• Journal of Ocean Engineering and Technology
• /
• v.6 no.2
• /
• pp.41-45
• /
• 1992

In this paper an application technique of moment equation method to solution of nonlinear rolling equation of motion of ships is investigated. The exciting moment in the equation of rolling motion of ships is described as non-white noise. This non-white exciting moment is generated through use of a shaping filter. These coupled equations are used to generate moment equations. The nonstationary responses of the nonlinear system are obtained. The results are compared with those of a linear system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.2
• /
• pp.91-98
• /
• 1993

A two-dimensional turbulence model for the surface discharge of heated water into cross-flow field has been developed. The depth-averaged continuity, momentum and temperature equations, are solved by an efficient finite-difference procedure known as SIMPLE. Turbulent stresses and heat fluxes are determined from a depth-averaged version of the $textsc{k}$-$\varepsilon$ equation. Results of test run clearly demonstrate its effectiveness in handling strong turbulent phenomena in very shallow near-field region.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.3
• /
• pp.50-56
• /
• 1997

본 논문은 다물체동역학에서의 민감도해석을 위하여 개발된 혼합법(Mixed method)을 보여준다. 이 방법은 해석적인 미분의 유도와 수치적인 미분의 장점을 함께 사용한다. 해석적인 유도는 기본적인 전체의 미분에서 사용 되며 여기서 나온 각 세부 미분항은 수치적인 미분방법에 의존한다. 이로인하여 세부미분항을 다물체의 운동방정식 에서 유도할 때 발생하는 어려움을 제거한다. 여기서 사용되는 운동 방정식은 Joint Coordinate 방정식을 사용하며, 이 방정식의 계산시간과 정확도에 의해 민감도해석에서도 정확도와 계산시간의 효율을 향상시킬 수 있게 된다. 예제로서 자동차 Suspension 시스템의 승차감을 최적화하기 위한 민감도 해석을 수행하였으며, 여기서 혼합법이 차등미분법과 상응한 결과를 보였다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.13 no.3
• /
• pp.141-147
• /
• 1984

2차원 채널 입구에서의 꿰떼 난류 유동하는 찬 물 위를, 같은 방향으로 빠르게 난류 유동하는 수증기의 응축은 액체필름 초기상태의 과냉 정도에 의하여서 응축능력이 정하여진다. 수증기와 액체의 채널 입구에서의 균일한 속도 및 온도, 그리고 채널 입구에서 액체와 증기가 차지하는 체적비, 즉 액체필름과 채널 높이를 알고 있을 때, 하류로 유동하면서 응축이 일어나는 현상을 예측하는 모델을 제안하고, 실험치와 비교한 것이다. 채널 입구에서 윗쪽으로는 더운 기체, 아래쪽으로는 찬 액체가 평행한 방향으로 유동하면서 접촉하고 평균적인 액체필름의 두께와 단열된 채널 벽체를 가정하여서, 기본방정식으로 연속방정식, 운동방정식을 세우고. 에너지와 운동량 전달 메카니즘 사이에 유사성이 존재한다고 가정하였으며, 전단응력의 크기는 필자의 모델을 적용하였다. 기본방정식을 기체 속도, 액체 속도, 필름의 두께, 압력에 대해서 수치해를 구하여서 동일조건 하에서 실험한 데이터와 비교하였다. 수증기와 액체 경계면에서의 전단응력은 매우 좋은 일치를 보여주고 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.3
• /
• pp.213-220
• /
• 2014

A program that predicts trajectories of projectiles influenced by the interference flow field of helicopters is developed. The interference flow field are computed using a compressible inviscid solver in conjunction with an actuator disc model. The trajectories are predicted using 6-DOF (Degree of Freedom) equations as well as an alternative form of modified point mass equations of motion. The method for the interference flow field prediction method are validated with ROBIN(ROtor Body INteraction) model. A Sierra international bullet and a 105mm projectile are used to validate the trajectory method. Trajectories of a Sierra International bullet and a HYDRA 70 rocket firing from a helicopter are predicted.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.6
• /
• pp.615-621
• /
• 2014

