• Journal of Soil and Groundwater Environment
• /
• v.12 no.1
• /
• pp.73-86
• /
• 2007

Risk-based remediation strategy (RBRS) is a consistent decision-making process for the assessment and response to chemical release based on protecting human health and the environment. The decision-making process described integrates exposure and risk assessment practices with site assessment activities and remedial action selection to ensure that the chosen actions are protective of human health and the environment. The general sequences of events in Tier 1 is as follows: initial site assessment, development of conceptual site model with all exposure pathways, data collection on pollutants and receptors, and identification of risk-based screening level (RBSL). If site conditions do not meet RBSL, it needs further site-specific tier evaluation, Tier 2. In most cases, only limited number of exposure pathways, exposure scenarios, and chemicals of concern are considered the Tier 2 evaluation since many are eliminated from consideration during the Tier 1 evaluation. In spite of uncertainties due to the conservatism applied to risk calculations, limitation in site-specific data collections, and variables affecting the selection of target risk levels and exposure factors, RBRS provides us time- and cost-effectiveness of the remedial action. To ensure reliance of the results, the development team should consider land and resource use, cumulative risks, and additive effects. In addition, it is necessary to develop appropriate site assessment guideline and reliable toxicity assessment method, and to study on site-specific parameters and exposure parameters in Korea.

• Food Science of Animal Resources
• /
• v.20 no.2
• /
• pp.159-165
• /
• 2000

Glycomacropeptide(GMP) was purified from cheese whey which is obtaining as a byproduct in cheese producing. Cheese whey was first concentrated 10 times with a ultrafiltration aparratus, and then heated at 95$^{\circ}C$ for 5 min. The concentrated fraction was centrifuged at 20,000$\times$g for 30 min to remove fat layer. The supernatant layer enriched GMP protein was fractionated by ion exchange chromatography on DEAE-Sepharose Fast Flow column. GMP was bound to DEAE resin and eluted with 0.1~0.25 M NaCl when using a linear NaCl gradient from 0 M to 0.5 M. The purified GMP gave a single band of 24 kDa which seems to be trimer molecular weight in SDS-PAGE, and migrated to the same molecular weight with control GMP obtained commercially. Its amino acid composition were consistent with that of standard GMP. About 0.71 g of GMP was recovered from 1 L of cheese whey. These results indicate that glycomacropeptide could be simply purified from cheese whey by using ultrafiltration and DEAE column chromatography.

• Korean Journal of Food Science and Technology
• /
• v.4 no.4
• /
• pp.271-275
• /
• 1972

Effects of solvent extraction by immersion on the quality and storage stability of Korean rice were studied. Proportions of lipid extracted from whole grain of rice by immersing into two volumes(v/wt) of hexane and ethanol for 72 hours at room temperature were 0.41% and 0.38% respectively. Small changes of water content and hardness of rice were observed by solvent treatment. Cooking characteristics; that is, water-uptake ratio. extended volume, total solid, and starch-iodine blue test of rice was markedly changed by ethanol treatment, while little changes were observed by hexane treatment. No considerable differences in moisture sorption isotherm of rice were observed by both solvent treatments. Changes in TBA number and stale flavor appearance of rice treated with or without solvent immersion during storage at $60^{\circ}C$ showed that rice treated with hexane had best storage stability compared to ethanol treatment, while ethanol treatment of rice had better storage stability than no treatment. Similar results were noted in changes of the flavor score of cooked rice samples which were freeze dried.

• Food Science and Preservation
• /
• v.24 no.5
• /
• pp.615-622
• /
• 2017

This study investigated the antioxidant and antidiabetic activities of Stachys sieboldii Miq. extracts by solvents (water, ethanol, butanol, chloroform, and hexane). The contents of total polyphenols (7.18-37.25 mg/g) and flavonoids (0.21-5.21 mg/g) in extracts from Stachys sieboldii Miq. showed a significant difference dependent on the extraction solvents, butanol > ethanol > water > chloroform > hexane. Antioxidant activities by DPPH and ABTS radical scavenging were increased in a dose-dependent manner. These activity trends associated with the extraction solvent were different at each concentration, but resembled phenolic compound contents trend, generally. FRAP value increased in a dose-dependent manner, but there was a difference in radical scavenging activities when comparing between extraction solvents by butanol > ethanol > hexane > chloroform > water on all concentrations. The trend of ${\alpha}$-amylase inhibition of extracts from $1,000{\mu}g/mL$ to $2,000{\mu}g/mL$ was not affected as enzyme activity is promoted and not inhibited. The inhibition of ${\alpha}$-glucosidase was increased in a dose-dependent manner without water extracts, the activity on hexane extracts was higher than others per the extraction solvent. ${\alpha}$-Glucosidase inhibition of hexane extracts showed 57.76% at $250{\mu}g/mL$, which is 2.8 times higher than the second highest chloroform extract (20.65%). From these results, we presume that the active ingredients of Stachys sieboldii Miq. is different according to the extraction solvent and also the activity is different by these major functional groups.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.5
• /
• pp.720-726
• /
• 1995

