• Journal of Adhesion and Interface
• /
• v.8 no.3
• /
• pp.16-23
• /
• 2007

Polyester fabrics and knits were corona treated with different current intensity (5, 10, 15, 20 A) and feeding speed (5, 10, 15 m/min). We confirmed the surface change of polyester fabrics and knits using scanning electron microscopy (SEM) and X-ray photoelectron spectrometer (XPS). And the change of physical properties through measuring the tensile strength, dry and wet bonding strength. Thermosetting reactive polyurethane hot melt adhesive was used in the adhesion of polyester fabrics and knits. Functional groups were introduced on PET fabrics and knits surface by treating the PET fabrics and knits in air atmosphere with corona discharge, and take placed unevenness, the result adhesion was improved. When consider both dry and wet bonding strength, we think that appropriate conditions in the PET fabrics corona treatment are feeding speed 10 m/min, current intensity 15 A and appropriate conditions in the mesh type PET knits corona treatment are feeding speed 10 m/min, current intensity above 10 A.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.6
• /
• pp.519-527
• /
• 2021

In this study, an electromagnetic pulse shielding effect was obtained by applying the arc metal spraying method to the ordinary concrete. For this study, to evaluate the electrical properties in the thickness of the metal sprayed coating, 8 types of metals(Cu, CuAl, CuNi, CuZn, Al, Zn, ZnAl, AlMg) were sprayed as coatings with a thickness of 100, 200 and 500㎛. The electrical conductivity on the surface was measured with a 4-pin probe, and an electromagnetic wave shielding effect test was performed according to KS. Based on the test results, 200 ㎛ was proposed as an optimal metal coating thickness for electromagnetic pulse shielding, and it was thermally sprayed on a 300×300×100mm concrete specimen to analyze the electromagnetic wave shielding performance. However, in the area of adhesion strength, the maximum was 1.11MPa, which was found to be less than 74% of the target performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.1026-1029
• /
• 2005

The feasibility of graphoepitaxial growth of compound semiconductors has been studied. Two kinds of substrates were prepared; one is smooth substrate, the other one is a periodic structured substrate. ZnO film was formed on both substrates by thermal evaporation of elemental Zn and natural oxidation of the deposited Zn. Thermal treatment was performed to improve the crystal quality and to investigate the effect of the periodic structure. Atomic force microscopy (AFM) and photoluminescence (PL) were used to characterize the samples. As a result, the improvement of crystallinity as annealing temperature increase, has been observed from both samples. The samples, annealed at 800 $^{\circ}$C, show the best crystal quality in terms of PL linewidth. Also the sample grown on grating structure shows better crystal quality than the sample grown on flat substrate. It implies that the periodic structure affects the crystallinity of the films, and the graphoepitaxy of compound semiconductors is possible by using appropriate surface structure.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.2
• /
• pp.234-240
• /
• 1997

Agar has widely been used as medical aids and food ingredients due to its pecular physicochemical and rheological properties. In this paper, the effects of spray drying and extrusion drying on functional properties of agar were investigated to clarify the sol-gel transition mechanism at low temperature and microstructure of agar gel by measuring phase transition by differential scanning calorimetery, structural differences by light microscope and scanning electron microscope observation. The lowest endothermic onset(To), peak(Tp), conclusion(Tc) temperature and enthalpy($\Delta$H) using differential scanning calorimetery were showed in extrusion-dried agar wic were checked in 41.30, 61.72, 80.50 and 0.73cal/g. In cases of unmodified and spray-dried, the values were 81.20, 95.51, 112.14 and 3.22cal/g, and 60.11, 76.45, 89.54 and 1.53cal/g, respectively. When all samples were reheated using differential scanning calorimetery after gelling fully, no significant differences of endothermic To, Tp, Tc and $\Delta$H appeared. The surface structure of unmodified agar powder observed by light microscope and scanning electron microscope appeared a continuous surface without any indication of small pores, gaps or point of discontinuity. In cases of spray-dried agar, the unstable structures with pores was resulted. The microstructures of extrusion-dried agar, however, was solid with large gaps and areas of discontinuity in the surface. From the results above, it was suggested that significant differences in phase transition and surface microstructures were clearly related to the physicochemical changes and rheological properties, solubility and gelling ability of the types of agar gel.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.313-313
• /
• 2014

