• Journal of Korean Society of Transportation
• /
• v.35 no.2
• /
• pp.105-115
• /
• 2017

Each year, a number of tourists visit Jeju Island, a popular tourist destination in the Republic of Korea. A large portion of the tourists (about 61%) use a rental car as a means of transportation. With this reason, the number of rental cars registered in Jeju was 15,517 in 2011, while the total number of the rental car has rapidly increased to 26,338 in 2015. For the same period, the number of rental car involved traffic accidents has been doubled. Thus, this study aims to analyze the rental car accidents' characteristics, clarifying primary factors related to rental car accidents in Jeju Island. To do this, 918 rental car accidents and 4,201 non-commercial passenger car accidents that occurred in Jeju island over the two years (2014-2015) were compared, using statistical methods such as chi-square test and z-test. The results show that the characteristics of rental car involved accidents are different from those caused by the passenger cars. Most of the rental car accidents in Jeju were caused by young drivers and drivers who had just obtained their driver's licenses. This study finds that driver immaturity, unfamiliar geography, and driving an unfamiliar vehicle are the main causes of the rental car accidents. Statistical analysis confirms that the characteristics of these accidents appeared significantly different from the passenger cars in terms of human and environmental factors. On the other hand, there is no clear evidence that vehicle-related characteristics are different between rental car and non-commercial passenger car accidents. The implications on transportation safety analysis and effective solutions to prevent rental car traffic accidents are discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.622-628
• /
• 2016

As the suction pad-supporting bike carrier attached to a car may be subject to an excessive dynamic load due to random vibrations and centrifugal forces during driving, its structural safety is of great concern. To examine this, the finite-element method with a fluid-structure interaction should be used because the pressure on the pad bottom is changed in real time according to the fluctuations of the force or the moment applied on the pad. This method, however, has high computing costs in terms of modeling efforts and software expense. Moreover, the accuracy of computation is not easily guaranteed. Therefore, a new method combining the experiment and computation is proposed in this paper: the bottom pressure and contact area of the pad under varying loads was measured in real time and the acquired data are then used in the nonlinear elastic finite-element calculations. The computational and experimental results obtained with the product under development showed that the safety margin of the pad under the axial loading is relatively sufficient, whereas with an excessive rotational loading, the pad is vulnerable to separation or a local surface damage; hence, the safety margin may not be secured. The predicted contact behavior under the variation of the magnitude and type of the loading were in good agreement with the one from the experiment. The proposed analysis method in this study could be used in the design of similar vacuum pad systems.

• Journal of Korean Society of Transportation
• /
• v.32 no.3
• /
• pp.227-238
• /
• 2014

There is no question that railroad investment is crucial for better transport systems and the Korean government has continued to invest in railroad facilities. Nevertheless, the modal share of railroad, in particular, for freight has decreased. This is because rail freight transport can hardly meet customer needs such as just-in-time(JIT), a door-to-door service, compared to road transport, to be specific, trucking which can directly carry the freights to the final destinations. This has made the value of the railroad infrastructure less, which has been operated for the past 114 years. This study proposes a new freight movement concept called Piggy Back System. This system can carry freight trucks on the trains and deliver the freights to the final destinations. It can make a door-to-door deliver system possible for railroad transportation, which is the key factor for modal shift from road to railroad. For implementing this, this study proposes three important things: the cost-efficient reforming way of railroad yard that has been used for the past 114 years, the diagram plan of train services, and some technical reviews like clearance limits. This is the first study with practical proposals and solutions on this topic in Korea. The suggestions of this study cut down distribution costs by more than seven trillion won.

• Ecology and Resilient Infrastructure
• /
• v.2 no.4
• /
• pp.305-310
• /
• 2015

In 2014, the city of Seoul revised the ordinance regarding water-cycle restoration in the Seoul Metropolitan areas by incorporating the 'Low Impact Development (LID)' policy. The new ordinance plan will utilize 630 mm or almost 45 to 50% of annual rainfall until 2050 by means of providing a rainwater management system consisting of infiltration, retention and vegetation. The LID is believed to be the key to achieving the target requirements, specifically in development projects. This research was performed to evaluate the stormwater runoff and pollutant reduction performance of three different LID facilities (water circulation facilities) including an infiltration inlet, bioretention swale, and permeable pavement constructed in Seoul City. Results show that among the water circulation facilities, the permeable pavement achieved the highest runoff reduction as it was able to entirely capture and infiltrate the runoff to the ground. However, in order to attain a long-term performance it is necessary to manage the accumulated sediment and trapped pollutants in the landscape areas through other water circulation techniques such as through soil erosion control. In terms of pollutant reduction capability, the infiltration inlet performed well since it was applied in highly polluted areas. The bioretention facility integrating the physico-chemical and biological mechanisms of soil, microorganisms and plants were able to also achieve a high runoff and pollutant reduction. The water circulation facilities provided not only benefits for water circulation but also various other benefits such as pollutant reduction, ecological restoration, and aesthetic functions.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.285-290
• /
• 2013

As well as the advanced development of modern society, and the environmental problems caused by the use of fossil fuels is emerging. So do not reap the performance level of the car to be able to replace existing fossil fuel and low-emission energy and technology development are continually strives. Therefore, this study aims to present the direction of the new interface 21st century Mobile Auto Electric Segway technology in the field of security and disadvantages based. The Segway is a problem because the control itself skewed by certain slope where the slope in the wrong adjustment tipping. In this study, the year saw the introduction of two pressure sensors(Load cell) used to solve these drawbacks, according to the ratio of the weight control methods. In addition, the ramps operate in a straightforward, using an acceleration sensor and a gyro sensor in order to compensate for the slope value in free control method to study looked. Measured by calculating the value of the occupant's weight and according to the inclination of the pressure sensor pressure sensing experiment results this year, we can see that the control variable for the change in body weight is greater than the inclination. Segway is also easy to control, and the stability of the ramps, etc. As a result, created using a pressure sensor.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.31-42
• /
• 2019

