• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.9
• /
• pp.874-880
• /
• 2007

The final purpose of this study is to develop noise abatement procedures for minimizing the environmental impacts caused by aircraft noise in the vicinity of Gimpo Int'l Airport, and to establish appropriate noise limits and monitoring system. The results of study was suggests for more detail the crucial factors which one is reference noise level, $L_{MAX}=88 dB(A)$ at 6.5 km after take-off, and second one is to installation the additional three(3) noise monitoring system on both side of runway.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.3
• /
• pp.343-353
• /
• 1995

The path navigation of autonomous guided vehicle(AGV) or autonomous mobile robot(AMR) assumed that the environment was completely known and the obstacles were fixed. So that, in an environment only partly known or not known at all, the previous works were not successful since the path exploration techniques involved in the work were neither directly applicable nor extensible. In order to improve such problems, this paper was adopted the quadtree technique and proposed the algorithm for an optimal path planning autonomously in an environment and proved a validity through a simulation.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.245-253
• /
• 2008

Quality for civil aviation is very important to maintain the safety of aircraft and public, and strict quality requirements are prescribed in aviation regulations to ensure that each article produced conforms to the type design and is a condition for safe operation. In this study, the quality system requirements for aircraft and parts will be reviewed a concept of FAA's ACSEP(Aircraft Certification System Evaluation Program) and policy for aviation quality system evaluation in comparison with AS9100 for aviation quality management system.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.3
• /
• pp.43-60
• /
• 2005

In september 2004, a new pilot certificate scheme referred to as Sport Pilot Certificate was declared official and standardized in the US. The designation of Light-sport aircraft and the details of the relevant pilot certificate policy was announced out of the perception that a new regulation is required to be applied whereby the limitations on the manufacturing process enhancements and current aviation rules are considered the triggering factors. US Federal Aviation Regulation retains a comprehensive range of airworthiness certificates and aircrafts are managed systematically in accordance with FAR 21, 103. The airworthiness are further segregated into sub categories, which allows differentiated management. Korean Aviation Law classify aircraft into five different categories and powered air vehicle that weighs more than 150kg(19liters fuel capacity) for one seat, 225kg for two seats(38liters fuel capacity) while the systems that fall under a specific mass threshold level are known as ultralight vehicle. The research discusses the policy of the sport pilot certificate and the light-sport aircraft ratings announced official by the Federal Aviation Administration in an intuitive fashion with the analysis of the operations providing the evidence as to the viability of adopting the policy in local grounds. Based on the findings, the report discusses the case for introducing the light-sport aircraft and make recommendation on a strategy of applying the policy in Korea with respect to the pilot certificates, safety agenda, and the written test for the pilot certificate, and operating efficiency.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.1
• /
• pp.67-95
• /
• 2014

Some Contracting States of the Chicago Convention issue FAOC(Foreign Air Operator Certificate) and conduct various safety assessments for the safety of the foreign operators which operate to their state. These FAOC and safety audits on the foreign operators are being expanded to other parts of the world. While this trend is the strengthening measure of aviation safety resulting in the reduction of aircraft accident. FAOC also burdens the other contracting States to the Chicago Convention due to additional requirements and late permission. EASA(European Aviation Safety Agency) is a body governed by European Basic Regulation. EASA was set up in 2003 and conduct specific regulatory and executive tasks in the field of civil aviation safety and environmental protection. EASA's mission is to promote the highest common standards of safety and environmental protection in civil aviation. The task of the EASA has been expanded from airworthiness to air operations and currently includes the rulemaking and standardization of airworthiness, air crew, air operations, TCO, ATM/ANS safety oversight, aerodromes, etc. According to Implementing Rule, Commission Regulation(EU) No 452/2014, EASA has the mandate to issue safety authorizations to commercial air carriers from outside the EU as from 26 May 2014. Third country operators (TCO) flying to any of the 28 EU Member States and/or to 4 EFTA States (Iceland, Norway, Liechtenstein, Switzerland) must apply to EASA for a so called TCO authorization. EASA will only take over the safety-related part of foreign operator assessment. Operating permits will continue to be issued by the national authorities. A 30-month transition period ensures smooth implementation without interrupting international air operations of foreign air carriers to the EU/EASA. Operators who are currently flying to Europe can continue to do so, but must submit an application for a TCO authorization before 26 November 2014. After the transition period, which lasts until 26 November 2016, a valid TCO authorization will be a mandatory prerequisite, in the absence of which an operating permit cannot be issued by a Member State. The European TCO authorization regime does not differentiate between scheduled and non-scheduled commercial air transport operations in principle. All TCO with commercial air transport need to apply for a TCO authorization. Operators with a potential need of operating to the EU at some time in the near future are advised to apply for a TCO authorization in due course, even when the date of operations is unknown. For all the issue mentioned above, I have studied the function of EASA and EU Regulation including TCO Implementing Rule newly introduced, and suggested some proposals. I hope that this paper is 1) to help preparation of TCO authorization, 2) to help understanding about the international issue, 3) to help the improvement of korean aviation regulations and government organizations, 4) to help compliance with international standards and to contribute to the promotion of aviation safety, in addition.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.557-565
• /
• 2021

