• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.3
• /
• pp.449-455
• /
• 1997

The anisotropic etching behavior of single crystal silicon were studied in aqueous KOH solution. N-type (100) oriented single crystal silicon wafers were used for the study, and the $SiO_2$ layer, whose etching rate is known to be much slower than that of silicon in the KOH solution, was used as a mask for the silicon etching. The silicon etching rate and the etching properties are shown to be a function of etchant temperature uniformity, circulation speed, and circulation direction of the etchant as well as the etchant concentration and the temperature. The etching rate is increased as the temperature is increased from $10\mu \textrm{m}/hr$ to $250\mu \textrm{m}/hr$ in the range of $50^{\circ}C~105^{\circ}C$. Hillock density and height is observed to be correlated with the etchant concentration and the etch temperature. The variation of the hillock density was explained by the ratio between the etching rate of (100) orientation and that of (111) orientation.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.141-141
• /
• 2001

사이즈 프레스용 전분은 주로 산화전분이 이용되고 있으며, 전분업체에서 공급되는 것과 제지공장에서 자가변성으로 제조하여 이용하는 것으로 나눌 수 있다. 자가변성의 경우 경제적 측면에서 원가절감이 가능한 장점이 있는 반면 전분 품질이 다소 미흡한 단점이 있다. 자가변성 산화제로는 APSCAmmonium persulfate), 효소 등이 이용된다. 효소는 APS에 비해 전분 분자 내의 1,4결합만을 가수분해 시키고 점도안정성과 전분 용액 색상이 양호한 특성을 보인다. 또한 온도/농도/점도 등의 상관성을 자유롭게 이용하여 요구하는 전분 용액 품질을 얻을 수 있다. 제지용 전분 산화용으로는 주로 알파 -아밀라아제가 이용된다.본 실험은 산화전분을 효소변성을 이용한 생전분으로 가능성을 알아보고자 진행되었다. 일차적으로 실험실에서 하였고, 몇 차례의 mill trial을 통해 효소변성 전분 적용을 최적화하고자 하였다. 실험실적으로 효소변성을 위한 반응조건으로 온도, 시간, pH, 투입량 등을 설정하였 고, 각 조건별로 제조된 전분 용액의 점도를 측정하여 효소 반응성을 평가하였다. 실험 결과 전분 용액의 점도는 낮았고, 점도 안정성 또한 양호한 수준을 보였다. Cooking농 도는 20%로 하였으나 보다 고농도 cooking의 가능성을 확인할 수 있었다. 시트 물성도 전반적으로 산화전분 대비 대등한 수준을 나타내었다. Mill trial은 무림제지에서 실시하였고 사이즈 프레스 조제식을 이용하였다. 전분 농도는 초기에 20%로 시작하여 30%까지 올려서 trial을 실시하 였고, 그 외 작업조건들은 산화전분 적용 시와 동일하게 하였다. 효소 반응시간으로 인해 cooking시간이 다소 많이 걸렸으나 전반적인 조제 작업은 큰 문제 없이 이루어졌고, 효소변성 전분 용액의 점도는 낮은 수준으로 유지되었다. 사이즈 프레스 작업성이나 시 트 물성도 산화전분 적용 시와 대등한 수준을 보였으나, 전분 차이로 인한 색상 차이로 부가적인 염료 조정이 이루어졌다. 한편 폐수부하 증가를 우려하였으나, 이에 따른 문제는 크게 발생되지 않았다.