GaN계 물질 기반의 광 반도체는 조명 및 디스플레이 관련 차세대 광원으로 많은 관심을 받고 있고, 효율 증대를 위한 에피, 소자 구조 및 패키지 등의 많은 연구가 진행되고 있다. 특히, 투명 전극을 이용한 광 추출 효율의 증가에 대한 연구는 전체 외부양자효율을 증가시키는 중요한 기술로 각광을 받고 있다. 이러한 투명전극은 가시광 영역의 빛을 투과하면서도 전기 전도성을 갖는 기능성 박막 전극으로 산화인듐주석이 널리 사용되고 있으나 인듐 가격의 상승과 산화인듐주석 전극 자체의 크랙 특성으로 인하여 많은 문제점이 지적되고 있다. 이러한 문제를 극복하기 위하여 GaN계 발광 다이오드에 있어서 산화인듐주석 투명 전극의 대체 물질들에 대한 많은 연구들이 활발하게 이루어 지고 있다. 특히, 투명전극 층으로 사용되는 산화인듐주석 대체 박막으로 산화아연에 대한 연구가 각광을 받고 있는 실정이다. 또한, 발광 다이오드의 효율 증가를 위해 발광소자에 표면 요철 구조 형성과 나노구조체 형성 등 박막 표면의 구조 변화를 통한 광추출효율 향상에 대한 많은 연구가 진행되고 있다. 본 연구에서는 산화아연 박막을 투명전극으로 사용하였으며 광추출효율 향상을 위해 산화아연 투명전극에 패터닝을 형성하고, 그 위에 산화아연 나노막대를 형성하여 기존에 사용하던 산화아연 투명전극보다 우수한 추출효율 및 전류 퍼짐 향상 구조를 제안하고 이에 따른 LED 소자의 광추출효율 향상을 연구하였다. 금속유기화학증착법을 이용하여 c-면 사파이어 기판에 n-GaN, 5주기의 InGaN/GaN 다중양자우물 구조 및 p-GaN의 간단한 LED구조를 성장한 후, p-GaN층 상부에 원자층 증착법을 이용하여 투명전극인 산화아연 박막을 60 nm 두께로 증착하였다. 산화아연 투명전극만 증착한 LED-A와 이후 0.1% HCl을 이용한 습식식각을 통하여 산화아연 투명전극에 육각형 모양의 패턴을 형성한 LED-B, 그리고 LED-B위에 전기화학증착법을 이용하여 $1.0{\mu}m$의 산화아연 나노 막대를 증착한 LED-C를 제작하였다. LED-A, -B 및 -C에 대한 표면 구조는 SEM이미지를 통하여 확인한 바 산화아연의 육각 패턴과 그 상부에 산화아연의 나노막대가 잘 형성된 것을 확인하였다. I-L 분석으로부터 패턴이 형성되지 않은 산화아연 투명전극으로만 구성된 LED-A에 비하여 산화아연 투명 전극에 육각 패턴을 형성한 LED-B의 전계 발광 세기가 더욱 큰 것을 확인하였다. 또한, 육각 패턴에 산화아연 나노막대를 성장시켜 융합구조를 형성한 LED-C에서는 LED-B와 -A보다 더 큰 전계 발광세기를 확인할 수 있었다. 특히, 인가 전류가 고전류로 갈수록 LED-C의 발광세기가 더욱 강해지는 것으로 효율저하현상 또한 나노융합구조의 LED-C에서 확인할 수 있었다. 이는 기존 산화아연 투명전극에 육각형의 패턴 및 나노막대융합구조를 형성할 경우 전류퍼짐현상을 극대화 할 뿐 아니라, 추가적인 광추출효율 향상 효과에 의해 질화갈륨 기반LED 소자의 광효율이 증가된 것으로 판단된다.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.757-765
• /
• 1998

This study was performed to investigate the influence of fuel/oxygen ratio (F/O= 3.2, 3.0, 2.8) on the oxidation behavior of two kinds of (20wt%NiCr claded $\textrm{Cr}_{3}\textrm{C}_{2}$, and 7wt%NiCr mixed $\textrm{Cr}_{3}\textrm{C}_{2}$) composite powder with different manufacturing method. The results show that the oxidation behavior between the 20wt% NiCr claded $\textrm{Cr}_{3}\textrm{C}_{2}$ and 7wt% NiCr mixed $\textrm{Cr}_{3}\textrm{C}_{2}$ coating was widely different. The surface morphology of the coating composed of 7wt% NiCr mixed $\textrm{Cr}_{3}\textrm{C}_{2}$ was changed to porous with F/O ratio by the aggressive evolution of gas phases($\textrm{CO}_2$, CO and $\textrm{CrO}_3$) and the oxide cluster composed of Ni and Cr were grown after oxidation at $1000^{\circ}C$ for 50 hours. But the surface morphology of the coating composed of 20wt% NiCr claded $\textrm{Cr}_{3}\textrm{C}_{2}$ was not changed to porous after oxidation at $1000^{\circ}C$ for 50 hours. Therefore, the reason for high oxidation rate is due to activation of $\textrm{Cr}_{3}\textrm{C}_{2}$ to oxidation by entrapped oxygen gases within coating layer, and to closely relate with the decomposition of $\textrm{Cr}_{3}\textrm{C}_{2}$ to $\textrm{Cr}_{7}\textrm{C}_{3}$ phase. Accordingly, On the evidence of these results, the study about the oxidation behavoir of the HVOF sprayed $\textrm{Cr}_{3}\textrm{C}_{2}$ coating depending on hydrogen flow rate must be done.

