• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.283-284
• /
• 1995

삼성종합기술원의 음성 인식, 합성 분야의 음성 데이터 베이스 구축 현황과 향후 연구 방향에 대하여 기술한다. 삼성종합기술원에서는 1989년 한국어 문음 변환기술 개발을 시작하여 그 동안 남성음, 여성음 합성 시스템을 발표하였고, 최근에는 시각장애자용 컴퓨터를 개발하여 전국 13개 시각 장애자 학교에 기정한 바 있다. 음성 인식 분야는 100 단어 내외으 소용량 화자 종속 시스템을 개발하여 키폰용 음성인식 다이얼 장치를 실용화하였다. 약 5년여에 걸친 연구 결과 자체적으로 구축하게 된 음성 DB는 크게 남, 여 합성용 DB와 인식용 DB로 요약할 수 있다. 이러한 경험을 바탕으로 향후 국내외 대학, 연구소 등과 공동연구를 통해 상품화 수준의 문음 변환기술과 대용량, 화자독립 음성인식 시스템을 개발하고자 한다. 궁극적으로는 휴대용 통역기의 요소 기술을 확보하여 제한된 영역에서 자동 통역기를 상품화하는데 이바지할 계획이다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04a
• /
• pp.503-505
• /
• 2003

현재 인터넷을 통한 상대방의 신뢰성을 보장해 주는 인증서 사용이 빈번해지고 있다. 그러나 오프라인상의 전자문서는 상대방의 신뢰성 보장과 전자문서의 위변조의 위험성이 많다. 또한 전자문서는 오프라인상의 이동성에 제악을 받게 된다. 본 논문에서는 이러한 문제를 해결하고, 사용자가 온라인과 오프라인에서도 사용하게 편리하도록 문서내용, 문서작성자의 인증서 그리고 전자서명값을 이차원 바코드로 변환하여 출력된 전자문서에서 상대방의 신뢰성과 문서의 무결성을 보장하도록 제안한다. 제안된 시스템에서는 문서내용, 문서작성자의 인증서, 전자서명값을 변환해 출력문서에 이차원 바코드를 첨부하게 된다. 출력된 문서에서 첨부된 이차원 바코드를 스케닝 하고 문서내용, 문서작성자의 인증서 그리고 전자서명값을 얻어오고 검증을 통해 위변조 여부 판단하여 상대방의 신뢰성과 문서의 무결성을 확인 하도록 한다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.548-549
• /
• 2012

본 논문은 가정용 8kWh 에너지 저장 시스템(ESS; Energy Storage System)을 제안한다. 제안하는 시스템은 신재생 에너지원으로 태양광, 에너지저장 장치로는 리튬 배터리가 적용되는 시스템으로, 단상 계통과 병렬로 연결되어 태양광 및 배터리의 직류전력을 상용 주파수 및 전압의 교류전력으로 변환하는 제어가 가능하며 또한, 계통의 교류전력을 배터리에 필요한 직류전력으로 변환하는 양방향 시스템이다. 제안하는 ESS의 제어 및 모니터링을 위하여 추가로 HMI(Human Machine Interface) 및 HMI 제어기를 사용하였다. HMI는 ESS를 원하는 형태로 동작시킬 수 있으며, 현재 시스템의 동작모드, 전력량, 배터리 정보 등의 표시 및 장애 이력을 관리한다. 그리고 HMI, PCS, 및 BMS는 서로 CAN통신으로 정보를 교환하도록 설계하였다.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.10
• /
• pp.22-29
• /
• 1998

In this paper, an 10 bit current-mode CMOS A/D converter with a current predictor is designed with a CMOS process to be integrated into a portable image signal processing system. A current predictor let the number of comparator reduce to 70 percent compared with the two step flash architecture. The current magnitude of current reference is reduced to 68 percent with a modular current reference. The designed 10 bit Low-power current-mode CMOS A/D converter with a current predictor is simulated with HSPICE using 0.6$\mu\textrm{m}$ N-well single-poly triple-metal CMOS process parameters. It results in a conversion rate of 10MSamples/s. A power consumption is measured to be 94.4mW at single +5V supply voltage. The 10 bit A/D converter fabricated using the same process occupies the chip area of 1.8mm x 2.4mm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8C
• /
• pp.689-696
• /
• 2010

The goal of this paper is to present a novel method for protecting digital image using 2-D cellular automata transform (CAT). A copyright and transform coefficients are used to generate a new content-based copyright and an original digital image is distributed without any hidden copyright. The parameter, which is called gateway value, for 2-D CAT is consisted of rule number, initial configuration, lattice length, number of neighbors, and etc. Since 2-D CAT has various gateway values, it is more secure than conventional methods. The proposed algorithm is verified using attacked images such as filtering, cropping, JPEG compression, and rotation for robustness.

