• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.6
• /
• pp.521-528
• /
• 1988

Into the telecommunications industry, which had been monopolistic, a few advanced countries introduced competition through 70's and 80's. And this trend is going on worldwide. The introduction of competition into the industry is made mainly in the long distance, international and enhanced market. This liberalisation results from the fundamental change of the cost function. Suggesting that the cost comprises of that of the facility sector and that of the operation sector there exists the economies of scale in the facility sector in general. The major ground for the monopolistic industrial structure in the past was the natural monopoly depending on the economies of scale. But the rapid advance of the technology by a large margin. This decrease has resulted in the change of the cost function. That is while there exists the economies of scale in the smaller production scale, the average cost increases beyond a certain scale. This means that the natural monopoly collapsed, and that the competitive structure is more efficient than the monopolistic structure. But, because there exists economies of scale in the smaller scale, the desirable number of players, which could result in efficient industry structure depends on the market size. Such correlation between technological level market size and the degree of regulation is found in the case of U.S.A., Japan and U.K., where deregulation policy of the telecommunications market has already been carried out. In U.S.A., which has the largest market and the highest technological level the degree of regulation is lowest. Also in the order of Japan and U.K. the regulation is severer. Japan and U.K. are likely to liberalize still more, as the technology advances and the market grows. This article is just the beginning of the research, and this hypothesis requires more detailed research.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.34-46
• /
• 2020

In order to supply stable natural gas in the future, it is necessary to forecast the demand in advance and secure the quantity of supply. In this paper, we propose a method of estimating the demand function of industrial natural gas, which is the core of the increase of domestic natural gas demand in the future. The cross-sectional data of 304 domestic industries were used to estimate the demand function of the industrial natural gas, and the effect of industry specific characteristics such as capital investment, manufacturing cost. Finally, the least absolute deviation estimation method which is robust to outliers and does not assume the homogeneity of the error term and the normality, And the results were derived. In addition, the economic value of industrial city gas was estimated using the price elasticity of industrial city gas. Therefore, it can be seen that the continuous expansion and supply of city gas to the industrial sector is beneficial at the national level, and the government needs to promote expansion through the industrial city gas support policy.

• Journal of Korea Port Economic Association
• /
• v.27 no.3
• /
• pp.65-90
• /
• 2011

Private stevedoring companies are leasing and operating the container terminals of the Busan Port. The total amount of lease fees private stevedoring companies paid in 2010 reached 161 billion wons, an approximately 66 percent of the total revenue of the Busan Port Authority(BPA). In other words, lease fees are the most important revenue source for BPA. However, the lease fee assessment system of Busan container terminals goes against the principle of equity due to different assessment methods and criteria adopted by each container terminal. Therefore, the purpose of the study is to analyze the systematic problems of the lease fee assessment system that is used at Busan container terminals, and propose a new standardized scheme with a case study on the new system. In order to standardize the assessment system, the assessment methods need to be simplified by using the Discounted Cash Flow(DCF) method. In addition, the assessment criteria such as assessment duration, discount rates, price indexes, estimated container throughputs, sales unit price per TEU, operation costs, including labor costs, need to be standardized as well. The new standardized assessment system can be applied to estimate lease fees for new terminals. However, for existing terminals to run the new system, factors such as assessment duration, discount rates, price indexes, estimated container throughputs, investment and re-investment costs, and maintenance & repair costs of the new system should be changed slightly.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.287-294
• /
• 2013

The roll-to-roll (R2R) printed electronics system is one of the most promising technologies for the printed electronics industry because of several advantages in terms of productivity and cost. In the R2R printed electronics system, the characteristics of the printed patterns are an important issue that determines the functional quality of the printed matter. This study analyzed how several main factors may affect the characteristics of printed patterns, especially the thickness and surface roughness. The statistical model for estimation of the printed pattern was developed as a function of the main factors using the design of experiment (DOE) methodology. Based on the statistical analysis results, the R2R printed electronics system can be designed to control the characteristics of printed patterns.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.175-175
• /
• 2012

