• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.109-121
• /
• 2023

Squr dikes in rivers can enhance various ecological environments, contributing to the improvement of the river's environmental functions. However, the alterations in flow caused by squr dikes not only enhance environmental functions but can also have adverse effects. Therefore, this study aimed to analyze the flow changes induced by the installation of squr dikes through flume experiments and assess their impact on fish habitats. Key factors in the fish habitat environment include flow velocity, turbulence kinetic energy, and recirculation zones. Among these, particular emphasis was placed on examining turbulence kinetic energy and recirculation zones. Experimental conditions were set by varying the interval and submergence of the squr dikes, resulting in a total of eight experimental cases. The results revealed that shorter interval and lower submergence of the squr dikes led to increased turbulence kinetic energy and recirculation zone sizes, significantly impacting fish habitats.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.378-385
• /
• 2012

Vent mixer can provide main flow directly into a recirculation region downstream of the mixer to enhance fuel-air mixing efficiency. Based on experimental results of three-dimensional velocity, vorticity and turbulent kinetic energy obtained by a stereoscopic PIV method, the performance of the vent mixer was compared with that of the step mixer which was used as a basic model. Thick shear layers of the vent mixer induced the increase of the penetration height. The turbulent kinetic energy mainly distributed along a boundary layer between the main flow and the jet plume. This turbulent field activates mass transfer in a mixing region, leading to the mixing enhancement.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.2
• /
• pp.97-104
• /
• 2005

A simple but efficient grid generation technique by using the modified compressible form of stream function has been formulated. Transformation of a physical plane to a streamline plane, the Von Mises Transformation, has been widely used to solve the differential equations governing flow phenomena, however, limitation arises in low velocity region of boundary layer, mixing layer and wake region where the relatively large grid spacing is inevitable. Modified Von Mises Transformation with simple mathematical adjustment for the stream function is suggested and applied to solve the confined coaxial turbulent jet mixing with simple $\kappa-\epsilon$ turbulence model. Comparison with several experimental data of axial mean velocity, turbulent kinetic energy, and Reynolds shear stress distribution shows quite good agreement in the mixing layer except in the centerline where the turbulent kinetic energy distributions were somewhat under estimated. This formulation is strongly suggested to be utilized specially for free turbulent mixing layers in axisymmetric flow conditions such as the investigation of mixing behavior, jet noise production and reduction for Turbofan engines.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10b
• /
• pp.475-479
• /
• 2006

환자의 체동은 MRI에 의해 제공된 영상의 화질을 저하시키는 주된 원인이 되고 있다. 이에 본 논문에서는 MRI내 3차원 강체운동에 기인한 아티팩트를 제거하는 방법을 제안한다. 이러한 제거 목표를 달성하기 위해 MRI 영상 데이터를 얻기위한 2차원 다-슬라이스 방법(a multiple two dimensional slice technique)이 사용되어 왔다. 대상물체의 운동에 해당하는 수집된 MRI 데이터는 불균일한 표본화와 위상오차에 의해 영향을 받게된다. 3차원 강체운동에 대해 주어진 운동 파라메타와 장면간의 영향이라는 가정하에 양선형 보간법과 중첩법으로 다-슬라이스 데이터를 사용하는 방법에 기초한 재구성 알고리즘을 MRI 아티팩트를 제거하는데 사용한다. 미지의 체동 파라메타를 추정하기 위해 3차원 강체운동은 다-슬라이스 취득방법의 각 영상과 결합된 관심영역 바깥쪽에서 측정된 에너지를 증가시킨다는 사실을 이용하는 최소에너지법을 사용한다. 본 방법의 유효성을 확인하기 위해 3차원 강체운동에 의해 화질이 저하된 스핀-에코우 영상에 적용한 결과 화질이 식별될 수 있을 정도로 개선됨을 확인하였다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.151-157
• /
• 1999

In this study, tile characteristics of three dimensional flow fields in centrifugal flump impeller are investigated by numerically. Detailed analysis and understanding of flow field in centrifugal pump are very important to predict performance of components. The three dimensional viscous fluid flow in centrifugal pump is distingushed isentropic process region from irreversible process region by wall shear effect, secondary flow, centrifugal and Coriolis forces, variation of boudary layers. Development of low momentum region by viscous fluid flow in the centrifugal impeller causes stall and blockage which is irreversible process region, and resulting in decrease of the performance and efficiency of centrifugal pump. Especially, the result is that Coriolis and centrifugal forces are most powerful factors which are increasing the irreversible region.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.251-254
• /
• 2004

