• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.1
• /
• pp.26-32
• /
• 2007

This study was carried out fusion-welded butt joints in SWS 490A high strength steel subjected to tensile test that load-deflection curve. The windowed or short-time Fourier transform(WFT or STFT) makes possible for the analysis of non-stationary or transient signals into a joint time-frequency domain and the wavelet transform(WT) is used to decompose the acoustic emission(AE) signal into various discrete series of sequences over different frequency bands. In this paper, for acoustic emission signal analysis to use a continuous wavelet transform, in which the Gabor wavelet base on a Gaussian window function is applied to the time-frequency domain. A wavelet transform is demonstrated and the plots are very powerful in the recognition of the acoustic emission features. As a result, the technique of acoustic emission is ideally suited to study variables which control time and stress dependent fracture or damage process in metallic materials.

• Journal of Welding and Joining
• /
• v.31 no.3
• /
• pp.60-65
• /
• 2013

Ar, $N_2$, and He are the conventional kind of shield gas that are used for laser welding. Many researches on the impact of laser welding shield gas have been done, and it is on going until now. However, there are few studies that analyze the changes and differences of the plasma emission signal. Therefore, in this study, we evaluated the change in the penetration characteristics according to the type of shield gas during fiber laser welding impacts to the plasma signal. As a result, if was checked that the difference in molecular weight of Ar, $N_2$, and He affects to the amount of spatter, and also found that the measured plasma radiation signal changes similar to the order of the molecular weight of the gases. Especially, clear change on the signal intensity per each shield gas was measured through RMS, and found that the shield gas was nothing to do with the FFT analyzed result.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.342-348
• /
• 2005

This study was carried out fusion-welded butt joints in SWS 490A high strength steel subjected to tensile test that load-deflection curve. The windowed or short-time Fourier transform (WFT or SIFT) makes possible for the analysis of non-stationary or transient signals into a joint time-frequency domain and the wavelet transform (WT) is used to decompose the acoustic emission (AE) signal into various discrete series of sequences over different frequency bands. In this paper, for acoustic emission signal analysis to use a continuous wavelet transform, in which the Gabor wavelet base on a Gaussian window function is applied to the time-frequency domain. A wavelet transform is demonstrated and the plots are very powerful in the recognition of the acoustic emission features. As a result, the technique of acoustic emission is ideally suited to study variables which control time and stress dependent fracture or damage process in metallic materials.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.342-349
• /
• 2011

The purpose of this paper is to describe experimental results about the butt welding and bead on plate welding of the high power Continuous Wave (CW) Fiber laser for Ultra-low carbon Interstitial Free(IF) steel plate for gear part of car. After being welded of the gear parts by the fiber laser and electron beam Microstructures of melting zone had been mixed acicular, granular bainitic, quasi-polygonal and widmanstatten ferrite because of a radical thermal diffusion after welding, difference of critical volume and grain size. As a result of experiment, when gear parts were welded by the fiber laser and electron beam, the fiber laser welding has been stable properties without internal defects more than the electron beam welding. Therefore it has the very advantages of welding high quality and productivity more than conventional melting method. The optimal welding processing parameters for gear parts were as follows : the laser power and welding speed were 3kWatt, 30mm/sec respectively. At this time heat input was $21.2{\times}10^3J/cm^2$.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.353-361
• /
• 2012

In this paper, we propose a improvement method of vision inspector for T type welding nut using an auto sorting system. We used edge and thread detection with histogram of image which is captured by machine vision camera. We also used a binary morphology operation for a detection of spot. A major problem in this vision inspector is abnormal operation caused by degradation of image acquired. These degradations caused by oil pollution on conveyer belt. For overcome this problem, we introduce a pre-processing using a masked histogram equalization on the image acquired. Histogram equalization is applied on masked region (nut part) for increase contrast. As a result, we can remove features caused by oil pollution on background and reduce a ratio of abnormal operation from 10.0 % to 0.2 %.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.4
• /
• pp.1-12
• /
• 2007

S45C steel has been widely used in industrial applications, such as crank shafts, gears, main spindles of machine tools, connecting rods, etc., because of its distinguished mechanical property. In the convention arc welding of S45C plates without heat treatments, it is possible for welding defects to take place, such as a void or a hot-crack, due to a high carbon composition of S45C. Laser welding process is widely used in the industrial field due to its numerous advantages: a small heat affected zone(HAZ), deep penetration, high welding speed, single-pass thick section capability, and small distortion after welding. The objective of this research works is to investigate the influence of the process parameters, such as power of laser and welding speed, on the characteristics of laser welding for the case of nickel coated and nickel uncoated S45C steel. As the result of the experiment, in case of butt welding, nickel coated S45C steel has a uniform formation of welding zone and it was judged that the welding nature was better as inner defects and the quantity of spatter were formed relatively fewer than nickel uncoated S45C steel.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.317-323
• /
• 2010