• Resources Recycling
• /
• v.12 no.4
• /
• pp.20-29
• /
• 2003

In order to efficiently recycle the waste solution resulting from shadow mask processing, nano-sized Ni-ferrite powder was fab-ricated through spray pyrolysis process. The average particle size of the powder was below 100nm. In this study, the effects of the reaction temperature. the concentration of raw material solution and the injection speed of solution on the properties of powder were respectively investigated. As the reaction temperature increased from $800^{\circ}C$ to $1100^{\circ}C$, average particle size of the powder significantly Increased and power structure became more solid, whereat its specific surface area was greatly reduced. Formation rate and crystallization of($NiFe_2$$O_4$) phale increased along with the temperature rise. As the concentrations of iron and nickel components in wastere solution increased, particle size of the powder became larger, particle size distribution became more irregular, and specific surface area was reduced. Formation rate and crystallization of $NiFe_2$$O_4$ phase increased significantly along with the increase of the concentration of solution. As the inlet speed of solution increased, particle size of the powder became larger, particle size distribution became wider, specific surface area was reduced and powder structure became less solid. As the inlet speed of solution decreased, formation rate and crystallization of $NiFe_2$$O_4$ phase significantly increased.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.512-515
• /
• 2008

The removal of iron from neodymium chloride solution was carried out by solvent extraction using Alamine 336 in kerosine. The effect of Alamine 336, hydrochloric acid and chloride ion concentrations on the extraction of Fe were studied. The results showed that Alamine 336 as an extractant for removal of iron was effective and the extraction percentage of iron was increased with increasing hydrochloric acid and chloride ion concentration in aqueous solution. The extraction of 99% of iron is attained at a ratio of A/O = 4 by distilled water. The stripping yield of iron from loaded Alamine 336 decreased with decreasing hydrochloric acid concentration in stripping solution.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.272-276
• /
• 2011

The separation of metallic and semiconducting single-wall carbon nanobubes (SWCNTs) by agarose gel method was carried out in this study. The effect of concentration of agarose, SDS (sodium dodecyl sulfate), and pH in the solution on separation behavior was investigated. With increasing the concentration of agarose in the solution, it showed that the ratio of metallic SWCNTs, which was analyzed from UV-vis-NIR spectroscopy, was increased in the solution phase, while the overall concentration of SWCNTs was decreased. With increasing the concentration of SDS, we could observe that the ratio of metallic SWCNTs was increased due to more affinity between SDS molecules and metallic SWCNT. The highest metallic SWCNTs ratio was reached up to 58.4% when the pH of solution was 8.2.

• Analytical Science and Technology
• /
• v.27 no.6
• /
• pp.269-276
• /
• 2014

A short study for the uncertainty of post column isotope dilution method has been performed for the analysis of Selenomethionine in HPLC-ICP/MS. Major error sources studied were concentration and the flow rate of Se isotope solution, atomic weights of Se in spike and sample, and isotope ratio measured for the spiked sample. Uncertainties were obtained for each factor and the contribution for the total concentration uncertainty was 54.4% and 0.61%, 0.0072% and 0.018%, and 45.0%, respectively. The biggest contribution factor was concentration of the spike solution and the second was the isotopic ratio measured for the spiked sample solution. The mass flow rate of spike and atomic weights did not show much contribution. The calculated total uncertainty was $1.46ng{\cdot}g^{-1}$ for the standard SeMet ($126.30ng{\cdot}g^{-1}$). The experimental result was $127.09{\pm}1.46ng{\cdot}g^{-1}$ and the relative uncertainty was 1.20%.

• Research in Plant Disease
• /
• v.15 no.2
• /
• pp.130-133
• /
• 2009

We have conducted in vitro experiments with nano-silver liquid for their effect against various plant pathogenic bacteria. Different types of nano-silver liquid WA-CV-WA13B, WA-AT-WB13R and WA-PR-WB13R were used. These are classified based on different manufacturing processes. The tested bacteria were provided by KACC. We experimented ten bacterial isolates in Clavibacter, Erwinia, Pseudomonas, Ralstonia, and Xanthomonas genera. In order to determine the level of concentrations of control effects, different concentrations (10, 25, 50, and 100 ppm) of each different nano-silver liquid were added in the culture media. As a result, WA-CV-WA13B showed high inhibition effect against C-1 at 10 ppm, and showed minor inhibition effects against P-6, X-1, and X-2. WA-AT-WB13R showed bactericidal effect against P-6 at 10 ppm. At 10 ppm, WA-AT-WB13R showed relatively high inhibition effects against C-1, X-1, and X-2. WA-PR-WB13R showed bactericidal effects against P-5, P-6 and X-2 at 10 ppm or higher concentrations. All the tested three nano-silver liquid showed bactericidal effects against all the tested plant pathogenic bacteria at concentrations of 25 ppm or higher. These results indicated the possible use of nano-silver liquid for the control of plant pathogenic bacteria.