• Journal of the Korean Vacuum Society
• /
• v.20 no.3
• /
• pp.217-224
• /
• 2011

of materials and simplification of process. Micro-blasting is one of the promising method for recycling of waste wafer due to their simple and low cost process. Therefore, in this paper, we make recycling wafer through the micro-blaster. A surface etched by micro-blaster forms particles, cracks and pyramid structure. A pyramid structure formed by micro-blaster has a advantage of reflectivity decrease. However, lifetime of minority carrier is decreased by particles and cracks. In order to solve this problems, we carried out the DRE(Damage Romove Etching). There are two ways to DRE process ; wet etching, dry etching. After the DRE process, we measured reflectivity and lifetime of minority carrier. Through these results, we confirmed that a wafer recycled can be used in solar cell.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.1
• /
• pp.1-13
• /
• 2011

The aim of this study was to evaluate shear bond strength of pressed reinforced composite resin ($TESCERA^{TM}$ ATL) veneering to zirconia with various surface treatments. Forty sintered zirconia specimens and forty pockmarked zirconia specimens were fabricated. All the materials were categorized as Group 1 (Control : porcelain veneering on zirconia surface), Group 2 ( $TESCERA^{TM}$ ATL dentine veneering after bonding agent application on zirconia surface), Group 3 ($TESCERA^{TM}$ ATL dentine veneering on pockmarked zirconia surface), Group 4 ($TESCERA^{TM}$ ATL dentine veneering after bonding agent application on pockmarked zirconia surface), Group 5 (Thermocycling on Group 1), Group 6 (Thermocycling on Group 2), Group 7 (Thermocycling on Group 3), and Group 8 (Thermocycling on Group 4). SBS(Shear bond strength) of 8 groups was determined with an Instron Universal Testing Machine. Also fractured surface of specimens were observed with a scanning electron microscope. There were no significant differences in the initial SBS between Group 1(control group), Group 3, and Group 4. (p>0.05) Group 2 presented the lowest SBS values. There was a no significant difference between just as 24hour water storage and simulated aging on pockmarked zirconia groups. (p>0.05) A formation of pockmarked irregularities on zirconia surface as mechanically pitted surface was reliable method for establishing a stronger bond between $TESCERA^{TM}$ ATL and zirconia-based material.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.803-812
• /
• 1998

The purpose of this study was to evaluate the shear bond strength and failure mode of ceramic brackets according to the surface treatment of porcelain. Sixty Porcelain samples were randomly divided into six groups of ten samples. Then they were treated as follows: Group 1(silane only), Group 2(etching+silane), Group 3(stone+silane), Group 4(sandblasting+silane), Group 5(stone +etching+silane), Group 6(sandblasting+etching+silane) After surface treatment of porcelain, sixty Transcend 6000 brackets were bonded to the prepared porcelain surface and they were stored in $37^{\circ}C$ saline for 24 hours. An Instron universal testing machine was used to test the shear bond strength of ceramic brackets to porcelain. After debonding, bases of ceramic brackets and porcelain surfaces were examined under scanning electron microscope(SEM) to determine failure mode. Statistical analysis of the data was carried out with one-way ANOVA and Duncan's multiple range test. The results were as follows : 1. The shear bond strength of surface-treated groups 2 to 6 was higher than that of only silane-treated group 1, and there was statistical significance. (P<0.05) 2. There was no significant difference among the groups 3 to 6. (P>0.05) 3. The shear bond strength of etching-surface treated group 2 was significantly lower than those of sandblasting-surface treated group 4, complex surface treated group 5 and group 6. 4. According to the scanning electromicroscopic images, the surface roughness of sandblasting-surface treated group 4 was less than those of the group 5 and 6, but there was no significant difference in the shear bond strength. (P>0.05) As a conclusion we can have a clinically adequate bond strength when an application of silane is done after the treatment of porcelain surface with more than one way to bond ceramic bracket on the porcelain. Also, it is considered that the sandblasting and application of silane is effective for the simplication and convenience of the treatment.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.729-732
• /
• 2012

Herein we report the in-situ synthesis and direct decoration of chalcogenide naoparticles (NPs) onto multiwalled carbon nanotubes (MWCNTs) through an ionic liquid-assisted sonochemical method (ILASM). The as-obtained MWCNT/$BMimBF_4$/CdTe, MWCNT/$BMimBF_4$/ZnTe and MWCNT/$BMimBF_4$/ZnSe nanocomposites were characterized by TEM images and EDS spectra. In particular, the morphologies of nanocomposites such as bump-like, rough, and smooth core-shell structures were strongly influenced by the type of precursors and the interactions with MWCNT. This synthetic strategy opens a new way to directly synthesize and deposit semiconducting NPs (s-NPs) onto CNTs, which consist of binary components obtained from two precursors with different reaction rates.