• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.2
• /
• pp.163-174
• /
• 2020

Particulate matter levels are rapidly increasing daily, and this can affect human health. Therefore, air pollutant emissions from sea vessels require management. This study evaluates the status of air pollutants, focusing on air pollutant emissions from the vessels of the Korea Coast Guard (KCG), and proposes national management measures to reduce emissions. According to a report recently released (2018) by the National Institute of Environmental Research (NIER), emissions from vessels constituted 6.4 % of the total domestic emissions, including 13.1 % NO_x, 10.9 % SO_x, and 9.6 % particulate matter (PM10/PM2.5). Among the rates of pollutant emission from vessels, the emission rates of domestic and overseas cargo vessels were the highest (50.6 %); the ratio of fishing boats was 42.6 %. With respect to jurisdictional sea area, 44.1 % of the emissions are from the south sea, including the Busan and Ulsan ports, and 24.8 % of the emissions are from the west sea, including the Gwangyang and Yeosu ports. The KCG inspects boarding lines to manage emission conditions and regulate air pollutant emissions, but it takes time and effort to operate various discharge devices and measure fuel oil standards. In addition, owing to busy ship schedules, inspection documents are limited in terms of management. Therefore, to reduce the air pollutant emissions of such vessels, regulations will be strengthened to check for air pollutants, and a monitoring system based on actual field data using KCG patrol ships will be established, for each sea area, to manage the emissions of such vessels. Furthermore, there is a need for technological development and institutional support for the introduction of environmentally friendly vessels.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.781-786
• /
• 2010

In this study, a new concept of ocean transport system, called the mobile harbor serving for a short distance transport of containers with cargo handling cranes between mother containerships and coastal ports, is introduced. Instead of direct berthing a very large containership at the coastal port, Mobile Harbor is moving to the offshore mooring basin with enough water depth condition. Therefore, investigation of the coastal environment, technical condition and limitation of the domestic trade ports for the application of Mobile Harbor, is essential process. To figure out the accessibility of mobile harbor, the environmental conditions, the cargo handling capacity and marine traffic volume and flow pattern has been analyzed with the tools for marine traffic simulation and virtual navigation aids system. The most proper Mobile Harbor mooring areas among trade ports of the south and east coast are selected by analyzing the obtained information and evaluating its application: (1) Under natural environmental conditions such as air and sea weather, three candidate areas are selected such as Masan port, Ulsan port, and Busan(New port) port. (2) Under marine traffic and appropriateness of water facilities, three candidate areas are selected as Mokpo port, Busan(New port) port, and Donghae & Mookho port (3) For a region-based analysis considering handling capacity and the local managed trade ports in vicinity, three candidate areas are selected as Busan region, Yosu & KwangYang region, and Mokpo region. Through this study, the basic guideline for selection of optimum trade port and offshore mooring basin for mothership and Mobile Harbor is recommended. In order to apply the Mobile Harbor to the real water, navigaton aids as the virtual route identification with AIS must be introduced for maritime safety in the vicinity of Mobile Harbor area which berthing and cargo handling is being conducted.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2002.05a
• /
• pp.21-32
• /
• 2002

In accordance with the development plans of Ulsan harbor, Ulsan new harbor will be contructed considering supporting Ulsan harbor as a safe berthing and departure at single buoy mooring(SBM). In this study, we used a full-mission ship handling simulator adopting 300,000 DWT VLCC manoeuvered at the planned Ulsan SBM. Five masters who have had a long experience of ship maneuvering were called to carry out the simulations, of which each scenario were tried one, completed total of 68 times. The marine traffic safety was assessed in terms of 1) the closest point of approach(CPA) to other SBM and breakwater in the vicinity and the probability of crossing the restricted area of the closest SBM and fairway limit, 2) subjective evaluation such as the mental burden and the maneuvering difficulty of shiphanders, and 3) the opinions of shiphandlers. From the result of this simulation, we have a conclusion as follows; First, because crude oil berthing angle is so small by current S-OiL Co. crude oil buoy by SK Co. No 3 crude oil buoy different view SK Co. No 3 crude oil buoy and interference of current KNOC crude oil buoy, Berthing is impossible, and Emergency departing is very dangerous too operation impossible. Second it is desirable that SK Co. No 2 and No 3 Single buoy Mooring that do different view controls position so that to be not put in straight line each other. Third, SK Co. No 1 and 2 single buoy mooring that do different view to Onsanhang berthing and departing is seized by single buoy mooring by external force ship that set sail does faith control need.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.2
• /
• pp.116-127
• /
• 2002