Path-following control is considered as one of the most fundamental skills to realize autonomous navigation of marine vessels in the ocean. This study addresses with the path-following control for a ship in which there are environmental disturbances in the directions of the surge, sway, and yaw motions. The guiding principle and back-stepping method was utilized to solve the ship's tracking problem on the reference path generated by a virtual ship. For path-following control, error dynamics is one of the most important skills, and it extends to the research fields of automatic collision avoidance and automatic berthing control. The algorithms for the guiding principles and error variables have been verified by numerical simulation. As a result, most error variables converged to zero values with the controller except for the yaw angle error. One of the most interesting results is that the tracking errors of path-following control between two ships are smaller than the existing safe passing distances considering interaction forces from near passing ships. Moreover, a trade-off between tracking performance and the ship's safety should be considered for determining the proper control parameters to prevent the destructive failure of actuators such as propellers, fins, and rudders during the path-following of marine vessels.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.1
• /
• pp.115-157
• /
• 2013

Some contracting States of the Convention on International Civil Aviation (commonly known as the Chicago Convention) issue FAOC(Foreign AOC and/or Operations Specifications) and conduct various safety audits for the foreign operators. These FAOC and safety audits on the foreign operators are being expanded to other parts of the world. While this trend is the strengthening measure of aviation safety resulting in the reduction of aircraft accident, it is the source of concern from the legal as well as economic perspectives. FAOC of the USA doubly burdens the other contracting States to the Chicago Convention because it is the requirement other than that prescribed by the Chicago Convention of which provisions are faithfully observed by almost all the contracting States. The Chicago Convention in its Article 33 stipulates that each contracting State recognize the validity of the certificates of airworthiness and licenses issued by other contracting States as long as they meet the minimum standards of the ICAO. Consequently, it is submitted that the unilateral action of the USA, China, Mongolia, Australia, and the Philippines issuing the FOAC to the aircraft of other States is against the Convention. It is worry some that this breach of international law is likely to be followed by the European Union which is believed to be in preparation for its own unilateral application. The ICAO established by the Chicago Convention to be in charge of safe and orderly development of the international civil aviation has been in hard work to both upgrade and emphasize the safe operation of aircraft. As the result of these endeavors, it prepared a new Annex 19 to the Chicago Convention with the title of "Safety Management" and with the applicable date 14 November 2013. It is this Annex and other ICAO documents relevant to the safety that the contracting States to the Chicago Convention have to observe. Otherwise, it is the economical burden due to probable delay in issuing the FOAC and bureaucracies combined with many different paperworks and regulations depending on where the aircraft is flown. It is exactly to avoid this type of confusion and waste that the Chicago Convention aimed at when it was adopted in 1944. The State of the operator shall establish a system for both the certification and the continued surveillance of the operator in accordance with ICAO SARPs to ensure that the required standards of operations are maintained. Certainly the operator shall meet and maintain the requirements established by the States in which it operate. The authority of a State stops where the authority of another State intervenes or where the former has yielded its power by an international agreement for the sake of international cooperation. Hence, it is not within the realm of the State to issue FAOC towards foreign operators for the reason that these foreign operators are flying in and out of the State. Furthermore, there are other safety audits such as ICAO USOAP, IATA IOSA, FAA IASA, and EU SAFA that assure the safe operation of the aircraft, but within the limit of their power and in compliance with the ICAO SARPs. If the safety level of any operator is not satisfactory, the operator could be banned to operate in the contracting States with watchful eyes until the ICAO SARPs are met. This time-honoured practice has been applied without any serious problems. Besides, we have the new Annex 19 to strengthen and upgrade with easy reference for contracting States. We don't have no reason to introduce additional burden to the States by unilateral actions of some States. These actions have to be corrected. On the other hand, when it comes to the carriage of the Personal or Pilot Log Book, the Korean regulation requiring it is in contrast with other relevant provisions of USA, USOAP, IOSA, and SAFA. The Chicago Convention requires in its Articles 29 and 34 only the carriage of the Journey Log Book and some other certificates, but do not mention the Personal Log Book at all. Paragraph 5.1.1.1 of Annex 1 to the Chicago Convention even makes it clear that the carriage in the aircraft of the Personal Log Book is not required on international flights. The unique Korean regulation in this regards giving the unnecessary burden to the national flag air carriers has to be lifted at once.