Among the driving information recorded in the event data recorder (EDR), the speed information of the vehicle before the traffic accident is a very important factor that determines the punishment of the driver of the accident vehicle, the identification of the offender and the victim, and the possibility of avoiding the accident. Also, by analyzing the EDR data, the deceleration of the accident vehicle can be analyzed. In this study, the results of the braking test of the previous study and the analysis of the EDR data of the traffic accident vehicle were compared to suggest an appropriate deceleration value applicable to the calculation of the stopping distance. As a result of the braking test of the vehicle equipped with ABS of the previous study, the average deceleration of the vehicle was 0.79g ~ 0.94g. In addition, the deceleration value was calculated from 0.92g to 0.94g in the recent automobile safety evaluation braking test conducted by the Korea Automobile Testing & Research Institute. In addition, the deceleration value of 0.55g ~ 0.71g was calculated through the analysis of EDR data performed in this study, and the value was smaller than the deceleration value measured in the braking experiment of the previous study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.639-645
• /
• 2018

This paper is intended to develop a decision model that can be applied to autonomous vehicles and autonomous mobile vehicles. The developed module has an independent configuration for application in various driving environments and is based on a platform for organically operating them. Each module is studied for decision making on lane changes and for securing safety through reinforcement learning using a deep learning technique. The autonomous mobile moving body operating to change the driving state has a characteristic where the next operation of the mobile body can be determined only if the definition of the speed determination model (according to its functions) and the lane change decision are correctly preceded. Also, if all the moving bodies traveling on a general road are equipped with an autonomous driving function, it is difficult to consider the factors that may occur between each mobile unit from unexpected environmental changes. Considering these factors, we applied the decision model to the platform and studied the lane change decision system for implementation of the platform. We studied the decision model using a modular learning method to reduce system complexity, to reduce the learning time, and to consider model replacement.

• Journal of Wetlands Research
• /
• v.22 no.2
• /
• pp.145-152
• /
• 2020

Highways are characterized by high non-point pollutant emissions due to high traffic volumes and sections that cause abrupt change in driving speed (i.e. rest stations, ticketing office, etc.). Most highways in Korea were constructed with layers that do not allow adequate infiltration. Moreover, non-point pollution reduction facilities were not commonly installed on domestic highways. This study was conducted to evaluate a facility treating highway runoff and develop a cost-effective design for infiltration facilities by using soil amendment techniques. Performing soil amendment increased the hydraulic retention time (HRT) and infiltration rate in the facility by approximately 30% and 20%, respectively. The facility's efficiency of removing non-point pollutants (Total Suspend Soiled (TSS), Chemical Oxygen Demand(COD), Biological Oxygen Demand(BOD), Total Nitrogen (TN) and Total Phosphorus, (TP) were also increased by 20%. Performing soil amendment on areas with low permeability can increase the infiltration rates by improving the storage volume capacity, HRT, and infiltration area. The application of infiltration facilities on areas with low permeability should comply with the guidelines presented in the Ministry of Environment's Standards for installation of non-point pollution reduction facilities. However, soil amendment may be necessary if the soil infiltration rate is less than 13 mm/hr.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.200-207
• /
• 2016

The automotive seat is an important component that moves in sync with the driver and is actively being developed with various new functions. The aim of this work is to develop a lightweight seat cushion extension module using a lightweight material. To this end, a structural strength analysis, vertical strength test, and durability test were conducted. In the structural analysis, the maximum value of deformation under vertical load was 4.98 mm at the front of the upper panel. The maximum stress was approximately 105 MPa, which occurred at the point of contact between the upper and lower panels of the module. The vertical strength test showed a maximum vertical deformation of 5.31 mm under a vertical load, which differed from the analysis results by approximately 6.45%. The structural safety of the product was verified by the fact that it showed no harmful deformation or damage during operation after the vertical strength test and a durability test for 20,000 cycles. Furthermore, the use of engineering plastics made it possible to reduce the weight by approximately 30% compared to existing products. The lack of damage after tests verified the passenger safety, strength, and rigidity of the product. The results are expected to be applied for improving environmental and fuel efficiency regulations and preventing accidents due to driver fatigue. The applications of this module could be expanded various types of vehicles, as well as other industries in which eco-friendly and lightweight materials are used.

• Environmental and Resource Economics Review
• /
• v.21 no.2
• /
• pp.321-340
• /
• 2012

Korean government recently announced that new passenger cars sold within South Korea in 2009 ran an average of 12.27 kilometers per liter of fuel, which is an 7% point increase of the fuel efficiency. The government interpreted these improvements in the fuel economy as energy savings of 60,000 toe and as a reduction of 160,000 ton $CO_2$ emissions. However, improvements in energy efficiency make energy services cheaper, which is known as rebound effect. If this rebound effect exists, and the size of the effect is not negligible, ignoring this could result in overestimating the energy savings achieved by the fuel efficiency increase. Using detailed data on household and vehicle characteristics, our results suggest that there exist a short-run rebound effect of 0.299(29.9%) for the Korean automobile industry. This is notably smaller than the estimates of West (2004), which finds an estimate of 87% using cross-section data for the US. Furthermore our results highlight the importance of rebound effect on energy savings and the $CO_2$ emissions reduction. Our estimates suggest that the report from Korean government overestimates the energy savings and related $CO_2$ emissions by 29.9% point.