic function and grouping of logic function. During those procedures, the number of basic logic blocks and maximum levels are minimized by making the output to be assigned in a same block sharing product-terms and input variables as much as possible. Circuit partitioner obtain chip-level netlists satisfying some constraints on routing structure of emulation board as well as the architecture of FPGA chip. A new partitioning algorithm whose objective function is the minimization of the number of interconnections among FPGA chips and among group of FPGA chips is proposed. The routing structure of emulation board take the advantage of complete graph and partial crossbar structure in order to minimize the interconnection delay between FPGA chips regardless of circuit size. logic analyzer display the waveform of probing signal on PC monitor that is designated by user. In order to evaluate the performance of the proposed emulation system, video Quad-splitter, one of the commercial ASIC, is implemented on the emulation board. Experimental results show that it is operated in the real time of 14.3MHz and functioned perfectly.

• Journal of the Korean Chemical Society
• /
• v.18 no.3
• /
• pp.202-209
• /
• 1974

Polarographic behaviors of copper and cadmium complexes with 2,2'-bipyridine and ethylenediamine in acetonitrile have been investigated by the DC and AC polarography. The reduction processes are estimated as follows; $Cu(II)-bipy. \;complex\;{\longrightarrow^{e^-}_{E_{1/2}\risingdotseq+0.1V}}\;Cu(I)-bipy.\;complex\;{\longrightarrow^{e^-}_{E_{1/2}=-0.43V}}\;Cu(Hg)$$Cu(II)-en.\;complex\;{\longrightarrow^{e^-}}\;Cu(I)-en.\;complex\;{times}\;{\longrightarrow^{e^-}_{E_{1/2}=-0.56V}}\;Cu(Hg)$$Cu(II)-bipy. \;complex\;{\longrightarrow^{e^-}_{E_{1/2}=-0.57V}}\;Cu(I)-bipy.\;complex\;{\longrightarrow^{2e^-}_{E_{1/2}=-0.97V}}\;Cd(I)-bipy\;complex$$Cu(II)-en.\;complex\;{\longrightarrow^{e^-}_{E_{1/2}=+0.05V}\;Cu(I)-en.\;complex{\longrightarrow^{e^-}_{E_{1/2}=-0.92V}}\;Cu(Hg)$ The limiting currents of all steps are controlled by diffusion. The number of ligand and the dissociation constant for Cu(Ⅰ)-bipy. complex were found to be n = 2 and $K_d=(1.5{\pm}0.1){\times}10^{-7}$, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.181-188
• /
• 2012

The present study on nitrogen-diluted non-premixed counterflow flames with finite burner diameters experimentally investigates the important role of the outer edge flame in flame extinction. Flame stability diagrams mapping the flame extinction response of nitrogen-diluted non-premixed counterflow flames to varying global strain rates in terms of the burner diameter, burner gap, and velocity ratio are explored. There exists a critical nitrogen mole fraction beyond which the flame cannot be sustained, and also the curves of the critical nitrogen mole fraction versus the global strain rate have C-shapes in terms of burner diameter, burner gap, and velocity ratio. In flames with sufficiently high strain rates, the curves of the critical nitrogen mole fractions versus global strain rate collapse into one curve, and the flames can have the 1-D flame response of typical diffusion flames. Three flame extinction modes are identified: flame extinctions through the shrinkage of the outer edge flame with and without an oscillation of the outer edge flame prior to the extinction and flame extinction through a flame hole at the flame center. The measured flame surface temperature and a numerical evaluation of the fractional contribution of each term in the energy equation show that the radial conductive heat loss at the flame edge destabilizes the outer edge flame, and the conductive and convection heat addition to the outer edge from the trailing diffusion flame stabilizes the outer edge flame. The radial conductive heat loss at the flame edge is the dominant extinction mechanism acting through the shrinkage of the outer edge flame.