• Journal of Internet Computing and Services
• /
• v.21 no.4
• /
• pp.117-126
• /
• 2020

A maritime object detection system is an intelligent assistance system to maritime autonomous surface ship(MASS). It detects automatically floating debris, which has a clash risk with objects in the surrounding water and used to be checked by a captain with a naked eye, at a similar level of accuracy to the human check method. It is used to detect objects around a ship. In the past, they were detected with information gathered from radars or sonar devices. With the development of artificial intelligence technology, intelligent CCTV installed in a ship are used to detect various types of floating debris on the course of sailing. If the speed of processing video data slows down due to the various requirements and complexity of MASS, however, there is no guarantee for safety as well as smooth service support. Trying to solve this issue, this study conducted research on the minimization of computation volumes for video data and the increased speed of data processing to detect maritime objects. Unlike previous studies that used the Hough transform algorithm to find the horizon and secure the areas of interest for the concerned objects, the present study proposed a new method of optimizing a binarization algorithm and finding areas whose locations were similar to actual objects in order to improve the speed. A maritime object detection system was materialized based on deep learning CNN to demonstrate the usefulness of the proposed method and assess the performance of the algorithm. The proposed algorithm performed at a speed that was 4 times faster than the old method while keeping the detection accuracy of the old method.

• Journal of Korean Society of Transportation
• /
• v.23 no.6 s.84
• /
• pp.41-53
• /
• 2005

The effective utilization of an airport is considerably influenced by natural features and man-made structures inside and outside its boundary. These obstacles affect the airspace available for approaches and departures and the weather minima which dictates the necessary weather conditions for aircraft to be allowed to take-off or land. Certain areas of the airspace near airports must be regarded as the integral parts of the airport system. The availability of the required airspace is as important as are the runway and their associated strips to the safe and efficient use of the airport. For these reasons, ICAO and the member states have established the standards regarding the obstacle limitation surfaces and regulated the construction of the man-made structures in and beyond the surfaces. Existing objects that extend above a obstacle limitation surfaces should as for as practicable be removed except when, in the opinion of the appropriate authority, an objects is shielded an existing immovable objects, or after aeronautical study it is determined that the object would not adversely affect the safety or significantly affect the regularity of operations of airplanes. However, Korea's aviation law does not specified the outer horizontal surface in the obstacle limitation surfaces, while ICAO and most member states do. The absence of the outer horizontal surface regulation has created legal disputes between regulating agencies and private parties. The case study in this paper found that a skyscraper planned beyond Korea's obstacle limitation surfaces does affect the flight safety and the efficient use of an airport. Therefore, in areas beyond the obstacle limitation surfaces. those objects which extend to a height of 150m or more above ground elevation should be regarded as obstacle, unless a special aeronautical study indicates that they do not constitute a hazard to airplanes. We proposed low alternative regulatory schemes for resolving the issues raised in this paper, and we recommended to adopt ICAO's standards and recommended practices.

• Journal of Space Technology and Applications
• /
• v.2 no.2
• /
• pp.121-136
• /
• 2022

Automatic Identification System used in ship communication is required for marine control way, including monitoring of vessel operation in coastal and exchanging of information for safety navigation between them. But, it uses a very high frequency band of approximately 160 MHz, and at the same time, due to the curvature of Earth, there is a limit to the communication distance. Several demonstrations were made successfully over satellite, but not much work has been done yet through cube-satellite which has low-orbit at 500 km altitude. Here, we demonstrate a reception test of AIS (automatic identification system) receiver for a cube-satellites using software-defined radio (SDR). We collected AIS data from ship at port of Busan, Korea, using R8202T2 SDR and established to transmit them using Adam-Pluto and Matlab Simulink. The process of weakening the signal strength to a satellite was constructed using attenuator. Through above process, we demonstrated whether AIS data was successfully received from the AIS payload.