Chemical components relevant to the characteristic taste of the Korean native persimmon(Diospyros kaki, Thumb) leaf tea were analyzed. Samples were processed by using three different methods ; SHT(steamed and then hot-air dried), DHT(dried in the shade, steamed and then hot-air dried) and RHT(roasted and then hot-air dried). The components analyzed were general compositions of dried perisimmon leaves and extracted solution. The composition of moisture, ash, crude lipid and total nitrogen did not show significant variation among different processing methods of the persimmonleaf tea. The contents of caffeine, tannin and vitamin C in persimmon leaf tea were in the range of $178.4~209.8{\mu}mol/g$, 29.1~38.5mg% and 325.3~2084.7mg%, respectively. The vitamin C content was significantly higher in the RHT than other treatments. The contents of caffeine, tannin and vitamin C in the tea extracted solution were in the range of $101.5~130.1{\mu}mol/g$, 15.4~25.9mg% and 111.0~1274.3mg%, respectively. The vitamine C in the tea solution was the highest in the RHT treatment and 61.1% of vitamin C in the leaf tea was extracted out in these processing methods. The major amino acids contained in the leaf tea were in decreasing order glutamic acid, aspartic acid, leucine and phenylalanine, these four amino acids consisting 38.9~39.8% of the total amino acid contained in the persimmon leaf tea. The major amino acids contained in the tea solution were glutamic acid, proline, histidine and arginine. Six kinds of 5'-nucleotides, CMP, AMP, UMP, IMP, GMP and hypoxanthine were detected and CMP was the most abundant component in fresh leaf, leaf tea and tea solution. The second highest 5'-nucleotides in both leaf tea and tea solutions were GMP, AMP and UMP in all processing method. The highest free sugar contained in the fresh leaf tea and tea solution was sucrose.

• Microbiology and Biotechnology Letters
• /
• v.35 no.3
• /
• pp.238-244
• /
• 2007

To identify the useful biological activities and the superiority in quality of Korean traditional liquors, we prepared the alcohol-free concentrates from different types of commercial traditional liquors, Takju ($T1{\sim}T3$), Yakju/Cheongju ($Y-1{\sim}Y-5$), Fruit wine (F-1) and Soju (S-1, S-2), respectively. We investigate their compositions as well as antimicrobial, antioxidant, and anti-thrombosis activity. Among the 11 traditional liquors, Y-3, Y-4, Y-5 and F-1 showed higher total-polyphenol, total-flavonoids and reducing sugars than the others. The strong antibacterial and anti-thrombosis activities were identified in Y-3, Y-4, Y-5 and F-1, and a minor antioxidant activity was found in F-l. The antibacterial activity of the Y-3, Y-4, Y-5 and F-1 alcohol-free concentrates showed a broad-spectrum, and growth inhibition was found in gram-positive, gram-negative, and ampicillin-resistant bacteria. The sequential solvent fractionation of Y-3, Y-4, Y-5 and F-1, and following analysis showed that ethyl acetate fractions of Y-3, Y-4, Y-5 and F-1 possess strong antibacterial and anti-thrombosis activity. Especially, the ethyl acetate fractions of Y-3, Y-4 and F-1 showed superior anti-thrombosis activity compared than that of aspirin. Our results suggest that the useful substances are produced from substrates and edible plant added during the fermentation, and the Korean traditional liquors could be developed as strong antibacterial and anti-thrombosis agents.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.704-712
• /
• 2006

This research was designed to investigate the removal of heavy metals, such as $Al^{3+}$, $Cu^{2+}$, $Mn^{2+}$, $Pb^{2+}$ and $Zn^{2+}$, by adsorption on clay minerals. Bentonite(Raw-Bentonite), $Ca^{2+}$ and $Na^+$ ion exchanged bentonite(Ca- and Na-Bentonite) and montmorillonite, such as KSF and K10 from Sigma Aldrich, were used as adsorbents. The component of five inorganic adsorbents was analyzed by XRF, and the concentration of metal ions was measured by ICP. The cation exchange capacity(CEC) and the particle charge of adsorbents were measured. The initial concentration range of metal ions was $10{\sim}100$ mg/L. From the experimental results, it was shown that the adsorption equilibrium was attained after $1{\sim}2$ hours. The maximum percentage removal of $Al^{3+}$, $Cu^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ on Na-Bentonite were more than 98% and that of $Mn^{2+}$ was 66%. $Al^{3+}$ was leached out from KSF with the higher concentration of hydrogen ion. Percentage removals of $Pb^{2+}$ and $Zn^{2+}$ on KSF were 88% and 59%, respectively. In general, the percentage removal of metal ions was decreased with the higher initial concentration of metal ions. The adsorption capacity of metal ions on Na-Bentonite was $1.3{\sim}19$ mg/g. Freundlich equation was used to fit the acquired experimental data. As the results, the adsorption capacity of metal ions was in the order of Na-Bentonite$\gg$Raw-Bentonite$\cong$K10>Ca-Bentonite>KSF. Freundlich constant, K of Na-Bentonite was the largest for metal ions. The order K of Na-Bentonite was Al>Cu>Pb>Zn>Mn, and the adsorption intensity(1/n) was determined to be $0.2{\sim}0.39$.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.95-102
• /
• 2015