Most of finite difference numerical models for the simulation of tsunami propagation developed so for are based on the shallow-water equations which are frequently solved by the leap-frog scheme. If the grid size is properly selected, this numerical scheme gives a correct dispersion effect fur constant water depth. However, if the water depth changes, the dispersion effect of tsunamis can not be accurately considered at every grid point in the whole computational domain. In this study we improved the existing two-dimensional dispersion-correction finite difference numerical scheme. The present scheme satisfies the local dispersion relationships of tsunamis propagating over a slowly varying topography while using uniform grid size and time step. To verify the applicability of the improved numerical model, a tsunami due to 1983 East Sea central earthquake is simulated for Korean harbors with the tide gage records such as Sokcho, Mukho, Pohang and Ulsan in the East Sea. Numerical results of the 1983 tsunami are compared with the measured data and the accuracy of the present numerical model is evaluated.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.268-268
• /
• 2019

The purpose of this study is to understand the risk of chemical product, Styrene Monomer(SM), shipped in a vessel. SM is harmful chemical product which can make injury, explosion and/or fire in a vessel. The understand of SM risk is very important to protect seafarer's body and vessel safety. This research can be expected that the understanding of SM risk by a seafarer's to prevent accidents by SM explosion and/or fire.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.4
• /
• pp.316-322
• /
• 2012

In the port of Ulsan with the area of harbor limit of $83km^2$, 25,432 vessels have been entering annually and only 35 vessels can anchor simultaneously at the anchorage. The area of harbor limit of Ulsan constitutes just 65 percent compared to $127.5km^2$ which is an average of main ports in Korea. In this regard, the port of Ulsan needs to expand the area of anchorages inevitably for enhancing the efficiency of port operation. To select the best anchorage area in Mipo harbor with the introduction of a concept of emergency anchorage, this study analyzed the safety of navigation and anchorage, and safety management, etc. in the prospected anchorage on the basis of the marine traffic survey observing traffic density. Furthermore, after drawing preliminary and final schemes through gathering the opinions from maritime users, safety management organizations and academic experts group, the best arrangement of emergency anchorage has been selected through the conference of interested parties. Then, the final scheme was also verified through figuring out the marine traffic system and carrying out the ship handling simulation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.3
• /
• pp.149-157
• /
• 2005

Typical water quality (WQ) parameters defined in the governing equation of the WQ model are the pollutant loads from atmosphere and watersheds, pollutant release rates from sediment, diffusion coefficient and reaction coefficient etc. The direct measurement of these parameters is very difficult as well as requires high cost. In this study, the pollutant budget equation including these parameters was used to construct the linear simultaneous equations. Based on these equations, the inverse problems were constructed and WQ parameter estimation method minimizing the sum of squared errors between the computed and observed amounts of the mass changes was suggested. WQ parameters, i.e., the atmospheric pollutant loads, sediment release rates, diffusion coefficients and reaction coefficient, were estimated using .this method by utilizing the vertical concentration profile data which has been observed in Cheonsu Bay and Ulsan Port. Values of the estimated parameters show a large temporal variation. However, this technique is persuasive in that the RHS (root mean square) error was less than $5.0\%$ of the observed value ranges and the agreement index was greater than 0.95.

