• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.8
• /
• pp.549-556
• /
• 2012

T-P removal efficiency was analyzed according to the metal to initial T-P ratio (mole basis) with respect to the samples from different WWTPs having various initial T-P and SS conditions. Also, operating costs were calculated based on the injected coagulant amount and the amount of sludge production. Most experiments were conducted by the standard jar-test protocol. Molar ratio of coagulant dose was varied considerably according to the initial SS concentration range in secondary clarifier effluent samples which had above 0.5 mg/L of initial T-P. Based on 90% T-P removal efficiency, results were: At the initial SS range of below 10 mg/L, Alum (8%) = 11 mol Al/mol P needed and PAC (17%) = 9.6 mol Al/mol P needed; At the initial SS range of above 10 mg/L, Alum (8%) = 3.9 mol Al/mol P needed and PAC (17%) = 3.2 mol Al/mol P needed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1163-1170
• /
• 2016

A hardware implementation of ultra-lightweight block cipher algorithm PRESENT which was specified as a standard for lightweight cryptography ISO/IEC 29192-2 is described. The PRESENT crypto-processor supports two key lengths of 80 and 128 bits, as well as four modes of operation including ECB, CBC, OFB, and CTR. The PRESENT crypto-processor has on-the-fly key scheduler with master key register, and it can process consecutive blocks of plaintext/ciphertext without reloading master key. In order to achieve a lightweight implementation, the key scheduler was optimized to share circuits for key lengths of 80 bits and 128 bits. The round block was designed with a data-path of 64 bits, so that one round transformation for encryption/decryption is processed in a clock cycle. The PRESENT crypto-processor was verified using Virtex5 FPGA device. The crypto-processor that was synthesized using a $0.18{\mu}m$ CMOS cell library has 8,100 gate equivalents(GE), and the estimated throughput is about 908 Mbps with a maximum operating clock frequency of 454 MHz.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.128-141
• /
• 2017

This paper analyzes the under-researched field of the characteristics of th Chosun private railway, such as laws, systems, human resources, and subsidies associated with this railway, in an effort to increase our understanding of these characteristics. It was found that the private railway shared strong identity resemblance with a national project, as it served to assist the roles of the main national railway. General patterns of change of the company indicate that the private railway received increased subsidies consequent to the amendment of a related law and that it was strongly influenced by Japan's railway policies. The private railway system during the Chosun period more subsidies than those administered by Japan, and they tended to depend on fund raising for external capital. A tendency of many board members to be from the Chosun bureau was also noted. Profits in the private railway system were relatively low compared to those of the national railway such that the deficits were supplemented by the subsidies redeived. Based on corroborating examples, the private railway system can be said to have been an organization that had strong connections with national projects. It was especially related to regional industries according to an examination of the distribution of lines, which shows that most assisted the main railway or coincided with regions undergoing industrial development. Typically, northern areas were for resource development while southern areas were for agricultural production and/or passenger transportation. The company carried dual traits as it operated as a subsidiary enterprise for peripheral profit while also playing a role in transportation.

• Journal of Korean Society of Forest Science
• /
• v.102 no.4
• /
• pp.506-514
• /
• 2013

This study examined the feasibility on the construction of a wood industrialization service center for a wood industry cluster establishment in Jeollanam-do. Construction of the wood industrialization service center is based on a discount rate of 3.5%, an investment period of 4 years, a business operations period of 16 years and an investment cost of 24600 million won; the total amount of the net present value, the cost-benefit ratio and the internal rate of return were assumed to be 2.579 million won, 2.51%, and 10.1%, respectively. In addition, the production inducement coefficient, the induced production effect, the income-induced coefficient, the income inducement effect, the employment inducement coefficient, and the employment inducement effect were estimated 1.4345, 35287 million won, 0.1655, 4000.7 million won, and 0.4665, 1,145 people, in the effects of the wood related industries using the multi-regional input-output model, respectively. Financial independence of operating income to cover its own costs incurred in accordance with the operating project might be practicable.