플라즈마를 이용하는 공정은 평판 디스플레이와 박막 트렌지스터, LCD 같은 반도체 산업에 널리 사용되고 있다. 최근 이와 같은 산업을 위한 공정은 마이크로 단위 이하에서 진행되고 있으며, 그 크기가 작아질수록 공정을 위한 비용은 증가하게 되었다. 따라서 제품의 대량생산 및 원가절감을 위해 웨이퍼의 대구경화가 진행되었고, 그런 대구경의 웨이퍼을 생산하기 위한 대면적 플라즈마 소스 개발 역시도 필요하게 되었다. 그리고 2014년에는 450 mm 크기의 웨이퍼가 사용될 것으로 예상되고 있다. 450 mm 대구경 웨이퍼용 유도결합플라자마 장치를 이용하여 플라즈마의 특성을 Langmuir probe를 사용하여 측정하였다. 플라즈마를 방전시키는 안테나의 형태는 spiral 형태의 안테나를 사용하였고, 이중주파수를 사용하기 위해 spiral 형태의 안테나를 두개로 나누어 안쪽의 안테나에는 2 Mhz를 바깥쪽의 안테나에는 13.56 Mhz를 인가하였다. 공정 압력은 10 mTorr로 유지하고 안쪽의 2 Mhz 안테나에는 100~800 W까지 변화시키고 바깥쪽의 13.56 Mhz 안테나에는 100~1,000 W까지 변화시켜 그 때의 플라즈마의 특성을 분석해 보았다. Langmuir probe를 이용하여 방전된 플라즈마를 관찰한 결과, 기판 위에서의 플라즈마 균일도가 4~23%가 되는 것을 확인 할 수 있었다. 13.56 Mhz의 인가되는 파워를 고정 시키고 2 Mhz만을 변화시켰을 경우 2 Mhz의 파워를 400 W까지 증가시켰을 때는 플라즈마의 밀도가 서서히 증가하였으나 400 W 이상에서는 밀도가 크게 증가하는 것을 볼 수 있었다. 하지만 플라즈마의 온도와 potential의 경우 밀도와는 반대로 2 Mhz에 인가되는 파워가 증가 될수록 감소하는 경향을 보였다. 위의 실험을 통해 우리는 전자에너지분포함수(EEDFs)를 얻을 수 있었고, 그 안에서 낮은 주파수(2 Mhz)를 이용하여 낮은 에너지를 가진 전자의 밀도를 조절할 수 있다는 것과 높은 주파수(13.56 Mhz)에 인가된 파워가 증가함에 따라 높은 에너지를 얻을 수 있다는 결과를 확인 할 수 있었다.

• Journal of Digital Convergence
• /
• v.17 no.5
• /
• pp.217-223
• /
• 2019

A study in predicting defects of spot welding in real time in automotive field is essential for cost reduction and high quality production. Welding quality is determined by shear strength and the size of the nugget, and results depend on different independent variables. In order to develop the real-time prediction system, multiple regression analyses were conducted and the two dependent variables were obtained with sufficient statistical results with three independent variables, however, the quality prediction by the regression formula could not ensure accuracy. In this study, a multi-layer neural network circuit was constructed. The neural network by 10 dynamic resistance variables was constructed with three hidden layers to obtain execution functions and weighting matrix. In this case, the neural network was established with three independent variables based on regression analysis, as there could be difficulties in real-time control due to too many input variables. As a result, all test data were divided into poor, partial, and modalities. Therefore, a real-time welding quality determination system by three independent variables obtained by multiple regression analysis was completed.