The Addiction problems have been became a social problem; the social efforts continue to solve these problems. One of those efforts, we need to establish a mathematical modeling for an addictive model to perform analysis of behavior by using this modeling. We need to process the research that can be judged before and after addictive status with result of the behavior analysis. We have to process an observation of transition from before to after addictive status. According to those necessary, this paper proposed the physical exercise model that is composed by novel second order system, which consisted of Spring-Damper-Mass system with equivalence in order to evolve an addictive equation for physical exercise. This paper also is analyzed by the behaviors for those the addictive equation of physical exercise.

• The Journal of the Korea Contents Association
• /
• v.9 no.10
• /
• pp.206-217
• /
• 2009

The purpose of this study was to investigate the cause-effect relationship between motor impairments, hand function, gross motor function and activities of daily living (ADL) in children with cerebral palsy through the analysis of structural equation modeling. For this, 105 children with cerebral palsy (between 6 and 12 years old) were assessed about muscle tone and strength, range of motion, abilities of selective motor control, hand function, gross motor function and ADL. The results of this study were follows: Firstly, there were significant correlations between motor impairments of muscle tone, muscle strength, the abilities of selective motor control and ADL (p < .05); Secondly, a good correlation between the gross motor function, hand function and ADL was found in all children (p < .05); Thirdly, the appropriateness of research model was good. This study focused on exploration of the relationship between the motor impairment, gross motor function, hand function and ADL through structural equation modeling.

• Nuclear Engineering and Technology
• /
• v.19 no.3
• /
• pp.198-204
• /
• 1987

A plant simulation code, MCSIM (Micro-Computer SIMulator), has been developed to simulate plant transient accidents for pressurized water reactors. Reactor coolant system is modeled using decoupled energy and momentum equations, drift flux two-phase flow model and integral momentum equation. A two-fluid pressurizer model is used to simulate the pressurizer dynamics. Pot Boiler model is used for steam generator, steady-state decoupled energy and momentum equations for secondary side system, and point kinetics equations for nuclear power calculation. For test of the present version of MCSIM, complete loss of flow and RCCA withdrawal accidents are calculated with MCSIM. The results are compared with those in FSAR of KNU 5 & 6.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.3 s.36
• /
• pp.509-523
• /
• 1998

A consistent finite element formulation and analytic solutions are presented for stability of thin-walled circular arch. The total potential energy is derived by applying the principle of linearized virtual work and including second order terms of finite semitangential rotations. As a result, the energy functional corresponding to the semitangential moment is newly derived. Analytic solutions for the out-of-plane buckling of symmetric thin-walled curved beam subjected to pure bending or uniform compression with simply supported boundary conditions are obtained. For finite element analysis, the cubic Hermitian polynomials are utilized as shape functions and $16{\times}16$ stiffness matrix for curved beam elements and $14{\times}14$ stiffness matrix for straight beam elements are evaluated, respectively. In order to illustrate the accuracy of this study, analytical and numerical results for lateral buckling problems of circular arch are presented and compared with available analytical solutions.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.1
• /
• pp.41-54
• /
• 1999

For free vibration of non-symmetric thin-walled circular arches including restrained warping effect, the elastic strain and kinetic energy is derived by introducing displacement fields of circular arches in which all displacement parameters are defined at the centroid axis. The cubic Hermitian polynomials are utilized as shape functions for development of the curved thin-walled beam element having eight degrees of freedom. Analytical solution for in-plane free vibration behaviors of simply supported thin-walled curved beams with monosymmetric cross-sections is newly derived. Also, a finite element formulation using two noded curved beams element is presented by evaluating elastic stiffness and mass matrices. In order to illustrate the accuracy and practical usefulness of this study, analytical and numerical solutions for free vibration of circular arches are presented and compared with solutions analyzed by the straight beam element and the ABAQUS's shell element.