• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.11a
• /
• pp.353-356
• /
• 2000

두 물체의 충격운동량-충격 및 탄성파 발생의 순으로 작용하도록 하면 계 내에서 충돌 후 생기는 운동량의 관성 속도와 충돌기간동안 발생하는 탄성파의 충격에너지 전달속도가 다른 경우가 있다. 이것은 충돌기간동안 총 운동량은 보존되나 선 운동량이 비 보존되는 경우가 있어서 충돌기간동안 비 보존된 내부 운동량의 시간 적분만큼 충돌을 가한 질량중심이 이동했다는 의미이다. 충돌기간동안 충격파는 탄성파에 근사시키고 그것은 군속도에 근사시켜 이론적 근거를 만들고 실험에 의해 확인했다. 폐쇄된 계 내에서 내부에너지를 이용하여 특별한 두 물체의 충돌기간동안 비 보존되는 운동량 때문에 질량중심이 이동되는 것에 대해 해석한다.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.93-99
• /
• 2011

안전모는 낙하, 비례물에 대한 두부를 보호하는 보호구로 낙하물의 충격을 일부 흡수하여 완화시켜주는 기능을 하고 있다. 안전모 충격 흡수 성능으로 최고전달충격력이 있으나 낮을수록 성능이 좋은 것으로 나타나지만 안전모 제조과정에서 얼마 만큼의 충격이 흡수되는지는 알 수 없었다. 이로 인하여 성능 향상을 위한 충격력의 명확한 제어 가능한 성능 향상의 기준을 잡는데 어려움이 있었다. 본 연구에서는 충격량과 연관된 반발계수로 충격흡수 성능의 정도를 찾고자 하였다. 연구 대상은 시중에서 주로 착용되고 있는 ABS 재질의 안전인증 합격품을 대상으로 선정 하였다. 연구 방법으로는 운동량과 충격량의 이론으로 안전모 충격흡수성능 시험장치를 활용하여 인두에 전달된 충격량을 활용하여 충격흡수시의 반발계수를 구하고, 충격을 흡수치 않을 때를 가정하여 추정 충격력 곡선을 유도하고 충격흡수 전의 추정 최고 전달충격력과 반발계수를 구하여 충격흡수의 성능을 나타내었다. 연구결과 국내 안전인증 H사의 안전모의 최고전달충격력은 4100 N 이였고, 충격흡수 성능은 400 N 으로 약 9 %를 흡수되는 것으로 나타났다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1769-1771
• /
• 2015

스마트 기술이 발전하면서 건강 및 헬스에 대한 연동 기술이 날로 높아지고 있다. 본 연구에서는 헬스 및 건강증진 센터에 설치된 무-전원 운동기구(근력운동기구)에 대해 스마트 기술 연결로 운동량 및 전기 발전량을 측정하고 스마트 기기에 무선으로 전달하는 방법을 연구했다. 이로써 운동을 하면서 운동량을 측정하고, 전력생산모듈을 운동기구에 부착해 전기 생산을 동시할 수 있는 다목적의 시스템을 연구했다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.9
• /
• pp.847-854
• /
• 2013

The objective of this study is to experimentally investigate the mixed flow and oxygen transfer characteristics of a horizontally injected aeration process using an annular nozzle ejector. The flow rate ratio, pressure ratio and ejector efficiency are calculated using the measured flow rate and pressure with the experimental parameters of the ejector pitch and primary flow rate. The visualization images of mixed flow issuing from the ejector are analyzed qualitatively, and the volumetric oxygen transfer coefficients are calculated using the measured dissolved oxygen concentration. The mixed flow behaves like a buoyancy jet or horizontal jet owing to the momentum of primary flow and air bubble size. The buoyancy force of the air bubble and the penetration of mixed flow are found to be important parameters for the oxygen transfer rate owing to the contact area and time of two phases.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.987-991
• /
• 2011

In this paper, a health care system is implemented which can identify the parameter for moving body after exercising based on home network. This system has catched a signal for physical condition of body data using data acquisition mechanism such as a data acquisition module, a data signal processing module and a feedback module. The composition has a functions of displacement point for a BMI and WDI, that the basic parameter measure to base on the heart rate, temperature. There are checked physical condition of body exercising to compounded a physical condition of sensory organ. There are to keep the lookout for the body condition that to estimate a health care with a physical organ through a exercise.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.65-67
• /
• 2017

Various combustion modeling approaches have been developed and verified in a combustion system such as rockets, gas turbines, and so on. This study introduces basic theory and recent research activities on 1D network model where a system is divided into a series of acoustic element and mass/momemtum/energy conservations are applied in the component. Each component is connected to the neighboring ones with proper jump conditions. Flame transfer function and acoustic transfer function are determined and effects of the each function on the system instability is investigated.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.4
• /
• pp.365-370
• /
• 2020

The purpose of this study was to accurately measure the load generated on the leg according to the position of the sling strap supporting the leg during the sling bridge exercise for improvement of life care. Ten Healthy university students participated in two trials: knee bridge exercise and ankle bridge exercise in supine position. The loads transmitted to the knees and ankles were measured when a bridge exercise was performed with a sling strap on both knees and ankles. As a result of the study, it was confirmed that the load of sling bridge exercise with both knees supported was statistically greater than the load of sling bridge exercise with both ankles supported(p<.01). On the other hand, there was no statistically significant difference in the load between both knees and both ankles (p>.05). Therefore this study is meaningful in that it objectively measured the load on the leg during sling bridge exercise, and is thought to be helpful in setting exercise intensity during sling exercise.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2002

When a body enters waters, its original kinetic energy or momentum is distributed among the body and surrounding water in the form of added mass. Due to the transfer of the energy or momentum, the bode is subjected to the hydrodynamic impact forces and acceleration. This impact behavior can be an important criterion of submersible vehicle launched to the air. In this paper, based on Life-boat model, an approximate method is proposed for the evaluation of the forces and responses of cylindrical rigid bode by water entry impact. The impact forces are calculated by yon Karman's momentum theory and motion responses the body, especially acceleration, are calculated by a numerical integration of the motion equations derived by hydrodynamic force equilibrium. The proposed method is expected to be a simple but efficient tool lot the preliminary design or motion analysis of a body subjected to water entry impact.

• Journal of Korea Multimedia Society
• /
• v.8 no.10
• /
• pp.1322-1328
• /
• 2005

The circulation flows passing through the Ekman boundary layer on the rotating disk and transfer the angular momentum into the interior region of the container. Consequently, the circulation enhances the momentum transfer and the interior fluid is divided by a propagating shear front. This investigation focuses on computer vision and image processing technique for analysis of Non-Newtonian Fluids. To visualize marching velocity shear front for the transient flow, a particular shaped particles and light are used. To validate the proposed method, quantitative image are compared with the optical data acquired by a direct measurement of LDV (Laser Doppler Velocimetry).

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.108-109
• /
• 2002

Optical tweezers는 광압(radiation pressure)을 사용하여 입자들을 포획하거나 조절할 수 있다는 점에서 마이크로스케일의 유전체구뿐만 아니라 세포에서도 널리 사용되고 있다. 일반적으로 빛이라는 것은 광자들의 집합체로서 광자의 입자성으로 인하여 외부의 물체와 충돌시 운동량을 전달하게 되고 이것을 광압(radiation pressure)이라고 하며 optical tweezers [1]는 이 광압을 이용한 방법중 하나이다. 레이저빔을 입자에 집속 시켜 주게 되면 입자는 광압에 의해서 gradient force와 scattering force의 힘을 받게 된다. (중략)