• Environmental and Resource Economics Review
• /
• v.21 no.1
• /
• pp.93-127
• /
• 2012

We estimate how much KEPCO can save their loss and how much social welfare can be increased by applying the real-time pricing instead of current regulated retail price in the electricity market in order to analyze the problem of the regulated retail price which is fixed below the marginal cost. We estimate the demand functions of peak time and off-peak time in summer (June to August) and winter (December to February). We construct the supply function based on hourly step-wise linear marginal cost functions, too. We find that the increase of social welfare will be 67 billion won in summer if the fixed retail price is changed into the real-time pricing scheme. The total 705 billion won will be transferred from consumer surplus to producer surplus and the rest (67 billion won) will be saved from the reduction of deadweight loss among KEPCO's loss. In winter, the increase of social surplus will be 225 billion won and 1,174 billion won of KEPCO's loss will be transferred from consumer surplus. As a result, we conclude that the regulation of the retail price in the electricity market induces the social welfare loss and KEPCO suffers a huge loss.

• Journal of the KSME
• /
• v.29 no.6
• /
• pp.573-580
• /
• 1989

현재 한국의 자동차 공업은 80년대 초반부터 급격한 발전으로 세계의 다른 자동차 생산국으로부 터 경계의 대상이 되고 있다. 그러나 그 내면을 살펴보면 아직도 중요한 기술은 거의 대부분 일 본이나 독일, 미국 등 자동차 선진국의 기술에 의존하고 있으며 특히 엔진 분야는 대부분 외국 기술에 의존하고 있다고 해도 과언이 아니다. 엔진은 자동차 생산원가의 약 30%를 차지하며 자동차의 성능을 좌우하는 경우 기술료 지급은 물론이며 부품구매 선택의 여지가 없어진다. 또한 요즈음과 같이 상품의 수명주기가 짧게 되어 가는 추세 하에서는 시장의 요구에 대처해나가는 엔지니어링 적응력이 부족하게 되면 결국 경쟁성을 상실하게 된다. 그러나 이러한 문제점을 인 식하면서도 80년대 초까지 독자적인 엔진개발을 하지 못했던 원인은 크게 2가지로 분석할 수 있다. 첫째는 한국의 자동차 회사들의 기술 축적의 미약과 둘째는 독자개발의 낮은 투자효율성 이다. 즉 엔진과 변속기를 기술 도입할 때 기술료 지급은 자동차 생산댓수당 5-6만원에 달하지만 엔진과 변속기를 독자개발시의 투자비는 약 300-500억원에 달하므로 간단한 산술적 계산으로는 모델당 100만대를 생산하여야만 투자의 가치가 있는 것으로 보여진다. 물론 위에서 언급한 바와 같은 여러 가지 요인에 의하면 이 숫자보다 훨씬 적은 생산량으로도 경쟁성이 확보될 것으로 예상된다. 이제 한국의 자동차 생산량도 연간 백만 대를 상회하는 수준이며 앞으로도 급격한 양과 질적인 팽창이 기대되고 있는 시점에 자동차 메이커들은 각사 모두 독자적인 고유 엔진 개발을 착수하였으며 일부 회사는 이미 성공을 거두어 양산 준비를 하고 있는 것으로 알고 있다. 그러나 아직도 엔진의 설계부터 양산까지 걸리는 기간이 타 선진 메이커에 비하면 상당히 길며 이로 인해 신제품의 경쟁력 저하가 우려되고 있는 상태이다. 이러한 문제점 해결에 도움을 주기 위해서 학계는 기업체의 기술 개발방향과 전략을 이해하는 것이 필요하다.grightarrow$cn-semistratifiable over$\longrightarrow$semistratifiable over $\alpha$ 2, 어떤 공간이 cn-Semistratifiable over $\alpha$이기 위한 필요충분 조건은 그것이 linearly cushioned cn-pairnet를 갖는 것이다. 3. cn-semistratifiable over $\alpha$의 부분공간 역시 cn-semistratifiabie over $\alpha$ 하다. 4. on-semistratifiable over $\alpha$의 유한개의 적공간 역시 cn-semistratifiabie over $\alpha$한다. 5. 폐 cn-semistratifiable over $\alpha$ 부분공간들의 합공간 역시 on-semistrbtifiable over $\alpha$ 하다. 6. 폐연속 net-cevering 함수에 의하여 cn-semistratifiable over $\alpha$ 성질이 보존된다. 보잘것이 없었고, 현재에도 각 시도별 또는 대학주관의 경시대회가 있으나 거국적인 호응을 받지 못했다. 물론 국제 대회에 참석시키는 것은 엄두도 내지 않았다.로 나타났다. 4. 코코넛과 소나무수피의 경우 암모니아 가스에 대한 흡착 능력은 거의 비슷한 것으로 사료되며, 코코넛의 경우 전량을 수입에 의존하고 있다는 점에서 국내 조달이 용이하며, 구입 비용도 적게 소요되는 소나무수피를 사용하는 것이 경제적이라고 사료된다. 5. 마지막으로 악취제거 미생물균주를 접종한 소나무수피 50%와 펄라이트 30%의 혼합재료를 24시간 동안 장기간 운전 실험을 수행한 결과 암모니아 99.06%, 황화수소 96.61%의 제거