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.313-319
• /
• 2001

In order to produce the high quality rehydrated acorn Mook(Korean tradition gel flood) that enhance acceptability, the optimum condition was investigated for the rehydration process of dried Monk as salt concentration(0, 1, 2%), temperature(20, 70, 80, 90$^{\circ}C$) and time. The estimation of moisture gain, rehydration efficiency was analyzed statistically. The surface color md seniory evaluation were undertaken to evaluate the rehydrated Mook quality The optimum rehydration time was decided to 15 minutes and it takes 3 minutes for the cooling tilde. The moisture gain increased as the rehydration temperature increase. And the moisture gain and moisture gain rate were higher at 1% salt solution than other concentration. As the rehydration efficiency, surface color and sensory properties of rehydrated Mook, 1% salt treatment was superior.

• The Korean Journal of Rheology
• /
• v.7 no.3
• /
• pp.181-191
• /
• 1995

점탄성유체의 물성치들 중 정압열팽창계수 및 밀도는 자연대류 열전달 연구에 전단 속도 0에서의 점도는 점탄성유체에 대한 모델들 사용 시 필요하다. 본 연구에서는 점탄성유 체이며 마찰 감소 첨가제, 유전자 분리용액동으로 사용하는 Separan AP-273 용액의 정압열 팽창계수, 밀도 및 전단속도 0에서의 점도에대한 농도 및 온도의 영향을 조사하였다. 작동유 체의 물성치들은 10~6$0^{\circ}C$의 온도범위와 100~20,000wppm의 농도범위에서 측정되었다. 작 동유체의 물성치들에 미치는 열주기와 노화의 영향을 조사하기 위해서 정압열팽창계수와 전 단속도 0에서의 점도를 교대로 두 번씩 측정했다. 정압열팽창계수 및 밀도를 측정하는 장치 의 측정 정밀도는 증류수에 대한 측정치와 문헌에 나타난 자료를 비교하여 얻었고 이는 $\pm$ 2%이내였다. Separan AP-273용액의 정압열팽창계수 및 밀도는 증류수의 값들로 대치될수 있다. 작동유체의 정압열팽창계수와 밀도는 열주기와 노화의 영향을 받지 않았다. 낙하식 점 도계를 사용해 측정한 겉보기점도 값들을 나타내느 flow curve에서 전단속도가 0이 되는방 향으로 겉보기점도를 외삽시켜 Separan AP-273용액에 대한 전단속도0에서의 점도를 얻었 다. 정압열팽창계수 측정 전후에 측정한 작동유체에 대한 전단속도 0에서의 점도는 열주기 와 노화로 인해 퇴화되었다.

• Journal of Chest Surgery
• /
• v.29 no.10
• /
• pp.1066-1075
• /
• 1996

To compare the efficacy of cardiac preservation, we examined purine metabolites during 24 hours of cold storage($0^{\circ}C$) of the Korean ongrel dog hearts after using three different types of cardioplegic solutions. The hypothermic arrest with total cardiopulmonAry bypass method was employed in 51. Thomas solution(575) and blood cardioplegic solution(BCPS) preservation cases. Specimens were analyzed for levels of adenine nucleotides and their precursors by high performance liquid chromatography. The ATP content in the UW(University of Wisconsin) solution group tends to be higher than that of the combined hypothermic arrest group(575 and BCPS groups) after 2,4,8, and 12 hours of preservation respectively, but there were no significant differences between 575 and BCPS groups. The ADP contents in the UWS and BCPS groups were higher than that of the 575 group at 4,8, 12, and 24 hours, but the difference was not statistically significant between UWS and BCPS groups. The AMP contents did not change significantly in the three groups. The adenosine, Inosine, and hypoxanthine concentrations increased progressively, but the lev l of xanthine was very low in the three groups.