• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.49-58
• /
• 2010

The traffic signal controllers being used in the domestic currently are being manufactured based on the korean national police standard which was developed for controlling the quad-light traffic signal having the red, yellow, left-turn arrow, and green lights. But according to the national policy for the traffic operation, they have to be changed to be able to switch the tri-light signal having red, yellow and green lights. In this study, a new tri-light traffic signal controller was designed and developed by the way improving the Signal Control Unit of the existing quad-light standard traffic controller. The Load Signal Unit(LSU) was improved to output 6 signals which are the two assemblies of three signal indications having the red, yellow, and green lights. To enough traffic signals output to control each directional movements and the various transport modes which are car, bus, bike, and pedestrian etc., the connector bus system was designed to be able to accommodate maximum 96 signals outputs being constructed by 16 LSUs. Flasher device was developed to be able to support maximum 32 red signals. In the software, the communication protocol between traffic control center and the traffic signal controller was improved and new signal map code values were defined for the developed LSU controlling the quad-light traffic signal. A model of the quad-light traffic signal controller developed and was tested three operations, protocol-operation, remote-command and control-mode. The test result operated all of them successfully.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.27-32
• /
• 2019

This study describes the design and implementation of a simulated signal generator to demonstrate the performance of VHF band radar for the detection of small targets in RCS(Radar Cross Section). The transmission and reception antenna beam widths used in the simulated signal generating apparatus may be large, which may cause problems in the degree of isolation. Interference signal immunity and isolation characteristics are improved by considering operating conditions of VHF radar to solve isolation of antennas. Simulated signal generator performs the following: VHF radar transmission and reception correction, simulation signal generation, target Doppler, RCS and distance simulation, remote control, and GPS clock synchronization function. After the fabrication of the simulated signal generator, the main characteristics, such as the output characteristics and the reflection signal simulations, were tested. When the microwave radar assembly is completed in the future, it will be utilized for the performance evaluation of VHF radar.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.49-52
• /
• 2011

This study concerned with the retention structures or inverted temporary building for displacement measurement in the underground soil after drilling a vertical tilt sensor attached to the vertical distance required to maintain a real-time measurement and management in order to install the wireless measuring devices installed in the field through remote control and management program for the safety of retaining structures temporary building be found on the internet in real time temporary building the retention is to develop a safety management system. And based on this technology to monitor the future status of the various structures possible to add a variety of sensors and Life Cycle Prediction of the structure and needs to evolve into intelligent systems and wireless networks using wireless communications infrastructure systems based on expanding domestic market penetration by developing instrumentation pioneer in overseas markets as well as the activation can also be judged.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.86-93
• /
• 2004

This paper presents the remote measurement of the ECU signals adopted with KWP 2000 protocol using the wireless communication technique of bluetooth. The bluetooth technology will be the most promising network paradigm which can open the new area in the information technology. Especially, bluetooth module is able to link all the electrical products and personal computers to cellular phone or PDA. This research has a try to design a wireless measurement model of ECU signal based on the car telemery system using bluetooth device. In order to measure the ECU signals, we designed the interface circuits which is able to communicate between the ECU system and the terminal circuits according to the ISO, SAE regulation of communication protocol standard. A microprocessor S3c341 OX is used for the system control and communication of ECU signals. The embedded system software is programmed to measure the ECU signals using the ARM compiler and ANCI C based on Micro/OS-II kernel to communicate between two bluetooth modules using bluetooth stack. The remote measurement of ECU signals using the bluetooth was designed and implemented to evaluate the performance of wireless network to the transmit measurement data. The possibility for the remote measurement of the self diagnosis signals of ECU adopted with KWP2000 protocol verified through the developed systems and algorithms in embedded system.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10a
• /
• pp.238-243
• /
• 2006