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.2
• /
• pp.97-104
• /
• 2022

This study investigated the characteristics for the optimal concentration of addition of the mixing solution through the corn husk pulverization and surface modification of biomass byproducts adding mixed solution between ESO and silane. And surveyed the specific surface area, water absorption, particle size and physical properties of bio- degradable plastic sheet. The specific surface area was 1.105 m²/g, particle size was the highest at 19 ㎛. The impact strength, tensile strength, elongation and hardness of plastic sheet showed the highest at the 1% concentration among the mixing solutions. The flexural strength and modulus was high according to the increasing the mixing solution. The results above showed that it was the best the adding 1% of mixed solution after silane treatment of corn husks for its manufacture as a bio-based plastic sheet.

• Journal of Korean Society of Forest Science
• /
• v.30 no.1
• /
• pp.8-18
• /
• 1976

This study was carried out to exploit and utilize the exotic American Sycamore(Platanus occidentalis) grown in Korea as a veneer species for plywood manufacture. At present most parts of veneer Legs used in Korea were depended entirely upon the gonus Shorea woods(lauan logs) imported from Southeast Asia region. To decrease manufacturing cost and save imported lauan veneer logs, the effects on properties affecting to the six types of plywood made from proper veneer constructions composed by domestic American Sycamore and imported lauan veneers were compared and discussed. The study has important meanings for the promotion of plywood manufacture by domestic materials. Important items dealt with this study were dry and wet shear strength, moisture contents, specific gravties, and bending strength. By the results and discussions it may be summarized as follows: 1) In dry shear strength platanus(sycamore) core lauan plywood was shown most excellent strong results, and next orders were all lauan plywood, platanus faced lauan plywood, lauan core platanus plywood, lauan faced platanus plywood, and all platanus plywood. There was no difference between platanus core lauan plywood and all lauan plywood, but the differences between those plywoods and the other types of plywood were recognized. 2) In wet shear strength platanus core lauan plywood was shown excellent result the same as dry strength. The difference between platanus core lauan plywood and the other types of plywood was shown, but among the other types of plywood except platanus core lauan plywood were not recognized. 3) The differences among moisture contents according to the veneer construction were not recognized. 4) The plywood constructed by two or more sheets of lauan veneer was shown lower specific gravities than the plywood constructed by two or more sheets of platanus veneer. It is believed that this tendency due to the original specific gravities of veneer before construction. 5) The differences among specific gravities of lauan core platanus plywood, all platanus plywood and lauan faced platanus plywood were not recognized, and like this analyzed result among platanus core lauan plywood, all lauan plywood and platanus faced lauan plywood were not recognized. Accordingly it is believed that the differences are not shown among the plywood constructed by two or more veneers of same species. 6) In bending strength platanus core lauan plywood was shown most excellent values. Next orders were all lauan plywood, platanus faced lauan plywood and the other types of plywood. The differences among the plywood constructed by two or veneers of lauan were shown, but not shown among the plywood constructed by tow or more veneers of platanus.