• Analytical Science and Technology
• /
• v.16 no.1
• /
• pp.32-38
• /
• 2003

The rapid and sensitive determination method of sildenafil and its related compounds (Vardenafil, Homosildenafil, Tadanafil.) has been investigated using high performance thin layer choromatography (HPTLC). Optimizing separation conditions and simultaneous determination method of these compounds were studied. The calibration curves of those compounds at 254 nm was found to be linear in the range of $1.0{\sim}56.5{\mu}g/mL$, respectively. The detection limts (LOD) and quantification limits (LOQ) of these were found to be $0.8{\sim}1.8{\mu}g/mL$ and $1.0{\sim}2.3{\mu}g/mL$. The coefficient of variation (C.V.) were less than 2.5%. Finally, the present method was applied to determine sildenafil and its related substances in dietary supplement.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.413-418
• /
• 2019

Studies are now actively underway to confirm the degree of treatment and rehabilitation of patients with brain-related diseases (dementia, schizophrenia, depression, Parkinson's disease). Among them, Transcranial magnetic stimulation (TMS) is widely used in treatment because it is a technique that is used for noninvasive brain neuron control in patients with brain disorders. It can be seen that muscle fatigue of normal people increases during Transcranial magnetic stimulation. Therefore, in this paper, our purpose is to build an EMG measurement system to measure motor neuron-induced response during transcranial magnetic stimulation and We identify a motor-neutral response system using tendency in the RMS graph. As an experimental method, the Raw Data received through the surface EMG device and analyzed by RMS technique, after the contraction and relaxation movement of the biceps brachii. As a result of the experiment, we confirmed the trend of rising RMS graph, and it will can be used to determine the self-stimulation intensity for each individual in consideration of the data of the motor-neutral response.

• Journal of the Korean Regional Science Association
• /
• v.37 no.1
• /
• pp.45-61
• /
• 2021

This research purposes to design a methodological framework to suggest the optimal method to resolve the conflicts of stakeholders surrounding the water use charge of the Han River region, and to use the analysis results to provide the direction of policy. For this, it was preceded that the process of understanding the mechanisms of the multifaceted conflict between decision makers taking different positions over water use charge of the Han River region, and an optimal method to resolve the conflict of water use charge of the Han River region was derived by using a graph model for conflict resolution(GMCR). According to the analysis results, the optimal state to find a solution to the water use charge of the Han River is that the Seoul-Incheon-Gyeonggi region pays the charge according to the original rate while Seoul-Incheon requesting discount the water use rate. In addition, the Han River management committee should establish policies desired by Seoul-Incheon-Gyeonggi region including rationalization of the decision-making structure to determine the rate of water use charge, making the basis to support the Han River management fund system for the Seoul-Incheon region, and transparent management of the Han River management fund system considering the characteristics of beneficiary regions and residents. This study is expected to provide objective decision-making information in establishing environmental policy directions related to conflict resolution in the water use charge of the Han River region and to offer a methodological basis for similar follow-up studies related to conflicts derived from sharing nature environment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.1
• /
• pp.58-64
• /
• 2024

Approximately 250 marine oil spill accidents have occurred in Korea, with profound impact on local communities and the environment. The restoration process necessitates significant resources and costs to return affected areas to their pre-accident state. In accordance with the polluter pays principle, compensation is demanded from polluter, as stipulated in both international conventions and national laws. Consequently, investigations are conducted to determine civil and criminal liability. As the importance of investigation actors in oil spill accidents increases, standards such as CEN 15522-2 and ASTM D 3248 are employed to determine the similarity between the spilled oil and the oil of the suspected ship. Among these standards, CEN 15522-2, the most actively used European standard, underwent its third revision and is now known as EN 15522-2, as of 2023. This study used EN 15522-2 to analyze samples from marine oil spill accidents that occurred in Korea. The results indicated that, considering the characteristics of domestic spills where light fuel oil spills account for more than 40%, the application of EN 15522-2, which includes low-boiling point substances such as Adamantanes, was confirmed to be highly effective.