The manual ultrasonic examination for the nuclear power plant piping welds has been demonstrated by using KPD(Korean Performance Demonstration) generic procedure. For automated ultrasonic examination, there is no generic procedure and it should be qualified by using applicable automated equipment. Until now, most of qualified procedures used pulse-echo technique and there is no qualified procedure using phased array technique. In this study, data acquisition and analysis software were developed and phased-array transducer and wedge were designed to implement phased array technique for nuclear power plant in-service inspection. The developed procedure are qualified for performance demonstration for the flaw detection, length sizing and depth sizing. The qualified procedure will be applied for the field examination in the nuclear power plant piping weld inspection.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.393-396
• /
• 1995

In this syudy, the researches classifying the artificial and natural flaws in welding parts are performed using the smart pattern recognition technology. For this purpose the smart signal pattern recognition package including the user defined function was developed and the total procedure including the digital signal processing,feature extraction , feature selection and classifier selection is treated by bulk. Specially it is composed with and discussed using the statistical classifier such as the linear disciminant function classifier, the empirical Bayesian classifier. Also, the smart pattern recognition technology is applied to classification problem of natural flaw(i.e multiple classification problem-crack,lack of penetration,lack of fusion,porosity,and slag inclusion, the planar and volumetric flaw classification problem). According to this results, if appropriately learned the neural network classifier is better than ststistical classifier in the classification problem of natural flaw. And it is possible to acquire the recognition rate of 80% above through it is different a little according to domain extracting the feature and the classifier.

• Computational Structural Engineering
• /
• v.5 no.1
• /
• pp.11-14
• /
• 1992

최근 교량공학자들의 공통관심사는 초대형 구조물을 가설하고, 적절한 유지관리에 의해 기존 구조물의 공용수명을 연장시키는 것 등을 들 수 있다. 고성능 컴퓨터 산업의 발달로 인한 구조해석의 정밀화, 경량골재 및 고강도 재료의 개발, 용접성과 시공법의 발달 및 초대형 크레인과 같은 건설기자재의 개발 등으로 인하여 초대형 구조물의 가설은 외국에서 뿐만 아니라 국내에서도 가능하게 되었다. 그리고 구조물의 공용수명을 연장하기 위해서 최근에는 첨단계측장비와 신호처리기술, 신뢰성이론, 피로파괴이론 및 system identification technique 등의 발달로 인해 비교적 정확하게 교량구조물의 손상부위와 손상정도의 파악이 가능하게 되었다. 그리하여 가까운 시일내에 100년 이상의 공용수명을 갖는 초대형 교량이 출현될 것으로 전망된다. 따라서 교량 공학자들은 앞으로 장대교량의 설계와 시공 및 유지관리의 완전 국산화를 위한 연구에 더욱 박차를 가해야 할 것이다.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.659-662
• /
• 1998

전자부품이나 설계된 회로시스템에 납땜을 하기 위해 인두를 사용하는데 누설전류, 서지전압, 정전기, 적절하지 못한 온도 등 여러 가지 악조건으로 인해 부품의 파괴를 가져온다. 특히 C-MOS로 설계된 소자의 경우는 다른 전자부품 보다 더 민감하기 때문에 파괴될 경우가 다발적으로 발생된다. 따라서 절연저항이 높고, 사용자가 적절한 온도로 제어할 수 있는 인두조절기 설계가 활발히 진행되고 있다. 본 논문에서는, 인두 히터에 센서를 삽입하여 이 저항의 변화율에 따라 온도를 감지하고, 주파수 방해를 최소화할 수 있는 Zero Voltage Switch IC를 사용하여 히터의 온도를 제어하였다. 또한, 사용자가 온도 변화를 알 수 있도록 A/D 변환기를 사용하여 시그먼트로 표시하였다. 기존에 설계된 시스템은 온도를 감지하는 센서가 민감하며 센서에서 감지된 신호가 비교기를 통해서 직접 히터의 온도를 제어하였기 때문에 온도 변화율이 매우 심하고, 이두팁이 분리되어있지 않기 때문에 절연저항이 매우 낮았다. 본 논문에서는, 이러한 문제점을 해결하기 위해 센서의 민감성을 최소화하고, Zero Voltage Switch IC를 사용하여 히터의 온도를 정밀하게 제어하였으며, 절연저항을 높이기 위해 인두팁의 중간에 세라믹을 삽입하여 팁에 온도만 전달될 수 있도록 용접을 하여 기존의 문제점을 개선하였다.