• Korean Journal of Remote Sensing
• /
• v.13 no.2
• /
• pp.85-98
• /
• 1997

A geometric model of pushbroom-type linear CCD camera images is proposed in this paper. At present, this type of cameras are used for obtaining almost all kinds of high-resolution optical images from satellites. The proposed geometric model includes not only a forward transformation which is much more efficient. An inverse transformation function cannot be derived analytically in a closed form because the focal point of an image varies with time. In this paper, therefore, an iterative algorithm in which a focal point os converged to a given pixel position is proposed. Although the proposed model can be applied to any pushbroom-type linear CCD camera images, the geometric model of the high-resolution multi-spectral camera on-board KITSAT-3 is used in this paper as an example. The flight model of KITSAT-3 is in development currently and it is due to be launched late 1998.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.5
• /
• pp.93-103
• /
• 2005

In this paper, we propose a RST resistant robust logo embedding technique for multimedia copyright protection Geometric manipulations are challenging attacks in that they do not introduce the quality degradation very much but make the detection process very complex and difficult. Watermark embedding in the normalized image directly suffers from smoothing effect due to the interpolation during the image normalization. This can be avoided by estimating the transform parameters using an image normalization technique, instead of embedding in the normalized image. Conventional RST resistant schemes that use full frame transform suffer from the absence of effective perceptual masking methods. Thus, we adopt $8\times8$ block DCT and calculate masking using a spatio-frequency localization of the $8\times8$ block DCT coefficients. Simulation results show that the proposed algorithm is robust against various signal processing techniques, compression and geometrical manipulations.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.253-260
• /
• 2007

A multimedia converter is used to create media suitable for own environment. If the data complying with own demands can not be created, it may accompany with a problem that has to convert the data with another transcoder. In addition, conventional converters do not consider source QoS and target QoS sufficiently, meaning that users should have a significant knowledge base about various media in order to obtain desired results. These problems become limits on the UMA(Universal Multimedia Access) environment. In this paper, we create a suitable transcoding path before performing the Digital Item conversion in consideration of source QoS and target QoS. The created transcoding path performs the adaptive transcoding using unit exchanges featuring connectivity. The consideration of QoS allows users to use the multimedia easily. Since the proposed model, in addition, use the unit transcoder, it provides a excellent adaptive capability for new QoS.

• Journal of Digital Contents Society
• /
• v.9 no.2
• /
• pp.341-348
• /
• 2008

As a high-speed growth of internet infrastructure and a fast supply of digital imaging devices, a digital image contents industrialization is growing fast. Digital image contents are represented as digitalized images for recognition by the computer. This paper proposes the customized stock image contents management system for digital image contents developers and UCC contents producers. For automatic batch management of image contents, we design the system using the techniques of stock image meta-data conversion to want, image contents format conversion to want and selective image contents uploading to want. Furthermore, constructed system can be embedded to a system easy and fast. It provides efficient work environment as appling conventional systems and contributes for user-friendly interface construction.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.165-169
• /
• 2014

Digital load is increasing suddenly for various reasons, such as easy control and management. Accordingly, a consumption pattern of load is becoming DC. However, the power supply is supplied by AC power. The load power supply substantially needs DC power. AC power has to be converted to DC power. Renewable energy sources like solar, wind, fuel cells are DC power generation, but the transfer needs to through by AC power, thus DC power has to be converted to AC power. Resultantly, a multi-stage conversion loss is constantly increasing. The power distribution system of DC-based is required for effective use of these energy sources. This requires a DC load, as well as is necessary to develop DC ELCB which are able to detect DC leakage current for implementing protection. In this study, it realize detection algorithm about DC leakage current to verify the performance of the sensor and apply it to the ELCB which is based on DC. Therefore, it is expected to protect operating of DC power distribution system.