휴대용 단말기의 보급과 인터넷 및 무선 네트워크의 발달로 사용자들이 사용하는 개별 장치들이 보편화되어 있으며, 이들을 서로 유기적으로 엮은 서비스가 등장하고 있다. 본 논문에서는 이러한 서비스의 한 종류로 U-Kiosk의 개념을 소개한다. U-Kiosk는 Kiosk 단말장치나 공용 PC를 사용자 개인의 PC처럼 사용할 수 있도록 하여 이들의 리소스를 직접 제어할 수 있는 기능을 제공한다. 이것을 실현하기 위한 방안으로 본 논문에서는 공용 PC에서 개인 PC의 바탕화면 설정을 포함해 모든 자원을 직접 사용할 수 있도록 하는 부분을 구현하고 설명을 하였으며, 인증 과정에서 사용자의 개입을 최소한으로 줄이는 방법에 대해서 소개한다. 이를 위하여 초소형 보안 단말기인 PANDA를 사용하였으며, Zigbee 통신을 사용하여 사용자의 위치정보를 파악하여 자동으로 인증을 하도록 하는 Transient Authentication의 개념을 도입하였다. 두 컴퓨터 간의 원격 접속을 위해서는 VNC를 이용하여 구현하였으며, 사용자가 공용 PC로부터 일정 거리 안에 있을 경우, 자동으로 원격 접속이 이루어지고, 공용 PC로부터 멀어질 경우 자동으로 접속이 종료되도록 구현하였다. 이를 기반으로 제안하는 U-Kiosk의 개념에 맞는 테스트 베드를 구축 하였다. 이는 UFC Project$^{2)}$의 일부로서 차후 완벽한 인증 인프라를 구축하여 보다 안정적이고 사용하기 편리한 U-Kiosk의 구현에 초석이 될 것이다.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.672-678
• /
• 2013

In this paper, with the development of Information technology, application service between IT and traditional industry has been on the rise. And there are many on-going discussions actively regarding the Air quality system based on wireless sensor network which monitor and control the aircraft environment automatically and manually with the application service of detecting harmful gas. In this paper, operation program constitute the administrator monitoring device, which collects data from sensor node of wireless sensor network and sensor node and transmits environment information to display and server. Also for remote monitoring, user operation program constitutes based on PC/smartphone. Under this, the harmful gas which is made in aircraft life is measured. Real time monitoring system based on wireless sensor network is designed and realized.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.2
• /
• pp.263-271
• /
• 1994

Automation of production in modern manufacturing is based on the integration of the various stage of production process by means of processing system. Information processing and network interface are of fundamental importance in programmable device in industrial automation, as they essential in order to active integration in production lines. In this paper, TBC(token bus controller) in the Mini-MAP board performs the function of the MAC sublayer, The LLC sublayer is implemented according to the specification of Class 3 that includes Type 1 and 3. And the MMS services are designed within the scope of implementation MAP 3.0 All the softwares are implemented under the real time executive for real time application of the Mini-MAP and they are loaded into PROMs at the network board. We tested the LLC functions to make use of a protocol analyzer for the token bus protocol. Also the MMS conformance test was carried out by exchanging primitives between a model system(including NIU) and a MMS product that had already passed the conformance the conformance test based on measurement method of network analysis.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.153-159
• /
• 2014

In this paper, we propose the Distributed Power Saving Control System that enables the active and intelligent control(on/off and/or dimming control) of the lightning device using sensors and mobile agents. The proposed system is effective for energy saving and induces cost reductions in design and development of power saving control system as adding remote-monitoring or controlling functions is easier with the application of a variety of active rules. Moreover, the system improves the effectiveness of the acquired sensing data by real-time event handling and device controlling using a mobile agent based sensor network middleware that regularize the contextual information or a user's emotion. The results of this paper present the potential applicability of the proposed distributed control system using mobile agent in various active sensor network applications.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.49-54
• /
• 2006

The X-ray unit developed by this study is to diagnose emergency cases which is too far from a hospital and to classify the patients. We have to use the X-ray in a ambulance or the scene of an accident where we cannot use the AC220 outlet because of the distance from a hospital as well. The X-ray unit developed has a characteristics as follows. First of all, as the unit has a condenser in itself where there is no electric supply, we can use the X-ray inspector in a mountain area or a island. Second, we can detect by digital detector the information taken by X-ray from DC 12[V] electricity and store as a form of file. A control circuit can secure the reliability of the X-ray unit by using the Pic16F84A X-ray and provide various functions. The X-ray unit which suits remote emergency system can be efficiently used for the emergent cases who is too far from a doctor and a hospital or in the situation where it is difficult to diagnose, transcribe and treat simultaneously.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1208-1213
• /
• 2006

A micro embedded did the task to be simply the sequent at the past. The necessity of an embedded operating system did not exist in the reason. We satisfy the complication of the system and operating system have been desired for the officer of the process. The necessity of the process of real-time processing increased also with fast response time to users, The porting follows and have been composed of an real-time embedded operating system. We can control the control unit with the sensor to be established in the building, An embedded web sever to use the resource of the at least is appering a networking facility of interaction. In this paper, The web sever to be implemented in a purity software. We draw data for the thing to implement overall demo to the remote through Internet and We put the point even though we organized the frame to control this. we have successfully ported linux on an embedded system, which is based on intel StrongARM SA-1110 processor, then written several network modules of ethernet-based network device.