In this paper, the effects of sodium hydroxide (NaOH) and aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$) dosage on strength properties were investigated. For evaluating the property related to the dosage of alkali activator, sodium hydroxide (NaOH) of 4% (N1 series) and 8% (N2 series) was added to 1~5% (K1~K5) dosage of aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$) and 1% (C1) and 2% (C2) dosage of calcium oxide (CaO). W/B ratio was 0.5 and binder/ fine aggregate ratio was 0.5, respectively. Test result clearly showed that the compressive strength development of alkali-activated slag cement (AASC) mortars were significantly dependent on the dosage of NaOH and $AlK(SO_4)_2{\cdot}12H_2O$. The result of XRD analysis indicated that the main hydration product of $NaOH+AlK (SO_4)_2{\cdot}12H_2O$ activated slag was ettringite and CSH. But at early ages, ettringite and sulfate coated the surface of unhydrated slag grains and inhibited the hydration reaction of slag in high dosage of $NaOH+AlK(SO_4)_2{\cdot}12H_2O$. The $SO_4{^{-2}}$ ions from $AlK(SO_4)_2{\cdot}12H_2O$ reacts with CaO in blast furnace slag or added CaO to form gypsum ($CaSO_4{\cdot}2H_2O$), which reacts with CaO and $Al_2O_3$ to from ettringite in $NaOH+AlK(SO_4)_2{\cdot}12H_2O$ activated slag cement system. Therefore, blast furnace slag can be activated by $NaOH+AlK(SO_4)_2{\cdot}12H_2O$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.5
• /
• pp.318-324
• /
• 2000

Field experiment was conducted on a sandy clay loam paddy field in the Experimental Farm of the Kangwon National University for four years from 1995 to 1998 to evaluate the effect of different nitrogen fertilizers on soil property and rice yield. The size of each experimental plot was 75 m2. Basal application of fertilizer to the paddy field was on late April, and rice (cv. Odae) was sown with drill seeding on early May. Irrigation was done at 3 leaf stages after rice seeding. Electrical conductivity in soils treated with phosphate- and resin coated slow release fertilizers were relatively greater than those of the other fertilizer application. Available $P_2O_5$ concentration in soils after rice harvest increased significantly compared that in soil before field trial. Rice yield in transplanting culture were $6.516kg\;ha^{-1}$. The rice yield in the direct seeded paddy was 81.9 percents of the yield in the transplanted paddy. The rice yield in phosphate coated slow release fertilizer was the highest among various fertilizer trials in directly seeded dry paddy, while rice yield was the lowest in the organic fertilizer plus urea application. Rice yield between organic fertilizer plus urea and organic fertilizer application were not significantly different. The green manuring effect of rye in the direct seeded rice paddy in Chuncheon was low due to low temperature and short growth period.

• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.334-339
• /
• 2014

The purpose of our study was to investigate the migration level of lead (Pb), cadmium (Cd), antimony (Sb), arsenic (As), hexavalent chromium ($Cr^{6+}$) and mercury (Hg) from cookwares into food simulants and to evaluate the safety of each heavy metals. The test articles for heavy metals were glassware, ceramics, enamel, earthenware, polypropylene and polyethylene cookwares for Pb and Cd, enamel for Sb, earthenware for As, polyethylene and polypropylene cookwares for $Cr^{6+}$ and Hg. All the article samples of 391 intended for contact with foods were purchased in domestic markets. Pb, Cd, Sb and As were analyzed by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), $Cr^{6+}$ by UV visible spectrophotometer and Hg by mercury analyzer. The migration levels of heavy metals in all the samples were within the migration limits of Ministry of Food and Drug Safety (MFDS). As a result of safety evaluation, our results showed that the estimated daily intakes (EDI, mg/kg bw/day) were $9.12{\times}10^{-6}$ and $8.83{\times}10^{-7}$ for Pb and Cd from ceramics and $1.19{\times}10^{-5}$, $1.23{\times}10^{-5}$ and $7.52{\times}10^{-6}$ for Pb, Cd and Sb from enamel. Tolerable daily intakes (TDI, mg/kg bw/day) were established respectively as 0.0036, 0.00081, 0.0021, and 0.0006 for Pb, Cd, As and Hg by JECFA (Joint FAO/WHO Expert Committee on Food Additives), as 0.0060 for Sb by WHO (World Health Organization). When comparing with TDIs, the EDIs accounted for 0.25% and 0.11% for Pb and Cd from ceramics and 0.33%, 1.52% and 0.13% for Pb, Cd and Sb from enamel.