• Korean Journal of Ecology and Environment
• /
• v.43 no.3
• /
• pp.369-376
• /
• 2010

A novel or canal-type continuous removal of organic matter (C-CROM) with combined freshwater bivalves (Unio douglasiae and Anodonta woodiana) was developed to improve the water quality (IWQ) of eutrophic reservoirs. The first experiment was performed for 12 days to measure the IWQ using 256 individuals of combined bivalves (ca. 7:3), at the same density that distributed in the collection stream. The second experiment was conducted to evaluate the efficacy of IWQ with the addition of each 30% of two mussels for 14 days. Results indicated that a novel C-CROM significantly decreased suspended solids, chlorophyll-$\alpha$, transparency, total nitrogen and phosphorus, and increased ammonium and biodeposition (t-test, P<0.001 for all), while other dissolved inorganic nutrients such as $NO_2$, $NO_3$, and SRP did not change (t-test, P>0.5). Daily IWQ performances of C-CROM with combined mussels was about two times higher to the previous studies using single species where less suspended inorganic nutrients were released except for ammonia. Collectively, a C-CROM is more strategic to the water quality improvement of eutrophic lake.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.9
• /
• pp.469-475
• /
• 2016

The study is the result of an practical operation analysis for the full scale fishery product wastewater treatment plant with immersed MBR (iMBR) process. Since fishery product industries show a wide range of wastewater generation by the season, design and operation of the equalization basin are very important factor. The aeration system for the equalization basin mixing can save the chemical consumption for followed system through the restriction of acid fermentation. The concentrations of wastewater primary DAF process treated were BOD 2,291 mg/L, $COD_{Mn}$ 530 mg/L, SS 256.8 mg/L, T-N 38 mg/L, T-P 13.5 mg/L respectively. It was considered that iMBR is the most efficient biological process for high salinity content wastewater since It is irrelevant to the capability of the sludge precipitation. SADp and SADm were 0.31, $26.5m^3/hr{\cdot}m^3$ respectively. In iMBR process, the critical F/M ratio was derived at 0.08~0.10 gBOD/gMLSS by analysing the correlations between MLSS, normalized TMP and temperature. The effluent concentrations were BOD 1.8 mg/L, $COD_{Mn}$ 12.4 mg/L, SS 1.0 mg/L, T-N 7.85 mg/L, T-P 0.1 mg/L and removal efficiencies were 99.9%, 97.6%, 96.3%, 95.7%, 97.8% respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.795-803
• /
• 2017

This paper describes a dual-standard cryptographic processor that efficiently integrates two block ciphers ARIA and AES into a unified hardware. The ARIA-AES crypto-processor was designed to support 128-b and 256-b key sizes, as well as four modes of operation including ECB, CBC, OFB, and CTR. Based on the common characteristics of ARIA and AES algorithms, our design was optimized by sharing hardware resources in substitution layer and in diffusion layer. It has on-the-fly key scheduler to process consecutive blocks of plaintext/ciphertext without reloading key. The ARIA-AES crypto-processor that was implemented with a $0.18{\mu}m$ CMOS cell library occupies 54,658 gate equivalents (GEs), and it can operate up to 95 MHz clock frequency. The estimated throughputs at 80 MHz clock frequency are 787 Mbps, 602 Mbps for ARIA with key size of 128-b, 256-b, respectively. In AES mode, it has throughputs of 930 Mbps, 682 Mbps for key size of 128-b, 256-b, respectively. The dual-standard crypto-processor was verified by FPGA implementation using Virtex5 device.

• Journal of Korean Society of Transportation
• /
• v.21 no.6
• /
• pp.109-122
• /
• 2003