• Journal of Navigation and Port Research
• /
• v.31 no.6
• /
• pp.479-484
• /
• 2007

For calculation of wave field for design of coastal and port structures, generally the wind fields from inland observation record or the predicted waves from deep water wave transformation model are being used. However, for the first case, as we should revise the wave data adopting correcting parameters depending on the distance from the coast and location, it is difficult to extract water waves from wind field. Furthermore, for the second case, because of the calculation which executed under very large grid sizes in the wide domain, the simulation(wave transformation) implied uncertainty in the near shore area and shallow region. So it's difficult to obtain exact data from the simulation. Thus, in this study the calculation of wave field on shallow water is accomplished using the observed data of typhoon 'Maemi' in the Korea Eastern South sea. Moreover, for the accuracy of the calculated wave field, we compared and studied the observed data of wave height and direction on the vicinity of the Ulsan waters. It is proved that the results of this study is more accurate than the existing method with showing ${\pm}1.3%$ difference between observed and calculated wave height distribution in Ulsan waters

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.163-168
• /
• 2008

Ship detection from satellite remote sensing is a crucial application for global monitoring for the purpose of protecting the marine environment and ensuring marine security. It permits to monitor sea traffic including fisheries, and to associate ships with oil discharge. An automatic ship detection approach for RADARSAT Fine Synthetic Aperture Radar (SAR) image is described and assessed using in situ ship validation information collected during field experiments conducted on August 6, 2004. Ship detection algorithms developed here consist of five stages: calibration, land masking, prescreening, point positioning, and discrimination. The fine image was acquired of Ulsan Port, located in southeast Korea, and during the acquisition, wind speeds between 0 m/s and 0.4 m/s were reported. The detection approach is applied to anchoring ships in the anchorage area of the port and its results are compared with validation data based on Vessel Traffic Service (VTS) radar. Our analysis for anchoring ships, above 68 m in length (LOA), indicates a 100% ship detection rate for the RADARSAT single beam mode. It is shown that the ship detection performance of SAR for smaller ships like barge could be higher than the land-based radar. The proposed method is also applied to estimate the ship's dimensions of length and breadth from SAR radar cross section(RCS), but those values were comparatively higher than the actual sizes because of layover and shadow effects of SAR.

• Journal of Korea Port Economic Association
• /
• v.37 no.1
• /
• pp.159-178
• /
• 2021

This study analyzed issues and trends related to ports with 86,611 news articles for the 30 years from 1991 to 2020, using BIGKinds, a big data news analysis service. The analysis was based on keyword analysis, word cloud, relationship diagram analysis offered by BIG Kinds. Analysis results of issues and trends on ports for the last 30 years are summarized as follows. First, during Phase 1 (1991-2000), individual ports such as Busan, Incheon, and Gwangyang ports tried to strengthen their own competitiveness. During Phase 2 (2001-2010), efforts were made on gaining more professional and specialized port management abilities by establishing the Busan Port Authority in 2004, the Incheon Port Authority in 2005, and the Ulsan Port Authority in 2007. During Phase 3 (2011-2020), the promotion of future-oriented, eco-friendly, and smart ports was major issues. Efforts to reduce particulate matters and pollutants produced from ports were accelerated, and an attempt to build a smart port driven by port automation and digitalization was also intensified. Lastly, in 2020, when the maritime sector was severely hit by the unexpected shock of the COVID-19 pandemic, a microscopic analysis of trends and issues in 2019 and 2020 was made to look into the impact the pandemic on the maritime industry. It was found that shipping and port industries experienced more drastic changes than ever while trying to prepare for a post-pandemic era as well as promoting future-oriented ports. This study made policy suggestions by analyzing port-related news articles and trends, and it is expected that based on the findings of this research, further studies on enhancing the competitiveness of ports and devising a sustainable development strategy will follow through a comparative analysis of port issues of different countries, thereby making further progress toward academic research on ports.