• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.133-141
• /
• 1996

The mode of fatigue failure is depended on the characteristics of the fatigue crack initiated and propagated from the weld toe and the weld root in the load-carrying fillet welded joints. The characteristics of fatigue crack are deeply affected by the geometry of fillet and the stress range. The purpose of this study is to investigate critical weld size and stress range in order to occur toe failure under pulsating tension loading in the load-carrying fillet welded cruciform joints.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.817-827
• /
• 2008

The seismic performance of a column splice fabricated with PJP (partial joint penetration) welds for special moment frames was experimentally evaluated in this study. The steel materials that were used for the specimens included SHN490 and SN490 steel, or the newly developed structural steel for seismic application. Fabricating the column splice with PJP welds is highly attractive from the perspective of reducing the welding cost and the construction time. PJP welds in column splices are viewed apprehensively, however, because several tests have shown that PJP welds in thick members tend to become brittle under tensile loads. The column splices in this testing program were designed for the expected plastic moment of the column that current seismic codes typically require. The design strength of partial-penetration welded joints was determined according to the 2005 AISC-LRFD Specification. Three-point loading was applied monotonically, using a universal testing machine, such thatthe column splice joints were subjected to pure tension. The test results showed that the PJP welded splices, if designed properly, can develop a strength exceeding that of the actual plastic moment of the column. The specimen made of the SM490 rolled section, however, showed a brittle fracture at the splice soon after achieving the actual plastic moment of the column. The tensile coupon test results also showed that the material properties of SM490 steel are more unpredictable. Overall, although the test data are limited, the SHN490 and SN490 steel specimens showed a superior and reliable performance.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.3
• /
• pp.81-88
• /
• 2002

The root joint in the welding structures are apt to failure by the stress concentration which is occurred by the external force. Therefore, in the safety and reliability of structure, the complete penetration joint welding which are obtained by the groove welding with edge preparation is generally required. Nevertheless, fillet T-joint welding without edge preparation is often carried out in the fields to reduce working time and consumption of welding electrode, however, this process is likely to produce inadequate joint penetration such as root gap. In this paper, the focus of research is to investigate distribution of welding residual stresses in the plate(or flange) and web of T-joint weld, and especially in the near of root gap notch that is due to incomplete joint penetration. For the analysis, we have chosen model of T-joint weld in the cases of single and multi-pass welding with submerged arc welding and analyzed model by using finite element programs considering the heat conduction and thermal elasto-plastic theory.

• Proceedings of the KWS Conference
• /
• 2003.11a
• /
• pp.113-116
• /
• 2003

• Journal of Welding and Joining
• /
• v.23 no.6
• /
• pp.18-28
• /
• 2005

본 일반 지침은 용접 이음부나 구조물의 피로강도 평가에 사용되는 기준응력 계산에 관한 내용으로 핫스팟 응력(Hot Spot Stress, 이하 HSS)이라고 칭하는 응력 평가용 해석 기술 및 관련 내용을 다룬다. 국제용접협회 (IIW: International Institute of Welding)발간 지침서의 주요내용에 대한 간략한 소개와 함께 대한용접학회 용접강도연구위원회의 Round-Robin 시험결과를 바탕으로 유한요소 응력해석 기반 용접 이음부의 HSS 평가 방법에 관한 내용을 정리하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.306-309
• /
• 2010

강철도 플레이트거더교의 경우 일반적으로 레일의 폭보다 거더 사이의 폭이 넓기 때문에 거더에 편심이 작용하게 된다. 이러한 편심 영향으로 거더 내측 상부플랜지에 휨변형이 일어나게 되어, 상부플랜지와 수직보강재 용접이음부에 반복하중에 의한 피로균열이 발생되고 있는 것으로 보고되고 있다. 본 연구에서는 공용중인 강철도 플레이트거더교를 대상교량으로 하여 공용하중에 대한 구조해석을 실시하였다. 대상교량에 대한 현장계측을 기초로 구조모델링을 검증하였고, 검증된 구조모델링을 사용하여 열차하중 하에서의 상부플랜지와 수직보강재 용접연결부에서의 피로균열 보강방안에 대한 구조해석을 실시하였다. 또한 상부플랜지와 수직보강재 용접이음부 상세해석을 통하여 피로균열 발생위치를 확인하고 연결이음부의 적절한 보강방안을 제시하고자 한다.

• Journal of Welding and Joining
• /
• v.4 no.1
• /
• pp.16-31
• /
• 1986

스테인레스강의 주요성능은 내식성이기 때문에 부식성의 환경에서 사용되는 일이 많다. 이 때문 에 스테인레스 강제강치에서는 부식에 관계되는 사고가 대단히 많다. 그림1(a)은 일본화학공학협 회가 1987년부터 1982년사이에 화학장치에 발생한 615건의 손상을 종류별로 분류한 것이다. 전면 부식, 공식, 동력부식균열등의 습성환경에서의 전기화학적 부식이 전체의 54%나 점하고 있 다. 이들 손상에 재료별로 보면 그림1(b)와 같이 스테인레스강이 차지하는 비율이 총 1/4에 달하 고 있다. 또한, 별도조사결과에 의하면 각종손상이 용접이음부에서 약 50% 발생하고 있어, 용접 이음부가 부식성환경에서 사용되는 경우에는 이를 부식현상과 그 방지대책을 세우지 않으면 안된다. 용접부에서 이들 부식현상이 발생하기 쉬운 것은 다음과 같은 요인으로 생각된다. (1) 용접내부는 모재와는 다른 금속조직을 가진다. (2) 용접잔류응력이 존재한다. (3) 용접결함이나 이음형식에 의한 형상불연속 놋치화하여 응력집중을 가져온다. 또한 이들이 표 면에 개구한 극간부식을 가질때에는 극간부식의 요인이 된다. 본고에서는 이들 부식현상중 가장 중요한 오-스테이나트계스테인레스강 용접부에서의 응력부식균열 현상에 대하여 설명한다.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.1 s.38
• /
• pp.1-11
• /
• 1999

The aim of this study is to construct a machine vision monitoring system for an automatic visual inspection of weld joint in steel structure. An image processing algorithm for a visual weld defects detection on weld bead is developed using the intensity image. An optic system for getting four intensity images was set as a fixed camera position and four different illumination directions. The input images were thresholded and segmented after a suitable preprocessing and the features of each region were defined and calculated. The features were used in the detection and the classification of the visual weld defects. It is confirmed that the developed algorithm can detect weld defects that could not be detected by previously developed techniques. The recognized results were evaluated and compared to expert inspectors' results.

• Proceedings of the KWS Conference
• /
• 1993.05a
• /
• pp.32-35
• /
• 1993

• Journal of Korean Society of Steel Construction
• /
• v.10 no.1 s.34
• /
• pp.101-113
• /
• 1998

In this study, we research the influence of butt-welded joints in high tension bolted joints on the static and fatigue strength. As a results, if it's located inside or outside of the friction surface, the fatigue strength decrease, and the decrease of fatigue strength is greater in cases that the butt-welded joints exist outside of the friction surface. But the influence of butt-welded joint on the fatigue strength satisfies category B of the Specifications.