우리나라는 2004년 4월 경부고속철도개통을 앞두고 마지막 준비를 하고 있다. 1964년10월 고속철도를 가장 먼저 개통한 일본을 비롯한 프랑스, 독일 등은 이미 고속철도가 철도교통의 중심은 물론 각국의 교통수송에 높은 비중을 차지하고 있다. 2001년에 일본이 경우 1일 773,951명을 수송하고 있으며, 프랑스는 228,714명을 수송하고 있다. 세계적으로도 고속철도는 2000년 현재 유럽이 15,350km, 아시아는 2,152,9km를 운영 중에 있는데 이는 2010년에는 유럽은 41,350km, 아시아는 4,755.7km로 증가될 전망이다. 특히 아시아는 2005년 10월 개통예정인 대만의 타이페이와 카오슝의 345km를 비롯하여, 중국은 상해~북경의 1,330km를 2008년 ㅂ구경올림픽에 맞추어 개통을 준비하고 있다. 일본, 프랑스, 독일 등 고속철도의 운영국가들은 고속철도수송의 수송량이 급격하게 증가하고 있다. 프랑스는 인기준으로 1996년에 비해 2001년에 49.3%, 독인은 1996년에 비해 2001년에 70.1%의 증가치를 보이고 있다. 철도수송에서의 고속철도의 비중도 높아 인${\cdot}$km기준으로 일본은 29%, 프랑스는 48.3%, 독일은 15.9%를 차지하고 있다. 이러한 고속철도가 발전한 요인은 항공기와도 경쟁이 될 정도의 빠른 속도와 안전, 높은 사회경제적 효과에 기인하고 있다. 고속철도의 비중이 높은 일본의 경우는 개통 이래 현재까지 약 62억명을 수송하고 있는데 사망사고는 한건도 없었다. 또한 1개 열차의 정시도착 오차는 24초에 불과하고, 항공기와도 경쟁력이 될 정도의 속도와 수송능력을 보유하고 있다. 실제로 500~700km구간에서 항공기와 고속철도이 경쟁이 치열한데 고속철도의 분담율이 67%를 차지하고 있다. 이러한 고속철도 발전으로 철도수송의 증가율에도 큰 영향을 미치고 있다. 프랑스와 독일의 경우는 자동차수송보다 철도수송이 최근 4년간 약 10%이상 증가하고 있는 것도 고속철도의 영향에 기인하고 있다. 고속철도의 또 다른 특징으로는 높은 유발수요효과로 일본의 신간선개통전후를 비교해 보면 예상치보다 약 6%~23%의 높은 수요유발효과를 보이고 있다. 이 결과 각궁의 고속철도는 매우 높은 수익성을 기록하고 있는데 일본은 개통 후 3년째 흑자를 기록하였고, 중국도 개통 후 7년에 단년도 흑자를 예상하고 있다. 이러한 고속철도의 발전에 기초해 유럽을 비롯하여, 아시아 등에서 고속철도의 건설이 더욱 가속화 될 것으로 예상되는데, 이러한 새로운 변화의 고속철도시대에 대비하여 우리나라도 장차 건설계획수립, 해외수출, 고속철도의 상호운영 등을 지금부터 계획을 수립하여 집행해야 할 것이다.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_2
• /
• pp.327-338
• /
• 2018

The possibility of ship detection monitoring at operational level using KOMPSAT-5 Synthetic Aperture Radar (SAR) and Automatic Identification System (AIS) data is investigated. For the analysis, the KOMPSAT-5 SLC images, which are collected from the west coast of Shinjin port and the northern coast of Jeju port are used along with portable AIS data from near the coast. The ship detection algorithm based on HVAS (Human Visual Attention System) was applied, which has significant advantages in terms of detection speed and accuracy compared to the commonly used CFAR (Constant False Alarm Rate). As a result of the integrated analysis, the ship detection from KOMPSAT-5 and AIS were generally consistent except for small vessels. Some ships detected in KOMPSAT-5 but not in AIS are due to the data absence from AIS, while it is clearly visible in KOMPSAT-5. Meanwhile, SAR imagery also has some false alarms due to ship wakes, ghost effect, and DEM error (or satellite orbit error) during object masking in land. Improving the developed ship detection algorithm and collecting reliable AIS data will contribute for building wide integrated surveillance system of marine territory at operational level.

• Journal of Radiation Protection and Research
• /
• v.15 no.2
• /
• pp.113-122
• /
• 1990

After four years of planning, equipment acquisition, facility construction and beam testing, the KCCH cyclotron facility was put into operation in November1986. Now the KCCH cyclotron(MC-50) has been used for four years in neutron therapy and radioisotope production. Up to December 1989, 179(1852 sessions) patient have undergone neutron therapy. Radioisotope production for nuclear medicine use was started from March 1989 after extensive work to overcome target transport, target melting, beam diagnostic and chemical processing problems. This status report introduces the cyclotron facility, and the experiences of neutron therapy and isotope production with the MC-50 cyclotron. Besides, the operation results and the general troubles of the MC-50 during 1989 are summarized. Total operation time was 1252.5 hours. Four hundred hours were used for neutron therapy of 599 treatment sessions and 832.5 hours for radioisotope production. Total amount of produced raioisotope was 1695 mCi(Ga-67 : 1478mCi, Tl-201 : 107 mCi, I-123 : 25mCi, In-111 : 85mCi). Twenty hours were used for scheduled beam testing. In 1989, 882% of the planned operation were performed on schedule and this rats is improved remarkably compared to 71.0% in 1988.