환자의 체동은 MRl에 의해 제공된 화질을 저하시키는 주된 원인이 되고 있다. 본 연구에서는 MRI에 있어서 3차원 강체운동에 기인한 아티팩트를 수정하는 기법을 제안한다. 이러한 목표를 달성하기위해 MR 화상 데이터를 얻기위한 2차원 다-슬라이스 기법(a multiple 2-D slice technique)이 사용되어왔다. 대상물체의 운동에 해당하는 수집된 MRI 데이터는 불균일 표본화와 위상오차에 의해 영향을 받게된다. 3차원 운동에 대해 주어진 운동 파라메타와 장면간의 영향이라는 가정하에 양선형보간법과 중첩법으로 다-슬라이스 데이터를 사용하는 방법에 기반한 재구성 알고리즘을 MRI 아티팩트를 수정하는데 사용한다. 미지의 체동 파라메타들을 추정하기위해 3차원 강체운동은 다-슬라이스 취득기법의 각 영상과 결합된 관심영역 바깥쪽에서의 측정된 에너지를 증가시킨다는 사실을 이용하는 최소에너지법을 적용한다.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.131-142
• /
• 1997

In this paper the kinematics of damage for finite elastoplastic deformations is introduced using the fourth-order damage effect tensor through the concept of the effective stress within the framework of continuum damage mechanics. Unlike the approach of strain equivalence or energy equivalence, which is applicable only to small strains, the proposed kinematic description provides a relation between the effective strain and the damage elastoplastic strain in finite deformation. This is accomplished by directly considering the kinematics of the deformation field both real configuration. The proposed approach shows that it is equivalent to the hypothesis of energy equivalence at finite strains. The damage effect tensor in this work is explicitly characterized in terms of a kinematic measure of damage in the elastoplastic domain through a second-order damage tensor.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.337-340
• /
• 2000

비디오객체 추출 기법은 MPEG-4 및 MPEG-7의 응용을 목표로 최근 활발하게 연구되고 있다. 이들 연구는 객체 추출의 전체적인 구조와 정확한 윤곽선 검출 알고리즘의 개발에 초점을 맞추고 있으며 제한적인 조건하에서 만족할 만한 성능을 내고 있다 그러나, 카메라 움직임, 객체의 빠른 움직임, 비강체 운동 등 보다 일반적인 상황에서는 객체 추출의 안정성이 떨어진다. 본 논문에서는 객체 추출의 안정성을 높이기 위해 칼라, 움직임 정보 등의 특징정보(feature)가 균일한 영역으로 사전분할하고, 분할된 균일영역을 추적하는 알고리즘을 제안한다. 추적된 균일 영역간의 경계는 각 영역의 통계적 분포와 영역경계의 윤곽선으로 정의된 에너지를 레벨셑 방법으로 최소화함으로 조정된다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.4
• /
• pp.50-56
• /
• 2012

Vent mixer can provide main flow directly into a recirculation region downstream of the mixer to enhance fuel-air mixing efficiency. Based on experimental results of three-dimensional velocity, vorticity and turbulent kinetic energy obtained by a stereoscopic PIV method, the performance of the vent mixer was compared with that of the step mixer which was used as a basic model. Thick shear layers of the vent mixer induced the increase of the penetration height. The turbulent kinetic energy mainly distributed along a boundary layer between the main flow and the jet plume. This turbulent field activates mass transfer in a mixing region, leading to the mixing enhancement.

• Geophysics and Geophysical Exploration
• /
• v.15 no.3
• /
• pp.121-128
• /
• 2012

Absorbing boundary conditions are used to mitigate undesired reflections that can arise at the model's truncation boundaries. We apply a complex frequency shifted perfectly matched layer (CFS-PML) to elastic wave modeling in the frequency domain. Modeling results show that the performance of our implementation is superior to other absorbing boundaries. We consider the coefficients of CFS-PML to be optimal when the kinetic energy becomes to the minimum, and propose the modified CFS-PML that has the CFS-PML coefficient ${\alpha}_{max}$ defined as a function of frequency. Results with CFS-PML and modified CFS-PML are significantly improved compared with those of the classical PML technique suffering from large spurious reflections at grazing incidence.